A NUMERICAL FORMULA AND COST BENEFIT OF GROUNDWATER RECHARGE IN MAIDUGURI, NIGERIA
- Authors
-
-
M. D. IDI
Land, Air and Water Consulting, F6 Ibrahim Taiwo Estate, Baga Road, Maiduguri, Borno State, Nigeria
-
T. A. ALADESANMI
Information Technology and Communications Unit, Obafemi Awolowo University, Ile- Ife, Nigeria
-
S. LUKMAN
Civil Engineering Department, University of Hafr Al-Batin, Hafr Al-Batin, Saudi Arabia
-
M. A. ASANI
4 Department of Urban and Regional Planning, Ladoke Akintola University Technology, Ogbomoso, Nigeria
-
Y. M. USMAN
Department of Agricultural Engineering, Ramat Polyechnic Maiduguri
-
I. A. OKE
Department of Civil and Environmental Engineering, Elizade University, Ilara- Mokin, Nigeria
-
- Keywords:
- Array, Array, Array, Array, Array
- Abstract
-
In this paper, relationship between rainfall and groundwater recharge (GR) was established and evaluated with cost benefit. Rainfall measured in Maiduguri, Nigeria was used to fix the unknown constants of the numerical formula (NF) using Microsoft Excel Solver. The constants were used to establish NF. The NF was used to estimate GR from the rainfall. Accuracy of the NF was evaluated statistically (relative error; the degree of accuracy, numerical reliability, Model of Selection Criterion (MSC) and Akaike Information Criterion (AIC)) and compared with the formulae in use using field GR Uttar Pradesh (UP) method as the reference GR. A basic cost benefit of GR was conducted.
The study revealed that GR using the current models were similar to GR using UP, Chaturvedi, Kumar and Seethapathi and Rao, but different in magnitude of GR. NF provided the lowest relative error of 0.146 %, the highest MSC of 13.436; the degree of accuracy of 99. 854 % and the lowest AIC of 43.348 with Rao formula having highest relative error of 56.56 %, the lowest MSC of 0.96; the degree of accuracy of 43.44 % and the lowest AIC of 1403.43. The present average cost benefit of groundwater recharge in Maiduguri was found to be 619.60US $ m-2Yr-1. It was concluded that GR using the numerical formula is a promising tool for GR with minimum error in water resources management.
- References
- Downloads
- Published
- 2020-11-18
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- I. A. Oke, A. O. Obijole, E. A. Adekunbi, J. O. Babajide, M. D. Idi, T. A. Aladesanmi, THERMAL PROPERTY OF CARBON RESIN ELECTRODES DEVELOPED FOR ELECTROCHEMICAL TREATMENT OF WATER AND WASTEWATERS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 1 (2021): FUTA Journal of Engineering and Engineering Technology
- F. M. Dahunsi, S. O. Oluponna, Analysis of Energy Usage Pattern of a Nigerian University Digital Resource Center (DRC):: FUTA DRC as a Case Study , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- O. O. Olubanjo, A. E. Alade, Development of a Low Cost Greenhouse and Drip Hydroponic Structure for Vegetable Production in South-West Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 1 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- S.A. ALABI, IMPACT HAMMER TEST FOR BAYESIAN PARAMETER IDENTIFICATION OF RAILWAY TRACK SYSTEM , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 2 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- Adeyanju, Olusiji Ayoade , Adeosun, Tunde Adamson, PRODUCTION ANALYSIS OF FIVE-SPOT MISCIBLE DISPLACEMENT SCHEMES IN GAS CONDENSATE RESERVOIRS. , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- I. O. Adejumobi, REVIEW OF CONVOLUTIONAL NEURAL NETWORK MODEL FOR OBJECT DETECTION, LOCALIZATION AND CLASSIFICATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- A. O. Melodi, B. O. Akinloye, Transmission Capacity Enhancement for Nigerian Power Transmission Grid using TCSC and UPFC , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 2 (2014): FUTA Journal of Engineering and Engineering Technology
- I. O. Oladele, O. G. Agbabiaka, A. S. Ogunbadejo, M. A. Okoro, Assessment of Mechanical Properties of Hybrid Composites Based on Polypropylene and Vegetable Fibers , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 2 (2015): FUTA Journal of Engineering and Engineering Technology
- Tooki, O. O., , Abolade, R. O, Aborisade, D. O., MAPPING OF PLESIOCHRONOUS DIGITAL HIERARCHY SIGNALS INTO SYNCHRONOUS TRANSPORT MODULE FRAME FOR SYNCHRONOUS DIGITAL HIERARCHY SYSTEM , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 1 (2023): FUTA Journal of Engineering and Engineering Technology
- N G Olaiya, P K Farayibi, P K Oke, A REVIEW ON ADDITIVE MANUFACTURING: LASER TECHNOLOGY METHODS, DISTINCTIONS AND APPLICATIONS IN MANUFACTURING ENGINEERING , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 2 (2018): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.