EFFECT OF FLOAT-WEIGHTS ON DISCHARGE MEASUREMENT
- Authors
-
-
Abayomi Olayiwola Eruola
Federal University of Agriculture, Abeokuta
-
Akeem Makinde
Federal University of Agriculture, Abeokuta
-
Gbenga Adegboyega Eruola
Federal University of Agriculture, Abeokuta
-
Kolawole Ayoola
Federal University of Agriculture, Abeokuta
-
Lugard Nwamini
Federal University of Agriculture, Abeokuta
-
- Keywords:
- Float, Weight, Stream Flow, Velocity
- Abstract
-
The use of float method of discharge measurement information in rivers is vital for hydrological analysis, though there is no specific information on the choice of float material to be used for the measurement. A comparison of four float materials having different weight for estimation of stream discharge was carried out on Apakula stream in Ogun State, Southwestern Nigeria. Depth and width measurements were carried out by means of a canoe, ropes and graduated metal rod. Velocity measurement was carried out by means of Table tennis egg, Orange, 0.5 and 1 liter plastic bottle partially filled with water and a stop clock. Ten different measurements were carried out at various locations along the river. Data were subjected to one – way ANOVA using the Genstat statistical package discovery edition 3 to determine the weekly mean and standard deviation of estimated discharge records for the stream. Results show significant difference (p < 0.05) in discharge measured with varying weight of floats. It was observed that though the pattern of discharge measured values were similar in all the selected float weight, the discharge increases with decreasing weight of float.
- Author Biographies
- References
-
Arora K. R (2009). Irrigation, Water Power and Water Resources Engineering.Publisher – Jain A.K for Standard Publishers Distributions, 1705-B, NAI SARAK, Delhi.
Biran Adrian, López-Pulido Rubén, 2014. Basic ship hydrostatics. Ship Hydrostatics and stability (2nd edition ). 23 – 75p. https://doi.org/10.1016/B978-0-08-098287-8.00002-5
Callade J; Kosuth P; Guyot J.L; Guimaraes V. S.(2000).Discharge determination by acoustic Doppler current profilers (ADCP): a moving bottom error correction methed and its application on the river Amazon at Obidos. Hydrological Sciences Journal, Vol. 45 No: 6 pp 911-924.
Chen Y. C; Chiu C. L. (2004). A fast method of flood discharge estimation. Hydrological processes, Vol. 18 pp 1671 – 1684.
John D. Fenton and Robert J. Keller (2002). The Calculation of streamflow from Measurement of stage . Cooperative Research Centre for catchment Hydrology. Flood Hydrology Program report
John Fulton and Joseph Ostrowski (2008). Measuring real-time streamflow using emerging technologies: Radar, hydroacoustic, and the probability concept.U. S. Geological Survey, Pennsylvania Water Science Center and Atlantic River Forecast Center USA.
Muste, M., Fujita, I., Hauet, A. (2008). Water Resources Research., 44 (1): 44-52. https://doi.org/10.1029/2008WR006950
Oberg, K and Mueller, D. S. (2007).Validation of streamflow measurement s made with Acoustic Doppler current Profilers. Journal of Hydraulic Engineering, Vol. 133 No: 12 pp 1421-1432.
Otuagoma, S. O.; Ogujor, E. A. and Kuale, P. A. (2015). Comparative measurement of stream flow in the ethiope River for small hydropower development. Nigerian Journal of Technology (NIJOTECH). Published by Faculty of Engineering, University of Nigeria, Nsukka, Vol. 34 No. 1. 84 – 192pp.
Rantz, S.E. (1982), Measurement and computation of streamflow, USGS Water Supply Paper, 1
- Downloads
- Published
- 2021-04-06
- Section
- Articles
- License
-
Copyright (c) 2021 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- Emem Ayankop Andi , Ja’afaru Yahaya Bawa, Emem A. A, ’afaru Y. B, EFFECT OF DRILLING PARAMETERS ON DRILLING PERFORMANCE FACTORS IN HORIZONTAL WELLS USING SIMULATION APPROACH. , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- Oluyemi-Ayibiowu B. D, Bello, O, Falola, K. E, A Feasibility Study of Using Electronic Waste as Bitumen Modifier for Sustainable Road Construction and Maintenance , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 2 (2025): FUTA Journal of Engineering and Engineering Technology
- M. A. Akintunde, K A ADETORO, T. J. Abioye, Development of Refrigeration System for Storage and Preservation of Yam Tubers , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- Adewuyi, Gideon Akinyemi, Daso, Akindele Wellington, Oke, Peter Kayode, INVESTIGATION AND CHARACTERIZATION OF ELEMENTAL COMPOSITION OF SOLAR PANEL , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- O O. Daramola, MECHANICAL PROPERTIES AND WEAR BEHAVIOUR OF KAOLINITE CLAY PARTICLES REINFORCED EPOXY MATRIX COMPOSITES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- Adeyemo A. J., AMELIORATION OF DIFFERENT SOIL TYPES CONTAMINATED WITH SPENT HYDROCARBON. , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- E. O. Ajaka, O. C. Chukwuma, Promax2100: A Computer Programme for Design and Optimization of Mineral Processing Plant , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 1 (2014): FUTA Journal of Engineering and Engineering Technology
- A. P. Olalusi, M. S. Obot, A. S. Ogunlowo, Modelling the Dehydration Characteristics of Taro (Colocasia Esculenta) Slices in a Convective Cabinet Dryer , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 1 (2014): FUTA Journal of Engineering and Engineering Technology
- Ayoola Jongbo, Adekunle T. Atta, Ian Moorcroft, EVALUATION OF THE INDOOR AIR VELOCITY OF A SIDEWALL INLET AND ROOF EXHAUST VENTILATED BROILER SHED USING COMPUTATIONAL FLUID DYNAMICS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- Ogundele, O. J, Adebisi, O. I, Adejumobi, I. A, Amusa, K. A. , Alabi, A. A, POWER QUALITY ENHANCEMENT IN AN ELECTRICAL DISTRIBUTION NETWORK USING SHUNT PASSIVE FILTER , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.
