IMPLEMENTION OF A DSPACE CONTROL SYSTEM FOR A NON-ISOLATED DC-DC BOOST CONVERTER
- Authors
-
-
John Macaulay
a College of Engineering, Swansea University, Bay Campus, Fabian Way, Swansea SA1 8EN, Wales, United Kingdom
-
Brendan Ubochi
Department of Electrical and Electronics Engineering, The Federal University of Technology, Akure
-
- Keywords:
- Array, Array, Array
- Abstract
-
This paper presents the use of the dSPACE rapid control prototype (RCP) control system to implement a feedback control system for a conventional Boost DC-DC converter hardware to validate the converter's operation and performance during the research and development stage. The proposed system was implemented and tested using a conventional Boost DC-DC converter and a dSPACE (RCP) based control strategy. The advantage of employing this control platform for the converter is that it allows for the identification of design errors in the development process without the requirement for complicated control coding. Details of the DC-DC boost converter operations, the converter feedback dSPACE control system experimental setup and experimental test results are all presented in the paper. The results show that the system can conform to any set desired reference voltage.
- References
-
Taghvaee, M. H., Radzi, M.A.M., Moosavain, S. M., Hizam, H. & Hamiruce, M. M. (2013). A Current and Future Study on Non-isolated DC-DC Converters for Photovoltaic Applications. Renewable and Sustainable Energy Reviews, 17(C), 216 - 227.
Grbovic, P. J. (2014). Ultra-Capacitors in Power Conversion Systems: Applications in Analysis and Design from Theory to Practice. Chichester, West Sussex, United Kingdom: John Wiley & Sons.
Jeremy, L, J, Ooi, C. A., Teh, J. (2020).Non-isolated Conventional DC-DC Converter Comparison for a Photovoltaic System: A review. Journal of Renewable and Sustainable Energy, 12 (1), 013502.
Raghavendra, K. V. G., Zeb, K., Muthusamy, A., Krishna, T. N. V., Kumar, S. V. S. V. P., Kim, D.-H, Kim, M.-S., Cho, H.-G., Kima, H.- J. (2019). A Comprehensive Review of DC-DC Converter Topologies and Modulation Strategies with Recent Advances in Solar Photovoltaic Systems. Electronics, 9 (1), 31.
Abdelsalam, M. E., Kamil, C. B. (2019). Non-isolated Multi-Port Inverter Topologies for Renewable Energy Applications: A Review. 1st Global Power Energy and Communication Conference (GPECOM), 321-330.
Khader, S. (2011). Design and Simulation of a Chopper Circuits Energized by Photovoltaic Modules. In 2011 IEEE GCC Conference and Exhibition (GCC), U.A.E., 73-76.
Mohan, N., Undeland, T. M., Robbins, W. P. (2003). Power Electronics: Converters, Applications and Design, Hoboken, N.J: John Wiley and Sons.
Varshney, A., Kumar, R., Kuanr, D., Gupta, M. (2014). Soft-Switched Boost DC-DC Converter System for Electric Vehicles using an Auxiliary Resonant Circuit. International Journal of Emerging Technology and Advanced Engineering, 4 (3), 845-850.
Mohamed, A., Mohamed. O. (2010). Smart Optimal Control of DC-DC Boost Converter in PV Systems. Proc. IEEE/PES Transmission and Distribution Conference and Exposition: Latin America, 403-410.
Bae, G.-T., Kang, F.-s. (2013). Bidirectional DC-to-DC Converter Employing a Selective Switch and Two Inductors for Optimal Operation in Buck and Boost Mode. Proc. International Conference Electrical Machines and Systems (ICEMS), 1727-1730.
- Cover Image
-
- Downloads
- Published
- 2021-04-06
- Section
- Articles
- License
-
Copyright (c) 2021 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- Oji, I. C., Ale, T. O, Odeyemi, C. S, MODELLING AND SIMULATION OF FAULTS AND FAULT LOCATION DETECTOR FOR RADIAL DISTRIBUTION SYSTEM , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- M. A. Akintunde, K A ADETORO, T. J. Abioye, Development of Refrigeration System for Storage and Preservation of Yam Tubers , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- Agbolade, O. A, Ogunyemi, B. I., DEVELOPMENT OF A LIBRARY MANAGEMENT SYSTEM ON A RASPBERRY PI BASED WIRELESS LOCAL AREA NETWORK , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- Arowolo, M.O., , Adaralode, C.I. , Ogundigba, H.B, DEVELOPMENT AND IMPLEMENTATION OF A COMPUTER VISION-BASED POTHOLE DETECTOR USING INFRARED CAMERA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 2 (2023): FUTA Journal of Engineering and Engineering Technology
- M. O. Oyeleye, T. O. Ale, Foundational Steel Reinforcement Earthing Evaluation: Case of Ogomudia Electrical/Electronics Laboratory Building Extension, Federal University Of Technology, Akure , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- Ogundele, O. J, Adebisi, O. I, Adejumobi, I. A, Amusa, K. A. , Alabi, A. A, POWER QUALITY ENHANCEMENT IN AN ELECTRICAL DISTRIBUTION NETWORK USING SHUNT PASSIVE FILTER , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- Ubochi, B. C, Olawumi, A. E., , Shuiabu, A. O. , Akingbade, K. F, A WEARABLE FACIAL RECOGNITION DEVICE FOR THE VISUALLY IMPAIRED , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- Ijagbemi, C.O. , Olabanji, O. M, Abdulmumuni, B, Ashiru, A.R, IJagbemi F.M, PRODUCTION OF ETHANOL GEL FROM CASSAVA AND BANANA PEELS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- Olutomilola E. O., Otokola T. O. , Ajayi V. A., DEVELOPMENT OF AN ADJUSTABLE HOPPER FOR HAMMER MILL , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- F. M. Dahunsi, S. O. Oluponna, Analysis of Energy Usage Pattern of a Nigerian University Digital Resource Center (DRC):: FUTA DRC as a Case Study , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.