EFFECT OF FLOAT-WEIGHTS ON DISCHARGE MEASUREMENT
- Authors
-
-
Abayomi Olayiwola Eruola
Federal University of Agriculture, Abeokuta
-
Akeem Makinde
Federal University of Agriculture, Abeokuta
-
Gbenga Adegboyega Eruola
Federal University of Agriculture, Abeokuta
-
Kolawole Ayoola
Federal University of Agriculture, Abeokuta
-
Lugard Nwamini
Federal University of Agriculture, Abeokuta
-
- Keywords:
- Array, Array, Array, Array
- Abstract
-
The use of float method of discharge measurement information in rivers is vital for hydrological analysis, though there is no specific information on the choice of float material to be used for the measurement. A comparison of four float materials having different weight for estimation of stream discharge was carried out on Apakula stream in Ogun State, Southwestern Nigeria. Depth and width measurements were carried out by means of a canoe, ropes and graduated metal rod. Velocity measurement was carried out by means of Table tennis egg, Orange, 0.5 and 1 liter plastic bottle partially filled with water and a stop clock. Ten different measurements were carried out at various locations along the river. Data were subjected to one – way ANOVA using the Genstat statistical package discovery edition 3 to determine the weekly mean and standard deviation of estimated discharge records for the stream. Results show significant difference (p < 0.05) in discharge measured with varying weight of floats. It was observed that though the pattern of discharge measured values were similar in all the selected float weight, the discharge increases with decreasing weight of float.
- Author Biographies
- References
-
Arora K. R (2009). Irrigation, Water Power and Water Resources Engineering.Publisher – Jain A.K for Standard Publishers Distributions, 1705-B, NAI SARAK, Delhi.
Biran Adrian, López-Pulido Rubén, 2014. Basic ship hydrostatics. Ship Hydrostatics and stability (2nd edition ). 23 – 75p. https://doi.org/10.1016/B978-0-08-098287-8.00002-5
Callade J; Kosuth P; Guyot J.L; Guimaraes V. S.(2000).Discharge determination by acoustic Doppler current profilers (ADCP): a moving bottom error correction methed and its application on the river Amazon at Obidos. Hydrological Sciences Journal, Vol. 45 No: 6 pp 911-924.
Chen Y. C; Chiu C. L. (2004). A fast method of flood discharge estimation. Hydrological processes, Vol. 18 pp 1671 – 1684.
John D. Fenton and Robert J. Keller (2002). The Calculation of streamflow from Measurement of stage . Cooperative Research Centre for catchment Hydrology. Flood Hydrology Program report
John Fulton and Joseph Ostrowski (2008). Measuring real-time streamflow using emerging technologies: Radar, hydroacoustic, and the probability concept.U. S. Geological Survey, Pennsylvania Water Science Center and Atlantic River Forecast Center USA.
Muste, M., Fujita, I., Hauet, A. (2008). Water Resources Research., 44 (1): 44-52. https://doi.org/10.1029/2008WR006950
Oberg, K and Mueller, D. S. (2007).Validation of streamflow measurement s made with Acoustic Doppler current Profilers. Journal of Hydraulic Engineering, Vol. 133 No: 12 pp 1421-1432.
Otuagoma, S. O.; Ogujor, E. A. and Kuale, P. A. (2015). Comparative measurement of stream flow in the ethiope River for small hydropower development. Nigerian Journal of Technology (NIJOTECH). Published by Faculty of Engineering, University of Nigeria, Nsukka, Vol. 34 No. 1. 84 – 192pp.
Rantz, S.E. (1982), Measurement and computation of streamflow, USGS Water Supply Paper, 1
- Downloads
- Published
- 2021-04-06
- Section
- Articles
- License
-
Copyright (c) 2021 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- Babalola, H. I, FACTOR ANALYSIS OF RECRUITMENT AND SELECTION ATTRIBUTES TO PROMOTE WORKFORCE PERFORMANCE IN THE NIGERIAN CONSTRUCTION INDUSTRY , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- Satimehin, A., Fayose, F, Adewale D, Adewoyin. O, EFFECT OF EXTRUSION PROCESS ON PERFORMANCE OF AN INDIGENOUS EXTRUDER AND QUALITY OF CASSAVA PRODUCTS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 16 No. 1 (2022): FUTA Journal of Engineering and Engineering Technology
- T. B. Afeni, Slope Monitoring using Total Station – a look at the effect of glass shapes on distance measurements with total station , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 1 (2015): FUTA Journal of Engineering and Engineering Technology
- Olanrewaju Oluwafemi Akinfala, Emmanuel Enyeribe Ege, Ladi Folorunso Ogunwolu, ARRIVAL PATTERNS AND TRAFFIC FLOW CHARACTERISTICS AT SIGNALIZED INTERSECTIONS: CONSIDERING UPSTREAM SIGNAL INFLUENCE AND TIME RESOLUTIONS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 1 (2021): FUTA Journal of Engineering and Engineering Technology
- Dr. Kayode S. Famuagun, Prof. Tunbosun S. Oni, DAMPING EFFECTS ON THE DYNAMIC BEHAVIOUR OF BEAM-TYPE STRUCTURE WITH CLASSICAL BOUNDARY CONDITIONS UNDER MOVING DISTRIBUTED LOAD , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 2 (2026): FUTA Journal of Engineering and Engineering Technology
- Oladele, I.O, Akinwekomi, A.D, Ojo, O.O, Bichang’a, D.O, Adelabu S.O, Ezemenike, C. S, Adewumi, V.A, Taiwo, A.S, PARTIALLY REPLACED CEMENT BASED PAPER PARTICLES-WOOD SAW DUST-COCONUT FIBER CMPOSITES FOR LOW LOAD BEARING CAPACITY AND LIGHT-WEIGHT CIVIL CONSTRUCTIONS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- Talabi H. K. , GREEN SYNTHESIS AND CHARACTERIZATION OF COPPER NANOPARTICLES AS REINFORCEMENT IN EPOXY BASED COMPOSITE USING SPONDIAS MOMBIN LEAF EXTRACT , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- Ikem, I.A., Akintunde, M. A, Titiladunayo, I. F, Awatt.E, INVESTIGATING THE THERMODYNAMIC CHARACTERISTICS OF ENERGY SAVING REFRIGERATING SYSTEM WITH COLD ACCUMULATOR , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 2 (2025): FUTA Journal of Engineering and Engineering Technology
- R. F. Falayi, P. A. Adeduntan, EFFECTS OF WOODASH AND SAWDUST ADMIXTURE ON ENGINEERING PROPERTIES OF BURNT LATERITE CLAY BRICKS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- Adeyi, T. A, Sadiq, T. O, Olawore, A. S, Diji, C. J, INVESTIGATION OF OPTIMAL DRYING MEDIA FOR SELECTED AGRICULTURAL PRODUCE IN NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 16 No. 2 (2022): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.
