Spatio-Temporal Analysis of Temperature Trend Of Hadeija-Jama’are River of the Chad Basin in Northern Nigeria
- Authors
-
-
I. M. Sanni
Ahmadu Bello University Zaria, Nigeria
-
H. A. Ahmed
Ahmadu Bello University Zaria, Nigeria
-
U. A. Abubakar
Ahmadu Bello University Zaria, Nigeria
-
S. A. Abdullahi
Ahmadu Bello University Zaria, Nigeria
-
- Keywords:
- Non-parametric tests, Time series analysis, spatial distribution, local climate variability
- Abstract
-
Time series of temperature dataset was analyzed using the installed packages of non-parametric Mann–Kendall (MK) test, Sen.slope test and Pettitt’s test in R Programming; freely available user-friendly software, to reveal the characteristics of the dataset and the basin response to local climatic variability. The selected non-parametric tests were recommended by the World Meteorology Organization (WMO) for the analysis of hydro-climatic time series data. Geographical Information System (GIS) was used to delineate the watershed extent (Hadeija-Jama’are River Basin) and projected to WGS 1984 UTM Zone 32N. The basin is an integral of Lake Chad Basin that lies between 13oN and 10.50oN, 7.50oE and 10.75oE. Daily radar hydro-meteorological dataset of maximum temperature was downloaded from fifteen satellite points over the basin. Each satellite point consists of thirty-two years (1982 to 2013) daily data. Man-Kendall trend tests that revealed the direction and significance of trend in time series showed that, there exist increases in temperature trend at a significance level of 95%. The Sen Slope statistical test that quantified the trend in the temperature revealed an increase at an average linear rate of approximately 0.1oC from 1982 to 2013. The Pettitt’s test showed that the increases in the temperature trend started in the year 1998. The spatial analysis done using GIS showed that the temperature increases form the southern to northern and from western to the eastern part of basin in the range of 33.2oC to 38.5oC. The analyses provided evidence that the basin is responding to increases in localized temperature, as revealed by the non-parametric tests. It suggests that the basin will be vulnerable and strongly impacted by local climate variability, with extensive consequences for human societies and the ecosystems.
- References
- Downloads
- Published
- 2020-04-09
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- O. O. Awopetu, P. K. Farayibi, K. A. Ismail, Optimization of Major Process Parameters for Surface Roughness of ASTM 25 Grey Cast Iron using Taguchi method , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 2 (2017): FUTA Journal of Engineering and Engineering Technology
- T. S. Mogaji, A. Akinsade, M. A. Akintunde, Pyrolysis of Sugarcane Bagasse for Bio-Oil Production , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- O. S. Oyerinde, John A. V. Olumurewa, D. Fajobi, DRYING KINETICS OF FISH (Clarias gariepinus) SMOKED WITH BIOGAS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- W. O. Apena, K. F. Akingbade, Modelling of Electric Power Subsystem for a Weather Balloon Microsatellite , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 1 (2017): FUTA Journal of Engineering and Engineering Technology
- P. M. Enyong, Performance of a Short Transmission Line Module under Various Loads: A Comparative Evaluation , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 2 (2018): FUTA Journal of Engineering and Engineering Technology
- Oluwatoyin Olaseinde, O. Ajanaku, O. M. Ojo, S. O. Seidu, COMPARATIVE STUDY OF THE REINFORCED STEEL BARS OBTAINED FROM A FAILED RESIDENTIAL BUILDING AND THE SHELVES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- A. E. Owoputi, Issues in Safety and Security in Maritime Transportation, Port and Marine Environment , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 2 (2014): FUTA Journal of Engineering and Engineering Technology
- F I OTU, E I BELLO, T I OGEDENGBE, L LAJIDE, FOURIER TRANSFORM INFRARED SPECTROSCOPIC ANALYSIS OF RUBBER SEED OIL AND ITS BIODIESEL , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- W. A. Raheem, A. O. Ajayeoba, K. A. Adebiyi, O. R. Oyetunji, O. A. Ayeyemi, Ergonomic Evaluation of Base Transceiver Station Maintenance Personnel in Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- A D Dada, BRIDGING RESEARCH-INDUSTRY DIVIDE IN FOOD AND BEVERAGE ENTERPRISES: EMPIRICAL EVIDENCE FROM SOUTHWESTERN NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.