Equipment Maintenance Management Audit of Some Granite Aggregate Quarries in Part of South - West Nigeria
- Authors
-
-
S. O. Abdulraman
Earth Values Ventures Limited, Taoheed Road, Off Basic ROAD, Ilorin, Nigeria
-
B. M. Olaleye
Department of Mining Engineering, The Federal University of Technology, Akure, Nigeria
-
M. A. Saliu
Department of Mining Engineering, The Federal University of Technology, Akure, Nigeria
-
- Keywords:
- Array, Array, Array, Array
- Abstract
-
This paper analyses an existing maintenance management system in some selected typical granite aggregate quarries (represented as K1, K2 and K3) in part of South- west Nigeria using modied questionnaire and interview. The quarries' current maintenance management effectiveness was evaluated with respect to five basic elements of
maintenance management. The quarries were rated in accordance with global best practices with credits / points ranging from 1 to 3. Investigation shows that K1 and K2 had average overall ratings of 1.45 and 1.39 respectively. These scores fell below average performance, which informed their inability to operate at profit and call for urgent improvement decisions in all elements of maintenance management benchmarked. K3 scored 2.48, which indicates that the quarry adopts an effective maintenance management system, but will also need to improve on its preventive maintenance and maintenance scheduling. This paper is therefore an assessment initiative for maintenance and productivity continuous improvement and can be integrated as a part of a decision support system for maintenance management in the quarry industry. - References
- Downloads
- Published
- 2019-05-03
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- A. R. Iyanda, O. A. Odejobi, Computational Modelling Technique for Short-Term Electric Load Forecasting , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 2 (2015): FUTA Journal of Engineering and Engineering Technology
- Dahunsi, F. M., , Olawumi, A. O, Sarumi, O. A, Ponnle, A. A, A REVIEW ON ELECTRICAL ENERGY DATASET: MEASUREMENT, FEATURES, AND APPLICATIONS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 1 (2023): FUTA Journal of Engineering and Engineering Technology
- T. S. Mogaji, Development of an Improved Vapour Compression Refrigeration System for Preservation of fresh Vegetables , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- Giwa A.M., Olatunji O. K. , Mohammed Dikko Almustapha, Muhammad.Z.Z, Agbon E.E, Yau.I, Sena Timothy Tersoo, SIGNAL MONITORING AND ANALYSIS FOR ENHANCED TRUSTWORTHINESS IN 5G TELECOMMUNICATIONS NETWORKS: AN OVERVIEW OF THE CHALLENGES FACED AND SOLUTIONS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- O.A Olubosede, , K. B Adedeji, , C. S Odeyemi,, T. H Shabangu, , DESIGN AND IMPLEMENTATION OF A PID CONTROL FOR A DC MOTOR-DRIVEN BELT CONVEYOR SYSTEM , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 2 (2025): FUTA Journal of Engineering and Engineering Technology
- W. Lawal, A. A. Akinlabi, O. A. Agbolde, O. Ogunlade, I. A. Olajide, A. O. Adedokun, C. S. Odeyemi, A. O. Owojori, S. O. Akinwande, T. A. B. Akomolafe, T. F. Ogunlade, U. C. Nnamdi, S. O. Oladiran, O. F. Awe, B. T. Ayeni, K. B. Adedeji, I. A. Makinde, U. Lawal, O. C. Adesoba, AN ENSEMBLE-BASED FRAMEWORK FOR DETECTING FAKE NEWS AND MITIGATING DIGITAL MISINFORMATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- A D Dada, BRIDGING RESEARCH-INDUSTRY DIVIDE IN FOOD AND BEVERAGE ENTERPRISES: EMPIRICAL EVIDENCE FROM SOUTHWESTERN NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- Emem Ayankop Andi , Ja’afaru Yahaya Bawa, Emem A. A, ’afaru Y. B, EFFECT OF DRILLING PARAMETERS ON DRILLING PERFORMANCE FACTORS IN HORIZONTAL WELLS USING SIMULATION APPROACH. , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- O. A. George, T. Osibemekun, O. J. Sopeyin, MACHINE LEARNING–ENABLED RIDE-SHARING OPTIMIZATION: A CASE STUDY OF THE SLYFT APPLICATION AT UNILAG , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 1 (2026): FUTA Journal of Engineering and Engineering Technology
- O. O. Olubanjo, Assessment of Groundwater Quality For Human Consumption And Agricultural Use In Ilara-Mokin, Ondo State, Nigeria. , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 10 No. 2 (2016): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.