Evaluation of Akure 132kV Transformer Substation Load Growth Trend
- Authors
-
-
T. O. Ale
FEDERAL UNIVERSITY OF TECHNOLOGY AKURE, ONDO STATE
-
- Keywords:
- Growth trend, Load forecast, Moving average, Overloading
- Abstract
-
Statistical method of the least squares was used in long term load growth forecast based on retrospective load growth data (2003-2023) for Akure 132kV Injection substation. Growth trend was established and the smoothening of the actual growth dynamics was achieved by applying moving averages. The load growth trend line equations obtained enable the determination of load forecast estimate up to 2023. It was inferred from the results that the load growth forecast estimate for transformers, T1A, T2A, T3A and FUTA line are 19.24MW, 28.02MW, 45.02MW and 1.05MW respectively for a period of ten years.
- References
-
Nwachukwu, V. O. (2005): Introduction to Statistic. 5th Edition. Peace Publishers, Owerri, Nigeria 269pp.
Nwachukwu, V. O. (2006): Principles of Statistical inference. 2nd Edition. Zelon Enterprises, PortHarcourt, Rivers State 356pp
Oroge, C. O. (1991): Fundamentals of Reliability and Testing Methods. 1st Edition. Sooji Press Limited, Kaduna, Nigeria 166pp
Akure Business Unit (2003): Power Holding Company of Nigeria PLC,Akure Billing Register for FUTA
IEE (1981): Regulations for Electrical Installation. 15th Edition. 193pp.
Nagrath, I. J. and Kothari, D. P, (1994): Power System Engineering. Tata McGraw Publishing Company Limited 150pp
Olorunnisola, A. O. (2004): Technical Report Writing and Presentation. 1st Edition. Ibadan, Nigeria 89pp
Power Holding Company of Nigeria PLC, PHCN, (2007): Safety Rules and Standard Protection Codes. 41pp.
Skipper Electricals (2008): Power Transformer Testing gets a new Tool: FRATesting. Way Forward (3): 4-5
- Downloads
- Published
- 2019-01-02
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- I. M. Sanni, H. A. Ahmed, U. A. Abubakar, S. A. Abdullahi, Spatio-Temporal Analysis of Temperature Trend Of Hadeija-Jama’are River of the Chad Basin in Northern Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 1 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- A. R. Iyanda, O. A. Odejobi, Computational Modelling Technique for Short-Term Electric Load Forecasting , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 2 (2015): FUTA Journal of Engineering and Engineering Technology
- J T Fasinmirin, D O Rapheal, J Lazarus, SOIL CHARCTERIZATION AND MAIZE (Zea mays L.) EVAPOTRANSPIRATION (ETc) IN OMU-ARAN HUMID GEOLOGICAL ZONE OF NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- O. Z. Ayodeji, A. A. Adegun, S. A. Anjorin, DEVELOPMENT AND PERFORMANCE EVALUATION OF A SMALL-SCALE GROUNDNUT SHELLING MACHINE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- O OLANIRAN, J O BORODE, A E AFOLABI, P A OLUBAMBI, B A OLANIRAN, D O FOLORUNSO, CORROSION ASSESSMENT OF SINTER DUPLEX STAINLESS STEEL COMPOSITES IN PINEAPPLE JUICE EXTRACT , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- T A EWEMOJE, S D FAGBAYIDE, K O OLUWASEMIRE, LYSIMETER DETERMINATION OF CROP COEFFICIENT OF DRIP IRRIGATED JATROPHA CURCAS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- Oyebola Olabinjo, STORABILITY POTENTIAL OF CARROT (Daucuscarota L.) UNDER STEM SPONGE PADDED EVAPORATIVE COOLING STRUCTURES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- T. O. Awodola, Dynamic Behaviour Under Moving Masses of Prestressed and Elastically Supported Plates Resting on Winkler Foundation , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 1 (2015): FUTA Journal of Engineering and Engineering Technology
- T O Awodola, FLEXURAL MOTION UNDER MOVING MASSES OF PRESTRESSED SIMPLY SUPPORTED PLATE RESTING ON BI-PARAMETRIC FOUNDATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- C. O. Ijagbemi, D. T. Oloruntoba, A. O. Adeoye, Development of a Bioplastic Film for Food Packaging , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 1 (2014): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.