Assessment of Cost Effectiveness of Borehole Drilling in Oyo State, Nigeria
- Authors
-
-
M. M. Melodi
Department of Mining Engineering, The Federal University of Technology Akure, Nigeria
-
O. S. Adekinya
Department of Mining Engineering, The Federal University of Technology Akure, Nigeria
-
- Keywords:
- Array, Array, Array, Array, Array
- Abstract
-
This study assesses the cost-effectiveness of borehole drilling in Nigeria using Oyo State as a case study. Fifteen (15) borehole drilling companies designated A to O were examined in the study area. Data collected using questionnaires covers the cost items estimated in industrial and domestic borehole drilling. Regression analysis was carried out to and the significant cost effectiveness of industrial borehole drilling in the study area. Number of skilled labour, number of unskilled labour, number of drilling rig, number of terrameter, frequency of maintenance, number of casing, drilling equipment, submersible pump, water analysis/treatment, casing type, site accessibility and skills availability among others were discovered insignificant determinants of cost effectiveness of industrial borehole drilling in the study area at 5% level, (p > 0.05). It is also noted that these factors do not have a combined significant effect on the cost effectiveness of industrial borehole drilling (F = 8.138, p = 0.114) and determine 86.0% changes in cost effectiveness of industrial borehole drilling in the study area (Adj. R2 = 86.0%), while these variables determine 94.8% changes in cost effectiveness in domestic borehole drilling (Adj. R2 = 94.8%). The result of the t – test of comparison of mean difference between the mean cost of drilling a domestic and industrial boreholes revealed a significant mean difference between costs of producing a domestic borehole (323,333.33 Naira) and industrial boreholes (530,000 Naira). This difference was found to be significant at 5% level, (t = -11.808, p = 0.000). It is concluded that borehole drilling be cost effective while quality is not compromise thereby giving due value for investment.
- References
- Downloads
- Published
- 2019-05-03
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- Idris, M.A , Kolade, A.S, PROBABILISTIC SLOPE STABILITY ASSESSMENT FOR SUSTAINABLE MINING AT ANKPA COAL MINE, NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- Arowolo, M.O., , Adaralode, C.I. , Ogundigba, H.B, DEVELOPMENT AND IMPLEMENTATION OF A COMPUTER VISION-BASED POTHOLE DETECTOR USING INFRARED CAMERA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 2 (2023): FUTA Journal of Engineering and Engineering Technology
- M. K. Adeyeri, Assessment of Maintenance Activities of Some Sawmills in Ekiti and Osun States of Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 1 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- A. S. Oyerinde, EFFECT OF DRYING RATE AND MOISTURE REMOVAL ON THE DRYING PROPERTIES OF GROUND AND FERMENTED CASSAVA MASH ("GARI") , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 1 (2021): FUTA Journal of Engineering and Engineering Technology
- Adeyemo A. J., AMELIORATION OF DIFFERENT SOIL TYPES CONTAMINATED WITH SPENT HYDROCARBON. , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- S. O. Balogun, S. A. Yaro, M. Abdulwahab, A. Kasim, PRODUCTION AND CHARACTERIZATION OF ALUMINA NANOPARTICLES FROM GIRO CLAY VIA ACID LEACHING WITH SOL GEL METHOD , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 1 (2021): FUTA Journal of Engineering and Engineering Technology
- J. A. Ajayi, C. M. Ikumapayi, O. J. Oyedepo, A. O. Olalemi, EFFECTIVENESS OF AGRO-WASTES MATERIALS IN MINIMIZING ALKALI-SILICA REACTIONS IN CONCRETE PAVEMENT , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 1 (2026): FUTA Journal of Engineering and Engineering Technology
- Omotehinse, A. O., PROSPECTS OF OIL SAND MINING IN NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 1 (2023): FUTA Journal of Engineering and Engineering Technology
- Oluwaseun Opeyemi Martinsa, Muhammad Abdulhamid Mahdia, David Tiwaloluwa Adegokea, Olusola Esther Omoniyia, Pius Benmoore Gabriela, DESIGN AND IMPLEMENTATION OF AN ELECTRONIC ATTENDANCE AND ADMITTANCE SYSTEM WITH FINGERPRINT AUTHENTICATION USING PATTERN MATCHING , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- O. O. Olubanjo, Effects of Wastewaters From an Abattoir on Surface Water Quality in Akure, Ondo State, Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 1 (2017): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.