Equipment Maintenance Management Audit of Some Granite Aggregate Quarries in Part of South - West Nigeria
- Authors
-
-
S. O. Abdulraman
Earth Values Ventures Limited, Taoheed Road, Off Basic ROAD, Ilorin, Nigeria
-
B. M. Olaleye
Department of Mining Engineering, The Federal University of Technology, Akure, Nigeria
-
M. A. Saliu
Department of Mining Engineering, The Federal University of Technology, Akure, Nigeria
-
- Keywords:
- Array, Array, Array, Array
- Abstract
-
This paper analyses an existing maintenance management system in some selected typical granite aggregate quarries (represented as K1, K2 and K3) in part of South- west Nigeria using modied questionnaire and interview. The quarries' current maintenance management effectiveness was evaluated with respect to five basic elements of
maintenance management. The quarries were rated in accordance with global best practices with credits / points ranging from 1 to 3. Investigation shows that K1 and K2 had average overall ratings of 1.45 and 1.39 respectively. These scores fell below average performance, which informed their inability to operate at profit and call for urgent improvement decisions in all elements of maintenance management benchmarked. K3 scored 2.48, which indicates that the quarry adopts an effective maintenance management system, but will also need to improve on its preventive maintenance and maintenance scheduling. This paper is therefore an assessment initiative for maintenance and productivity continuous improvement and can be integrated as a part of a decision support system for maintenance management in the quarry industry. - References
- Downloads
- Published
- 2019-05-03
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- Apena, W. O, Odeyemi, C. S, A REVIEW OF BIOMETRIC FACIAL RECOGNITION ELECTRONIC VOTING SYSTEM: NIGERIA POLLS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- Anthony T. Bolarinwa, Gideon C. Nwafor, OPEN PIT OPTIMIZATION AND PRODUCTION SCHEDULING OF OKOBO COAL MINE, CENTRAL NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- OLAJIGA, Samuel Olaniyi, Amu, Olugbenga Oludolapo , EFFECTS OF RICE HUSK ASH ON THE OPTIMUM LIME -STABILIZED LATERITIC SOILS USED FOR ROAD CONSTRUCTION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 2 (2025): FUTA Journal of Engineering and Engineering Technology
- C. O. Akinbile, F. O. Ajibade, O. Ofuafo, Soil Quality Analysis for Dumpsite Environment in a University Community in Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 10 No. 2 (2016): FUTA Journal of Engineering and Engineering Technology
- J. O. Amigun, Seismic Inverted Acoustic Impedance for Lithofacies Discrimination and Reservoir Fluids Prediction: A Case of ‘Ovi’ Field, Niger Delta , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- Owojori, A.O., ROBOTIC MANIPULATOR MODEL AND CONTROL ESTIMATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 2 (2025): FUTA Journal of Engineering and Engineering Technology
- A. A. Akinlabi, A. P. Faluyi, J. M. Iberedem, F. M. Dahunsi, INTERNLY: A MOBILE PLATFORM FOR CONNECTING NIGERIAN STUDENTS TO INTERNSHIP OPPORTUNITIES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- A. S. Taiwo, I. O. Oladele, O. O. Daramola, A. D. Akinwekomi, O. G. Agbabiaka, Mechanical Wear Resistance and Water Absorption Properties of Particulate Palm Kernel Shell Reinforced Epoxy Composites for Automobile Application , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- W. O. Apena, G. A. Oladunni, Comparative Analysis of Path Loss Prediction Models for Selected Rural Areas in Ondo State, Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- Yusuf Ojo Adeiza, Belo Abdullahi, Henry Ohiani Ohize , Momoh Iliyasu Onimisi , DEVELOPMENT OF BIOSORBENT MATERIALS FOR THE REMOVAL OF TOXIC ELEMENTS SOLUBLE PETROLEUM FRACTIONS FROM OIL SPILLEDCONTAMINATED WATER BODY , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.