Modelling of Electric Power Subsystem for a Weather Balloon Microsatellite
- Authors
-
-
W. O. Apena
Department of Electrical and Electronic Engineering, The Federal University of Technology, Nigeria
-
K. F. Akingbade
Department of Electrical and Electronic Engineering, The Federal University of Technology, Nigeria.
-
- Keywords:
- Array, Array, Array, Array, Array
- Abstract
-
This paper examines monocrystalline PV cell Electric Power Subsystem (EPS) for a Weather Balloon microsatellite. The study deplored initial knowledge on power system and energy conversion to simulate electric power subsystem model in MATLAB Simulink 2013b environment through mathematical equations. The research investigated atmospheric conditions with respect to P-V and I-V characteristics on photovoltaic cells initiatives. The study adopted characteristic effect of solar energy radiation from 1367W/m2 to 767W/m2 with respect to low orbit temperature. The study has shown that photovoltaic devices could be considered for generation of electric power energy for spacecraft and microsatellite stations due to its efficiency and ability for thermal cycles in lower orbit with respect to limited time varying degradation.
- References
- Downloads
- Published
- 2019-05-04
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- Daso Akindele Wellington, Adewuyi Gideon Akinyemi, Oke Peter Kayode , DEVELOPMENT OF SOLAR CELLS USING ADAPTABLE LOCALLY SOURCED MATERIALS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- A. A. Ponnle, S. K. Ani, Assessment of Exposure to Indoor Power Frequency Magnetic Fields: SEET Building and Engineering Laboratories, FUTA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- Iniko E. Bassey, Prof. Josiah O. Babatola, Prof. O. M. Ojo, Ebenezer O. Onagbola, EVALUATING THE EFFICIENCY OF TERMITE-MEDIATED DEGRADATION OF SUGARCANE BAGASSE, MAIZE COBS, AND COCONUT HUSKS FOR BIOGAS PRODUCTION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 2 (2026): FUTA Journal of Engineering and Engineering Technology
- Akinola, A. O, Abdulkadir, M, Bello, E. I, Adedeji, S. Y., PRODUCTION AND CHARACTERIZATION OF BIODIESEL FROM MARULA (Sclerocarya birrea) SEED OIL , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 16 No. 2 (2022): FUTA Journal of Engineering and Engineering Technology
- O. O. Olubanjo, Assessment of Groundwater Quality For Human Consumption And Agricultural Use In Ilara-Mokin, Ondo State, Nigeria. , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 10 No. 2 (2016): FUTA Journal of Engineering and Engineering Technology
- A. S. Oyerinde, EFFECT OF DRYING RATE AND MOISTURE REMOVAL ON THE DRYING PROPERTIES OF GROUND AND FERMENTED CASSAVA MASH ("GARI") , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 1 (2021): FUTA Journal of Engineering and Engineering Technology
- O. O. Omotayo, P. M. Omowaye, C. M. Ikumapayi, C. Arum, INFLUENCE OF BURNING TEMPERATURE ON RICE HUSK ASH MICROSTRUCTURE AND POZZOLANIC REACTIVITY , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- O OLANIRAN, J O BORODE, A E AFOLABI, P A OLUBAMBI, B A OLANIRAN, D O FOLORUNSO, CORROSION ASSESSMENT OF SINTER DUPLEX STAINLESS STEEL COMPOSITES IN PINEAPPLE JUICE EXTRACT , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- Uwadia, O.A., Dahunsi, F.M., SOIL NUTRIENT PREDICTION AND CROP PREDICTION RECOMMENDATION SYSTEMS USING IOT AND AI TECHNIQUES: CURRENT TRENDS AND CHALLENGES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- Adeyi, T. A, Sadiq, T. O, Olawore, A. S, Diji, C. J, INVESTIGATION OF OPTIMAL DRYING MEDIA FOR SELECTED AGRICULTURAL PRODUCE IN NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 16 No. 2 (2022): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.