STORABILITY POTENTIAL OF CARROT (Daucuscarota L.) UNDER STEM SPONGE PADDED EVAPORATIVE COOLING STRUCTURES
- Authors
-
-
Oyebola Olabinjo
a:1:{s:5:"en_US";s:50:"Federal University of Technology Akure, Ondo State";}
-
- Keywords:
- Array
- Abstract
-
A zero energy stem sponge padded evaporative cooling storage was evaluated using fresh carrots (Daucuscarota L.) with control refrigerator and a similar structure without any cooling pad. The overall percentage loss in weight (during the period of experiment) of the carrot was much in the refrigerator (53.97%) and control structure (32.80%) compared to those stored in the evaporative cooling structure (25.19%). Similarly, trend of result was recorded in firmness, loss in firmnesss of the carrots stored in the control structure was greater than the ones in the evaporative cooling sytructre. However, the evaluation of the evaporative cooling system shows that the carrots can be stored for an average of twelve (12) days with negligible changes in weight, colour and firmness unlike the refrigerator and the control structure which noticeable changes began to occur from the fifth day. The modification of the microclimate by use of the zero energy evaporative and evapotranspirative cooling principles helps attain the microclimate conditions favourable for longer storage periods. With reference to the developed stem sponge padded cooler in this study, the modified environment helped in reducing respiration and metabolic rates in the stored carrots. The high relative humidity and low temperatures in the padded evaporative cooling system discouraged microorganism action on the stored carrots leading to a lengthened shelf-life
- References
- Downloads
- Published
- 2021-11-29
- Section
- Articles
- License
-
Copyright (c) 2021 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- I. O. Oladele, O. G. Agbabiaka, O. S. Akinola, H. K. Talabi, Development of Sponge Fiber and Particulate Palm Kernel Shell Ash Reinforced Polypropylene Hybrid Composites , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 10 No. 2 (2016): FUTA Journal of Engineering and Engineering Technology
- Faluyi, S. O.,, Amu, O. O., Adetoro, E. A., GEOTECHNICAL PROPERTIES OF LIME AND BAMBOO STEM ASH STABILIZED SOILS FOR ROAD CONSTRUCTION IN SOUTH-WESTERN NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 16 No. 1 (2022): FUTA Journal of Engineering and Engineering Technology
- I. O. Oladele, O. G. Agbabiaka, A. S. Ogunbadejo, M. A. Okoro, Assessment of Mechanical Properties of Hybrid Composites Based on Polypropylene and Vegetable Fibers , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 2 (2015): FUTA Journal of Engineering and Engineering Technology
- M. A. Akintunde, K A ADETORO, T. J. Abioye, Development of Refrigeration System for Storage and Preservation of Yam Tubers , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- Agbolade, O. A, Ogunyemi, B. I., DEVELOPMENT OF A LIBRARY MANAGEMENT SYSTEM ON A RASPBERRY PI BASED WIRELESS LOCAL AREA NETWORK , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- Ajibade Fidelis Odedishemi , SPATIAL ANALYSIS OF URBANIZATION IMPACTS ON WATER RESOURCES USING GEOGRAPHIC INFORMATION SYSTEM IN KANO CITY , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- O. ADERINLEWO, B. ARIBISALA, A. AFOLAYAN, M. TANIMOLA, COMPARATIVE ANALYSIS OF THE USE OF BAMBOO STEM ASH AND CEMENT FOR LATERITIC SOIL STABILIZATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 2 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- Tooki, O. O., , Abolade, R. O, Aborisade, D. O., MAPPING OF PLESIOCHRONOUS DIGITAL HIERARCHY SIGNALS INTO SYNCHRONOUS TRANSPORT MODULE FRAME FOR SYNCHRONOUS DIGITAL HIERARCHY SYSTEM , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 1 (2023): FUTA Journal of Engineering and Engineering Technology
- C. O. Ijagbemi, Design and Optimization of A Gas Turbine Waste Heat Recovery System , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- Apena, W. O, Odeyemi, C. S, A REVIEW OF BIOMETRIC FACIAL RECOGNITION ELECTRONIC VOTING SYSTEM: NIGERIA POLLS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.
