DEVELOPMENT OF A SPACE TECHNOLOGY CAPACITY BUILDING INITIATIVE AT THE FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, NIGERIA
- Authors
-
-
Folasade Dahunsi
Electrical and Electronics Engineering Department, The Federal University of Technology, Akure, Nigeria
-
Oluwasina Aderinwale
Electrical and Electronics Engineering Department, The Federal University of Technology, Akure, Nigeria
-
Abayomi Adesida
Electrical and Electronics Engineering Department, The Federal University of Technology, Akure, Nigeria
-
Abiola Alayande
Electrical and Electronics Engineering Department, The Federal University of Technology, Akure, Nigeria
-
J. Ojo
Electrical and Electronics Engineering Department, The Federal University of Technology, Akure, Nigeria
-
Oluwaseyi Falola
Mechanical Engineering Department, The Federal University of Technology, Akure, Nigeria
-
Oluwarotimi Dahunsi
Mechanical Engineering Department, The Federal University of Technology, Akure, Nigeria
-
- Keywords:
- Array, Array, Array, Array
- Abstract
-
Satellite communication is a wireless means of transmission of intelligible signals/information. When properly utilized it will bring about a great and positive development on the economic growth of any nation. The Federal Government of Nigeria made a giant step in the communication sector by launching five satellites into space: NigeriaSat-1, NigComSat- 1, NigeriaSat-2r, NigeriaSat-X and NigComSat-1R. With adequate spatial information, informed decisions can be made by stakeholders and adequate steps taken to ensure the growth of the nation. Demand for training capacity building in space technology is increasing. Unfortunately, space technology is a relatively expensive field with ongoing research for affordable training approaches. This paper presents methods of building capacity by developing Demo Satellites that receive telemetry data with radiofrequency and internet of things communication protocol. Web Dashboard was developed for remote monitoring of ground station and for exploring mobility in data communication, Localization was achieved to also track the Demo Satellites and the ground station in real-time. It is shown that the implementation of a low-cost capacity building programme is not only possible but a goal that should be aimed at. Multiple segments in the design of the schematics produced can be reused. It presents a pioneer satellite constellation prototype that displays the capabilities of a satellite in solving some of the country’s challenges and creating awareness on space research and its trends.
- References
-
Aro, H. O., and Adetoro, L. (2011). Nigeria Space Programs, National Space Research and Development Agency (NASRDA), Abuja, Federal Republic of Nigeria.
Boroffice, R. (2008). The Nigerian space programme: an update. African Skies, 12(40).
Dahunsi F. M., Dahunsi O. A., Olaide A. A. and Akinyede J. A. (2019). Space Science and Technology Research in Nigerian: Case of The Federal University Of Technology, Akure. In e-Proceedings of the 2019 SEET Annual Conference, Akure, 25th to 27th August 2019.
Levine G. (2020) Visualize Data from Sensors Using Arduino + Coolterm. Accessed 19th March 2020 from https://www.instructables.com/Visualize-data-from-sensors-using-Arduino-coolte/
Isoun, T. (2008). Space Landings. Nature, 456(35).
Jiménez, A. C., Jenkins, M., and J.C., G. (2017). SETec: The First Small-Satellite Dedicated Laboratory of Central America. 1st IAA Latin American Symposium on Small Satellites: Advanced Technologies and Distributed Systems.
Lawal, L. S., and Chatwin, C. R. (2012). The future of wireless communications in Africa. Future Wireless Networks and Information Systems: Springer, 243-251.
National Committee for Space and Radio Science. (2017, September). National Space Plan: A vision for space science and technology in Australia. Australian Academy of Science, pp. 1-23.
OECD. (2008). Science, Technology and Industry Outlook 2008. Organisation for Economic Co-operation and Development (OECD).
The Mathswork, Inc (2020) ThingSpeak for IoT projects. Accessed 19th March 2020 https://thingspeak.com/
Union of Concerned Scientists. (2013, November). Strategic Options for Chinese Space Science and Technology. In G. Kulacki (Ed.). China: Union of Concerned Scientists.
- Downloads
- Published
- 2021-04-06
- Section
- Articles
- License
-
Copyright (c) 2021 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- C. C. Chiabuotu, T. E. Abioye, O. M. Olabanji, ENHANCING DEPOSITION QUALITY OF ALUMINUM ALLOY 5356 THROUGH OPTIMIZATION OF WAAM PROCESS PARAMETERS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- Oladele, I.O, Akinwekomi, A.D, Ojo, O.O, Bichang’a, D.O, Adelabu S.O, Ezemenike, C. S, Adewumi, V.A, Taiwo, A.S, PARTIALLY REPLACED CEMENT BASED PAPER PARTICLES-WOOD SAW DUST-COCONUT FIBER CMPOSITES FOR LOW LOAD BEARING CAPACITY AND LIGHT-WEIGHT CIVIL CONSTRUCTIONS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- S. P. Ayodeji, M. K. Adeyeri, O. O. Oni, Conceptual Design of Battery Powered Vehicle for Children Amusement Park Using Nigerian Anthropometric Parameters , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 2 (2017): FUTA Journal of Engineering and Engineering Technology
- M. A. Musa, A. D. Akinwekomi, S. O. Seidu, PRODUCTION AND BIOMEDICAL POTENTIAL OF SILICA NANOPARTICLES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- R. F. Falayi, P. A. Adeduntan, EFFECTS OF WOODASH AND SAWDUST ADMIXTURE ON ENGINEERING PROPERTIES OF BURNT LATERITE CLAY BRICKS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- Charity Segun Odeyemi, Ayodeji Oladiran Awodugba, IMPROVING THE EFFICIENCY OF TITANIUM DIOXIDE BASED DYE SENSITIZED SOLAR CELL (DSSC) USING SILVER SURFACE COUNTER ELECTRODE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- Owojori, A.O., ROBOTIC MANIPULATOR MODEL AND CONTROL ESTIMATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 2 (2025): FUTA Journal of Engineering and Engineering Technology
- Ogundele, O. J, Adebisi, O. I, Adejumobi, I. A, Amusa, K. A. , Alabi, A. A, POWER QUALITY ENHANCEMENT IN AN ELECTRICAL DISTRIBUTION NETWORK USING SHUNT PASSIVE FILTER , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- M. A. Azeez, O. Oluwaseyi, A. A. Ajiboye, A. Iwayemi, Performance Evaluation of A Reverse Aodv And Aodv Routing Protocol Under Jellyfish Attacks in Mobile Ad Hoc Network , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 10 No. 1 (2016): FUTA Journal of Engineering and Engineering Technology
- B. Adebayo, Evaluation of the Performance of Atlas Copco SDR4 Rotary Drill In Sagamu Limestone Formation, Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.
