Conceptual Design of Battery Powered Vehicle for Children Amusement Park Using Nigerian Anthropometric Parameters
- Authors
-
-
S. P. Ayodeji
Department of Industrial and Production Engineering, The Federal University of Technology, Akure, Nigeria
-
M. K. Adeyeri
Department of Industrial and Production Engineering, The Federal University of Technology, Akure, Nigeria
-
O. O. Oni
Department of Industrial and Production Engineering, The Federal University of Technology, Akure, Nigeria
-
- Keywords:
- Array, Array, Array, Array, Array
- Abstract
-
Exercise helps children to be active and lack of it can lead to boredom. The problem of unavailability of facilities designed for children amusement park using the right anthropometric parameters and the procurement cost due to importation duties have been a big challenge. Provision of children vehicle for amusement park using anthropometric parameters will go a long way to solve the problems associated with boredom. Anthropometric parameters from 2 5 0 (150 male and I 00 female) children between ages 3 to I 2 were collected and analysed. The 5th, 25th, 50th, 75th and 95th percentiles for female and male respectively were used in the design of the children vehicle. Detailed drawings and simulation of the design concept were produced on Autodesk Inventor CAD software. Three deep cycle battery of 200Ah x 12V each was proposed as the energy driver that will drive the vehicle for 1 hr at a carrying load capacity of 2280N. The simulation result ensure the stability of the vehicle.
- References
- Downloads
- Published
- 2019-05-05
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- S. O. Obayopo, F. J. Banjoko, S. A. Balogun, H. B. Adedayo, Investigation into the Use of Blended Sunflower Oil and Superolein in Hydraulic Systems , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 1 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- O.A Olubosede, , K. B Adedeji, , C. S Odeyemi,, T. H Shabangu, , DESIGN AND IMPLEMENTATION OF A PID CONTROL FOR A DC MOTOR-DRIVEN BELT CONVEYOR SYSTEM , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 2 (2025): FUTA Journal of Engineering and Engineering Technology
- Agbolade, O. A, Ogunyemi, B. I., DEVELOPMENT OF A LIBRARY MANAGEMENT SYSTEM ON A RASPBERRY PI BASED WIRELESS LOCAL AREA NETWORK , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- O. A. Agbolade, EVALUATING LORAWAN ADAPTIVE DATA RATE EFFECTIVENESS IN HETEROGENOUS SMART FARMING CONDITIONS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- P B Mogaji, DEVELOPMENT OF AN IMPROVED CIRCULAR SAWING MACHINE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 2 (2018): FUTA Journal of Engineering and Engineering Technology
- John Macaulay, Brendan Ubochi, IMPLEMENTION OF A DSPACE CONTROL SYSTEM FOR A NON-ISOLATED DC-DC BOOST CONVERTER , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 1 (2021): FUTA Journal of Engineering and Engineering Technology
- IDOWU Abimbola Samson , ADEWUYI B.O, FOLORUNSO D.O, AKINWEKOMI A. D., OPTIMUM INFLUENCE OF CHROMIUM AND COMBINE AUSTEMPERING-CRYOGENIC TREATMENTS ON PERFORMANCE OF DUCTILE IRON , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- Babatunde Oluwamayokun Soyoye, Tehinse, T. O., Design and Fabrication of a Maize Shelling Machine , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 2 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- Oyefeso, B, Yusuff, O. A., Fadele, O. K, DEVELOPMENT OF PREDICTIVE MASS AND VOLUME MODELS FOR AFRICAN BUSH MANGO (Irvingia gabonensis) , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- Ogundele, O. J, Adebisi, O. I, Adejumobi, I. A, Amusa, K. A. , Alabi, A. A, POWER QUALITY ENHANCEMENT IN AN ELECTRICAL DISTRIBUTION NETWORK USING SHUNT PASSIVE FILTER , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.