Assessment of Cost Effectiveness of Borehole Drilling in Oyo State, Nigeria
- Authors
-
-
M. M. Melodi
Department of Mining Engineering, The Federal University of Technology Akure, Nigeria
-
O. S. Adekinya
Department of Mining Engineering, The Federal University of Technology Akure, Nigeria
-
- Keywords:
- Array, Array, Array, Array, Array
- Abstract
-
This study assesses the cost-effectiveness of borehole drilling in Nigeria using Oyo State as a case study. Fifteen (15) borehole drilling companies designated A to O were examined in the study area. Data collected using questionnaires covers the cost items estimated in industrial and domestic borehole drilling. Regression analysis was carried out to and the significant cost effectiveness of industrial borehole drilling in the study area. Number of skilled labour, number of unskilled labour, number of drilling rig, number of terrameter, frequency of maintenance, number of casing, drilling equipment, submersible pump, water analysis/treatment, casing type, site accessibility and skills availability among others were discovered insignificant determinants of cost effectiveness of industrial borehole drilling in the study area at 5% level, (p > 0.05). It is also noted that these factors do not have a combined significant effect on the cost effectiveness of industrial borehole drilling (F = 8.138, p = 0.114) and determine 86.0% changes in cost effectiveness of industrial borehole drilling in the study area (Adj. R2 = 86.0%), while these variables determine 94.8% changes in cost effectiveness in domestic borehole drilling (Adj. R2 = 94.8%). The result of the t – test of comparison of mean difference between the mean cost of drilling a domestic and industrial boreholes revealed a significant mean difference between costs of producing a domestic borehole (323,333.33 Naira) and industrial boreholes (530,000 Naira). This difference was found to be significant at 5% level, (t = -11.808, p = 0.000). It is concluded that borehole drilling be cost effective while quality is not compromise thereby giving due value for investment.
- References
- Downloads
- Published
- 2019-05-03
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- O. Olayemi Simo-Oke, Alaba Ogunbameru, J. Imisi, Bridging Public Infrastructure-Finance Gap in Ondo State, Nigeria: Does Pension Fund Matter? , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 10 No. 2 (2016): FUTA Journal of Engineering and Engineering Technology
- G. A. Fadehan, K. B. Adedeji, K. F. Akingbae, EFFECT OF FREQUENCY NOTCHING TECHNIQUE ON ULTRA-WIDEBAND ANTENNA PERFORMANCE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 1 (2026): FUTA Journal of Engineering and Engineering Technology
- Folasade Dahunsi, Oluwasina Aderinwale, Abayomi Adesida, Abiola Alayande, J. Ojo, Oluwaseyi Falola, Oluwarotimi Dahunsi, DEVELOPMENT OF A SPACE TECHNOLOGY CAPACITY BUILDING INITIATIVE AT THE FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 1 (2021): FUTA Journal of Engineering and Engineering Technology
- Oluseyi Orisadare, Ayodeji S. Olawore, Michael O. Ibiwoye, Eyitayo A. Ponle, Omolola T. Odeyemi, Opeyemi S. Kegbeyale, MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF BRASS REINFORCED WITH COCONUT SHELL ASH POWDER , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- Engr. Ayoade M. Ajani, Prof. Olugbenga J. Oyedepo, Prof. (Mrs.) Bamitale D. Oluyemi-Ayibiowuwu, Dr. Oladunni. O. Alabi, Engr. Oladapo J. Omomomi, PERFORMANCE AND LIFE-CYCLE COST ANALYSIS OF HYBRID WASTE-MODIFIED ASPHALT CONCRETE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 2 (2026): FUTA Journal of Engineering and Engineering Technology
- A. J. Abegunde, B. V. Omidiji, P. O. Ajewole, Characterization of Ado-Ekiti River Sand for foundry applications , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 2 (2017): FUTA Journal of Engineering and Engineering Technology
- Abdalla Esmaeel, Sesan Peter Ayodeji, Diana Starovoytova, Jerry Ochola, ERGONOMIC RISK SIMULATION USING RAPID UPPER LIMB ASSESSMENT TOOL FOR THE SITTING POSTURE OF GARMENTS WORKERS: A CASE OF RIVATEX EAST AFRICA LIMITED, ELDORET, KENYA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- SAMUEL AKINGBONMIRE, Fault Tree–Based Reliability Analysis of Reinforced Concrete Elements in an Institutional Building , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 2 (2026): FUTA Journal of Engineering and Engineering Technology
- B. Adebayo, Evaluation of the Performance of Atlas Copco SDR4 Rotary Drill In Sagamu Limestone Formation, Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- T. O. Awodola, Dynamic Behaviour Under Moving Masses of Prestressed and Elastically Supported Plates Resting on Winkler Foundation , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 1 (2015): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.