Geochemical and Mineralogical Characterization of Ore – Mineral Assemblages from Black Sands in Akure South Area, South - Western Nigeria
- Authors
-
-
O. O. Alabi
School of Engineering and Engineering Technology, Federal University of Technology, Akure
-
T. A. Olatunji
School of Engineering and Engineering Technology, Federal University of Technology, Akure
-
Y. Gbadamosi
School of Engineering and Engineering Technology, Federal University of Technology, Akure
-
- Keywords:
- Characterization, Geochemical, Mineralogical, Interlocking, Black sand
- Abstract
-
The geochemical and mineralogical features of Black sand in Akure South was investigated. The head samples were sourced from four different locations and mixed properly for homogenization. 200 g crude sample was sampled out, finely ground using the Denver Ball Mill, Model: Denver D10 and prepared towards characterization. Chemical Characterization of the crude sample was carried out using Energy Dispersive X-ray Fluorescence Spectrometry (ED-XRF) - Minipal 5. Mineralogical Analysis was carried out using Scanning Electron Microscopy with Energy Dispersive X-Ray Spectrometer (SEM-EDS) and X-ray Diffraction Analysis (XRD). ED-XRF analysis revealed that the crude sample contains 17.55 % Fe2O3, 63.7 % SiO2, 15.5 % TiO2, and other compounds in trace form. Mineralogical analysis of the black sand via XRD revealed the present of Quartz (87.07 % SiO2), Magnetite (0.59 % Fe3O4), Ilmenite (9.89 % FeTiO3) with other associated minerals such as Rutile (0.53 % TiO2), Anatase (0.25 % TiO2), Kaolinite (0.09% Al2 (Si2O5(OH)4) and Albite (1.57% Na(AlSi3O8)). SEM images revealed interlocking of some minerals within the crystal aggregates of the crude black sand and the EDS of these microstructures revealed the presence of Al, Mn, Cu, O, Si, C, Fe and Ti; silicon, titanium and iron are the major elemental constituents of the matrix.
- References
- Downloads
- Published
- 2019-05-14
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- Isa, I, Ajaka E.O, EFFECTIVENESS OF GRAVITY SEPARATION TECHNIQUES FOR THE BENEFICIATION OF DERU SILVER-GOLD ORE, BAUCHI STATE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 2 (2023): FUTA Journal of Engineering and Engineering Technology
- A. J. Abegunde, B. V. Omidiji, P. O. Ajewole, Characterization of Ado-Ekiti River Sand for foundry applications , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 2 (2017): FUTA Journal of Engineering and Engineering Technology
- Omotehinse, A. O., PROSPECTS OF OIL SAND MINING IN NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 1 (2023): FUTA Journal of Engineering and Engineering Technology
- P. A. Adesida, W. A. Salawudeen, ASSESSMENT OF THE INFLUENCE OF MECHANICAL PROPERTIES AND MINERALOGICAL COMPOSITION ON FRAGMENTATION OF SELECTED GRANITIC ROCKS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 1 (2026): FUTA Journal of Engineering and Engineering Technology
- Malomo, B.O., CRASHWORTHINESS AND ENERGY ABSORPTION ANALYSIS OF MESOCARP COIR-FIBRE/EPOXY RESIN-REINFORCED GLASS FIBER HYBRID COMPOSITE LAMINATE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 2 (2023): FUTA Journal of Engineering and Engineering Technology
- Dung, M. D.,, Anowai, S.I, Peter, J.A, Dapiya, S.H, Okechalu, J.N, Mawak, J.D, ASSESSMENT OF THE COMPRESSIVE AND SPLITTING TENSILE STRENGTHS OF BIOCONCRETE FROM UREOLYTIC BACTERIA. , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 2 (2023): FUTA Journal of Engineering and Engineering Technology
- AWOPETU, O. O, OWOYEMI, J. M, BABATUNDE, T. P. , OJO, O. T., DEVELOPMENT OF A TRANSFORMABLE FURNITURE SYSTEM: FROM SHELVING UNIT TO FUNCTIONAL TABLETOP , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- S. O. Osuji, P. N. Ogbeifun, Strength Properties of Stabilised Laterite as Replacement of Sand in Sandcrete Block Production , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 2 (2015): FUTA Journal of Engineering and Engineering Technology
- D. T. Oloruntoba, S. O. Seidu, Effect of Mill Scale Particulate in Sand Mould on the Microstructure and Mechanical Properties of Cast 6063 Aluminium Alloys , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 2 (2014): FUTA Journal of Engineering and Engineering Technology
- Odeyemi, C. S, Olaniyan, O. M, Sobowale, A. A, DEVELOPMENT OF REAL TIME HOME AUTOMATION SYSTEM WITH SMS ALERT ON NIGERIA GSM NETWORKS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.