An Assessment of the Barriers of Timely Payment in Public Building Projects in Ekiti State, Nigeria
- Authors
-
-
Samuel Olusola Olatunji
Department of Quantity Surveying, Federal University of Technology P.M.B 704, Akure, Ondo State, Nigeria
-
- Keywords:
- Array, Array, Array, Array, Array
- Abstract
-
Contractors are entitled to timely payment for work executed in line with the mode of payment stated in the contract document. This contributes to continuous involvement of contractor in construction businesses and proper cash flow; in order words it prevents contractors’ insolvency. There are anecdotal evidences about the fact that untimely payment of construction works is like a cankerworm that have eaten deep into the fabric of the construction industry in developed and developing countries. This study therefore assessed the barriers of timely payment in public building projects in Nigeria using a survey of selected construction participants that have been involved in the delivery of public projects within the last sixteen years. A total of 23 barriers were assessed and factor analysis was used to analyse the data gathered. The study concludes that the major barriers of timely payment of public building projects within the study area can be categorised under the project management barriers, client barriers, consultant barriers, economy barriers, project environment barriers and contractor barriers. The study further recommends that clients’ should stick to the agreed pace of payment for valued work done by contractors; and also make clients to pay interest for lateness in honouring payment certificate. Effective planning must be carried out from the onset of the project, while having the right mix of construction team is also necessary. It is believed that the findings of this study will go a long way in helping those responsible for the delivery of public building projects to deliver successful project through timely payment to contractors.
- References
- Downloads
- Published
- 2019-05-14
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- Oluseyi Orisadare, Ayodeji S. Olawore, Michael O. Ibiwoye, Eyitayo A. Ponle, Omolola T. Odeyemi, Opeyemi S. Kegbeyale, MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF BRASS REINFORCED WITH COCONUT SHELL ASH POWDER , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- Ajibade Fidelis Odedishemi , SPATIAL ANALYSIS OF URBANIZATION IMPACTS ON WATER RESOURCES USING GEOGRAPHIC INFORMATION SYSTEM IN KANO CITY , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- Olaniran Oladayo, DRUG DELIVERY AND DEGRADATION OF BIOFILM – A REVIEW , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- Faluyi, S. O.,, Amu, O. O., Adetoro, E. A., GEOTECHNICAL PROPERTIES OF LIME AND BAMBOO STEM ASH STABILIZED SOILS FOR ROAD CONSTRUCTION IN SOUTH-WESTERN NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 16 No. 1 (2022): FUTA Journal of Engineering and Engineering Technology
- Y. O. Olasoji, Characterization of Noise in Narrowband Power Line Communications , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 1 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- Emmanuel Igonor, Matthew Oyedokun, Olisa Gbenga, SUSTAINABLE MANAGEMENT OF SOLID MINERAL EXTRACTION IN OKE-OGUN, SOUTHWESTERN NIGERIA: ENVIRONMENTAL, LIVELIHOOD, AND GOVERNANCE PERSPECTIVES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 1 (2026): FUTA Journal of Engineering and Engineering Technology
- Ogbozige, F.J., APPLICATION OF GIS TECHNIQUES IN GENERATING RAINFALL-IDF MAPS FOR UNGAUGED CATCHMENT: A CASE OF YENAGOA CITY, NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 2 (2023): FUTA Journal of Engineering and Engineering Technology
- B. K. Adeoye, A. I. Alao, A. D. Adeleke, U. Nwitte-Eze, ASSESSMENT AND PERFORMANCE EVALUATION OF STARCH MODIFIED EDIBLE COATING AND FILM ON TOMATO PRESERVATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- T O Awodola, FLEXURAL MOTION UNDER MOVING MASSES OF PRESTRESSED SIMPLY SUPPORTED PLATE RESTING ON BI-PARAMETRIC FOUNDATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- D. J. Afu, E. O. Ifelola, S. G. Ayodele, A. Ekun, A. Itunu, Survey of the Effects of Operational Noise on Quarry Workers in Akoko-Edo Local Government Area of Edo State , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 2 (2017): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.