Effects of concrete mixing fluid samples - fermented locust beans and sewage on the strength properties of self-healing concrete
- Authors
-
-
A. S. Ogbiye
Department of Civil Engineering, Covenant University, Ota, Ogun state, Nigeria
-
Lucia O. Agashua
Department of Civil Engineering, Covenant University, Ota, Ogun state, Nigeria
-
- Keywords:
- Array, Array, Array, Array
- Abstract
-
This study investigated the effects of using different mixing fluid samples, potable water, fermented locust beans and sewage, on the strength properties of a self-healing concrete. The physicochemical characteristics of the mixing fluid samples were determined before investigating their effects on the strength development of the resulting concrete samples. The strength parameters investigated comprised of the compressive strength, split tensile strength and flexural strength. It was found that for each of the concrete samples cured for 3, 7, 14, 21 and 28 days, the samples produced with fermented locust beans had the highest compressive, split tensile and flexural strength values, followed by those produced with sewage, while the concrete made with potable water had the least strengths for the Grade 20 concrete samples produced. The activities of the bacteria in the mixing water samples containing fermented locus beans and sewage, aside having the potential to seal cracks that develop within the concrete, also increased the strength properties of the resulting concrete.
- References
- Downloads
- Published
- 2019-05-14
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- E. O. Aiyewalehinmi, O. S. Aderinola, Strength Properties of Commercially Produced Sandcrete block in Ikeja: Lagos State , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 1 (2015): FUTA Journal of Engineering and Engineering Technology
- Aderinola, O.S, Ata, G.O, ENHANCING ASPHALT PAVEMENT PERFORMANCE THROUGH PALM KERNEL SHELLS (PKS) INTEGRATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- Agbeboh, N. I, Oladele, I. O, Daramola, O. O, Akinwekomi, A. D, Tanimola, M. O, Olasukanmi, O. G., COMPARING THE EFFECTS OF TWO WET PRECIPITATION METHODS ON THE YIELD OF CHICKEN EGGSHELL-DERIVED HYDROXYAPATITE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 16 No. 1 (2022): FUTA Journal of Engineering and Engineering Technology
- A. D. Akinwekomi, I. O. Oladele, A. Oyetunji, Microwave Sintering and Characterisation of Magnesium Alloy AZ61/Carbon Nanotube Composites , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- Obiora-Okeke, O. A, Owolabi, S. H , Adewumi, J. R, HYDRAULIC ASSESSMENT FOR SIGHTING A CONCRETE WEIR ON OGBESE RIVER FOR IRRIGATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- O.A. ADEMESO, B.I. ADEYEMO, Physical and Mechanical Characteristics of the Conglomeratic Layer in Akure, Southwestern Nigeria. , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 2 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- J. T. Fasinmirin, Hydraulic and Compaction Characteristics of Soils in Grazed Land of Akure, Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 1 (2015): FUTA Journal of Engineering and Engineering Technology
- Oladele, Samouel O., COMPARATIVE PROXIMATE COMPOSITION AND TOTAL PHENOLIC CONTENTS OF FOUR Musa CULTIVARS AT UNRIPE AND RIPE STAGES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- 1Obiora-Okeke, O. A, Owolabi, S. H , Adewumi, J. R, HYDRAULIC ASSESSMENT FOR SIGHTING A CONCRETE WEIR ON OGBESE RIVER FOR IRRIGATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- F I OTU, E I BELLO, T I OGEDENGBE, L LAJIDE, FOURIER TRANSFORM INFRARED SPECTROSCOPIC ANALYSIS OF RUBBER SEED OIL AND ITS BIODIESEL , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.