Geochemical and Mineralogical Characterization of Ore – Mineral Assemblages from Black Sands in Akure South Area, South - Western Nigeria
- Authors
-
-
O. O. Alabi
School of Engineering and Engineering Technology, Federal University of Technology, Akure
-
T. A. Olatunji
School of Engineering and Engineering Technology, Federal University of Technology, Akure
-
Y. Gbadamosi
School of Engineering and Engineering Technology, Federal University of Technology, Akure
-
- Keywords:
- Array, Array, Array, Array, Array
- Abstract
-
The geochemical and mineralogical features of Black sand in Akure South was investigated. The head samples were sourced from four different locations and mixed properly for homogenization. 200 g crude sample was sampled out, finely ground using the Denver Ball Mill, Model: Denver D10 and prepared towards characterization. Chemical Characterization of the crude sample was carried out using Energy Dispersive X-ray Fluorescence Spectrometry (ED-XRF) - Minipal 5. Mineralogical Analysis was carried out using Scanning Electron Microscopy with Energy Dispersive X-Ray Spectrometer (SEM-EDS) and X-ray Diffraction Analysis (XRD). ED-XRF analysis revealed that the crude sample contains 17.55 % Fe2O3, 63.7 % SiO2, 15.5 % TiO2, and other compounds in trace form. Mineralogical analysis of the black sand via XRD revealed the present of Quartz (87.07 % SiO2), Magnetite (0.59 % Fe3O4), Ilmenite (9.89 % FeTiO3) with other associated minerals such as Rutile (0.53 % TiO2), Anatase (0.25 % TiO2), Kaolinite (0.09% Al2 (Si2O5(OH)4) and Albite (1.57% Na(AlSi3O8)). SEM images revealed interlocking of some minerals within the crystal aggregates of the crude black sand and the EDS of these microstructures revealed the presence of Al, Mn, Cu, O, Si, C, Fe and Ti; silicon, titanium and iron are the major elemental constituents of the matrix.
- References
- Downloads
- Published
- 2019-05-14
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- Agbeboh, N. I, Oladele, I. O, Daramola, O. O, Akinwekomi, A. D, Tanimola, M. O, Olasukanmi, O. G., COMPARING THE EFFECTS OF TWO WET PRECIPITATION METHODS ON THE YIELD OF CHICKEN EGGSHELL-DERIVED HYDROXYAPATITE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 16 No. 1 (2022): FUTA Journal of Engineering and Engineering Technology
- I. O. Adejumobi, REVIEW OF CONVOLUTIONAL NEURAL NETWORK MODEL FOR OBJECT DETECTION, LOCALIZATION AND CLASSIFICATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- Giwa A.M., Olatunji O. K. , Mohammed Dikko Almustapha, Muhammad.Z.Z, Agbon E.E, Yau.I, Sena Timothy Tersoo, SIGNAL MONITORING AND ANALYSIS FOR ENHANCED TRUSTWORTHINESS IN 5G TELECOMMUNICATIONS NETWORKS: AN OVERVIEW OF THE CHALLENGES FACED AND SOLUTIONS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- Olaniyi Alake , COMPRESSIVE STRENGTH OF TERMITE MOUND AND LIME BLENDED CEMENT MORTAR SUBJECTED TO ACIDIC ENVIRONMENT , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 16 No. 1 (2022): FUTA Journal of Engineering and Engineering Technology
- Ijagbemi, C.O, Olabanji, O. M, Ashiru, A.R, Abdulmumuni, B, IJagbemi F.M, DEVELOPMENT OF ETHANOL GEL COOK STOVE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- Arum, C, Akande, S. P, Alabi, S. A., STRENGTH EVALUATION OF POZZOLANIC CONCRETE CONTAINING CALCINED CERAMIC WASTE AND GLASS WASTE POWDER , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 16 No. 1 (2022): FUTA Journal of Engineering and Engineering Technology
- A. D. Akinwekomi, I. O. Oladele, A. Oyetunji, Microwave Sintering and Characterisation of Magnesium Alloy AZ61/Carbon Nanotube Composites , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- Uwadia, O.A., Dahunsi, F.M., SOIL NUTRIENT PREDICTION AND CROP PREDICTION RECOMMENDATION SYSTEMS USING IOT AND AI TECHNIQUES: CURRENT TRENDS AND CHALLENGES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- Oluwafemi Omotayo, Predictive Modelling and Explainability of Metakaolin Concrete Compressive Strength: Benchmarking TabPFN Against Boosted Ensemble and Kernel-Based Algorithms , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 2 (2026): FUTA Journal of Engineering and Engineering Technology
- C. N. Udekwe, A. O. Dahunsi, A. A. Ponnle, F. M. Dahunsi, K. B. Adedeji, ASSESSMENT OF ELECTROMAGNETIC WAVES EMISSION IN SELECTED BUILDINGS AT THE FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE: IMPLICATIONS FOR OCCUPATIONAL HEALTH AND RADIO FREQUENCY EXPOSURE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
You may also start an advanced similarity search for this article.