ROBOTIC MANIPULATOR MODEL AND CONTROL ESTIMATION
- Authors
-
-
Owojori, A.O.
Federal University of Technology PMB 704, Akure, Ondo State, Nigeria
-
- Keywords:
- robotic system, MATLAB/Simulink, mathematical model, arm manipulator
- Abstract
-
Mimicking the human arm functions in handling pick and place tasks within precise path or trajectory in a designed space has introduced the concept of arm manipulator robot control estimation. The system design involves an arm manipulator mounted on a fixed-base platform whose dynamics mathematical modelling is carried out on MATLAB/ Simulink software. Deploying the link kinematic model or Denavit-Hartenberg (DH) model followed by the Lagrangian equation to express the joint dynamics, a relatively precise mathematical model is obtained to address issues of geometrical configuration. MATLAB/ Simulink also allows the introduction of control actuators at different joints of the robot (three (3) servo motors in the arm manipulator). The control performance was estimated based on the joint angles of the arm manipulator system with respect to their torque inputs. A stable system response was obtained with settling time of 0.5 sec and Proportional-Integral-Derivative (PID) coefficients (?1: Kp=1.1772,Ki=9.318, Kd=0.03718; ?2: Kp=0.20862,Ki=0.911,Kd=0.0066; ?3: Kp=1.1772,Ki=9.318,Kd=0.0372) for the arm joints.
- Author Biography
- References
-
Craig, J. J. (1989) Introduction to Robotics, Mechanics and Control. 2nd Edition.
Kadis, A., Caldecott, D., Edwards, A., Jerbic, M., Madigan, R., Haynes, M., Cazzolato, B. and Prime, Z. (2010) Modelling, Simulation and Control of an Electric Unicycle. University of Adelaide.
Keuchel, U. and Stephan, R. M. (1994) Microcontroller-Based Adaptive Control Applied to Thyristor-Driven DC-Motors. Springer-Verlag London.
Koh, K. C. and Cho, H. S. (1994) A path tracking control system for autonomous mobile robots: an experimental investigation. Elsevier Science Ltd, Great Britain 4(8), 799-820.
Lomai, F. and Szederkenyi, G. (2008) Trajectory Tracking Control of a 6-Degree of Freedom Robot Arm using Nonlinear Optimization. IEEE Journal. 655-660.
Luckel, J. (1995) From Design Methods to Industrial Applications. Proceedings of the Third Conference on Mechatronics and Robotics. Springer Fachmedien Wiesbaden.
Luo, C., He, Y. and Abubakar, S. (2020) Solving Inverse Kinematics of the Shotcrete Manipulator Based on the Plane Two-link Model and Trajectory Planning. Journal of Robotics, Hindawi, 1-12.
Nwokah, O. D. I. and Hurmuzlu, Y. (2002) The Mechanical Systems Design Handbook: Modeling, Measurement and Control. The Electrical Engineering Handbook Series. CRC Press LLC. 1-819.
Owojori, A.O., Akingbade, K.F., Apena, W.O. and Ogunti, E.O. (2024) Dynamic Model Comparison and Stability Control Design of a Differential Drive Robot. Journal of Engineering and Engineering Technology. 18(1), 41-49.
Snider, J. M. (2009) Automatic Steering Methods for Autonomous Automobile Path Tracking.
Somefun, O. A., Akingbade, K. F. and Dahunsi, F. M. (2020) Speed Control of DC Motors: Optimal Closed PID-Loop Model Predictive Control. Universal Journal of Control and Automation. 8(1), 9-21.
Yin, X. and Pan, L. (2017) Direct adaptive robust tracking control for 6 DOF industrial robot with enhanced accuracy. ISA Transaction, Elsevier. 1-7.
Zhang, W., Zhao, D., Chen, Q. and Du, D. (2010) Linkage underactuated humanoid robotic and with control of grasping force. 2nd International Asia Conference on Informatics in Control, Automation and Robotics.
- Cover Image
-
- Downloads
- Published
- 2026-03-03
- Section
- Articles
- License
-
Copyright (c) 2026 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- O. O. Awopetu, P. K. Farayibi, K. A. Ismail, Optimization of Major Process Parameters for Surface Roughness of ASTM 25 Grey Cast Iron using Taguchi method , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 2 (2017): FUTA Journal of Engineering and Engineering Technology
- Oyebola Olabinjo, STORABILITY POTENTIAL OF CARROT (Daucuscarota L.) UNDER STEM SPONGE PADDED EVAPORATIVE COOLING STRUCTURES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- Adeyanju, Olusiji Ayoade , Adeosun, Tunde Adamson, PRODUCTION ANALYSIS OF FIVE-SPOT MISCIBLE DISPLACEMENT SCHEMES IN GAS CONDENSATE RESERVOIRS. , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- A. O. Adedeji, The University as a Catalyst for Sustainable Development in Nigeria: A Case Study of the Federal University of Technology, Akure , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 2 (2014): FUTA Journal of Engineering and Engineering Technology
- Ayoola Jongbo, Adekunle T. Atta, Ian Moorcroft, EVALUATION OF THE INDOOR AIR VELOCITY OF A SIDEWALL INLET AND ROOF EXHAUST VENTILATED BROILER SHED USING COMPUTATIONAL FLUID DYNAMICS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- I. A. Oke, A. O. Obijole, E. A. Adekunbi, J. O. Babajide, M. D. Idi, T. A. Aladesanmi, THERMAL PROPERTY OF CARBON RESIN ELECTRODES DEVELOPED FOR ELECTROCHEMICAL TREATMENT OF WATER AND WASTEWATERS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 1 (2021): FUTA Journal of Engineering and Engineering Technology
- O. A. Dahunsi, M. O. Adeoti, O. O. Awopetu, F. O. Aramide, O. O. Alabi, A. S. Abdulkareem, Characterization of Saman-Burkono (Nigeria) Graphite for Crucible Production , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- J. T. Fasinmirin, A. J. Adesigbin, Tillage Effects on Some Soil Physical Properties and Yield of Cowpea (Vigna unguiculata) in the Humid Rain Forest of Akure, Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 2 (2015): FUTA Journal of Engineering and Engineering Technology
- A. E. Owoputi, Issues in Safety and Security in Maritime Transportation, Port and Marine Environment , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 2 (2014): FUTA Journal of Engineering and Engineering Technology
- E. C. Umeh, A. F. Isiaka, Analysis of the Short Fall in Production Target and Specific Cost of Unit Operations in National Iron Ore Mining Company NIOMCO, Itakpe. , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 2 (2014): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.