Determining The Metal Contents of Leach Liqour from Ihietutu Lead and Zinc Ore, Nigeria
- Authors
-
-
E. O. Ajaka
Department of Mining Engineering, School of Engineering and Engineering Technology, Federal University of Technology Akure, Nigeria.
-
O. E. Abiodun
Department of Mining Engineering, School of Engineering and Engineering Technology, Federal University of Technology Akure, Nigeria.
-
- Keywords:
- Array, Array, Array, Array, Array, Array, Array
- Abstract
-
This study characterized and recovered metals from Ihietutu lead-zinc sample Galena grains are interlocked with sphalerite and gangue minerals. Autogenous and media assisted grinding tests were studied in addition of difference and new mass charged modes. Gravity method for the production of a concentrate was also carried out using spiral separator with optimum recovery at +600 µm and highest loss at +125-53 µm. Also, the rate of leaching increased with time and an average of 88 g and 125 g was leached into the solution after three days for microwave pretreated and as-mined ore respectively. The final leachate contains 150 mg Pb/kg, 34 mg Zn/kg in aqua regia as-mined, 185 mg Pb/kg, 54.25 mg Zn/kg in aqua regia microwave pretreated, 137.20 mg Pb/kg, 21.50 mg Zn/kg in H2SO4 as-mined and 160.40 mg Pb/kg, 37.67 mg Zn/kg in H2SO4 microwave pretreated. The result from leaching revealed that aqua-regia has stronger ability for better yield than sulphuric acid in both microwave pretreated sample and as-mined sample respectively. Weight loss during roasting was 3.81%.
- References
- Downloads
- Published
- 2020-04-09
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- A. A. Akinlabi, A. P. Faluyi, J. M. Iberedem, F. M. Dahunsi, INTERNLY: A MOBILE PLATFORM FOR CONNECTING NIGERIAN STUDENTS TO INTERNSHIP OPPORTUNITIES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- J. A. V. Famurewa, C. J. Oladejo, Isotherm Models of Tacca Starch (Tacca Involucrata) at Ambient Temperature Using Some Common Packaging Materials , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 10 No. 2 (2016): FUTA Journal of Engineering and Engineering Technology
- W. O. Apena, G. A. Oladunni, Comparative Analysis of Path Loss Prediction Models for Selected Rural Areas in Ondo State, Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- Oyeleye, M. O, Melodi, A. O. , MODELING OF EFFICACIOUS LIGHTNING PROTECTION SCHEME ON NIGERIAN 11-132 kV SUBSTATIONS USING CONE OF PROTECTION METHODS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 1 (2023): FUTA Journal of Engineering and Engineering Technology
- I. O. Adejumobi, REVIEW OF CONVOLUTIONAL NEURAL NETWORK MODEL FOR OBJECT DETECTION, LOCALIZATION AND CLASSIFICATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- Adeyemo, Z.K, Bamikefa, I.A, Akande D.O, Ojo, S.I., , Ojerinde, I. A, OPTIMIZATION OF COST 231-HATA PROPAGATION MODEL FOR SELECTED FREQUENCY MODULATION STATIONS IN OSUN STATE, NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 1 (2023): FUTA Journal of Engineering and Engineering Technology
- Oji, I. C., Ale, T. O, Odeyemi, C. S, MODELLING AND SIMULATION OF FAULTS AND FAULT LOCATION DETECTOR FOR RADIAL DISTRIBUTION SYSTEM , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- Ajaka, E. O, Omotehinse, A. O, Kaunda L, MODELS FOR OPERATIONAL CONTINUITY OF A PRECIOUS METAL MINE UNDER FLUCTUATING COMMODITY MARKET , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 2 (2023): FUTA Journal of Engineering and Engineering Technology
- E. O. Olutomilola, T. I. Ogedengbe, Evaluation of the Effect of Constituents on Insulation Quality of Selected Biomass Composites , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 1 (2017): FUTA Journal of Engineering and Engineering Technology
- A. P. Olalusi, M. S. Obot, A. S. Ogunlowo, Modelling the Dehydration Characteristics of Taro (Colocasia Esculenta) Slices in a Convective Cabinet Dryer , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 1 (2014): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.