Evaluation of the Impacts of Load Variation on Vibration and Quality of Power Generated in Standalone Generator
- Authors
-
-
A. I. Onile
-
M. R. Adu
-
Olayinka Oyeleye
Federal University of Technology, Akure
-
- Keywords:
- Array, Array, Array, Array, Array
- Abstract
-
Standalone generators are vital for supplying electricity in remote areas and serving as backup systems where national grid power is unavailable. Their performance and longevity, however, are often compromised by load variations during operation. This study investigates the impacts of load fluctuations on vibration behaviour and power quality in two standalone generators of different ratings: Generator 1 (TG950, 0.650 kVA) and Generator 2 (SENWEI, 1.5 kVA). Experiments were conducted using resistive loads to simulate real-world operating conditions. The methodology encompassed three stages: analyzing vibration levels under varying load types, assessing voltage and current stability, and developing a predictive model to estimate the effects of load variation. Results showed that load variations influence both vibration intensity and electrical output, with measurable deviations in power parameters of voltage and current under different load conditions. It is concluded that varying loads significantly increase vibrations due to added mechanical stress; and fluctuating loads disrupt voltage and frequency stability. In order to enhance generator performance and reduce vibration issues, implementing effective load management strategies is essential. Future research should explore advanced monitoring and control methods to notify vibration beyond acceptable limit on time in order to maintain generator stability and efficiency.
- References
-
Ahmed. F. (2020). Power Quality in Stand-Alone Renewable Energy Systems Publisher: MDPI (Multidisciplinary Digital Publishing Institute)
El-Sharkawy. M.A, Abou-El-Ezz. A. A and El-Sayed . M.A (2022). “Power Quality in Power Systems, Journal of Electrical Engineering and Technology.Volume: 17, Issue: 3, Pages: 645-658 DOI: 10.5370/JEET.2022.17.3.645
IEE std (2019). Guide for synchronous Generator modeling practices and parameter verification with applications in power system stability pp. 1-72
Iowa State University Engineering, (2021) Generator Response to Load Variation Iowa State Universi home.engineering.iastate.edu/~jdm/ee554
Li, Y., Zhang, Y., and Xu, X. (2021). Vibration analysis of a standalone diesel generator set. Journal of Vibration and Acoustics, Vol 43 no.4, pp 041007.
Manoj Joseph (2020) Electrical Load increase on Generator = More Fuel Consumption electromagnetism - Electrical Load increase on Generator = More Fuel Consumption - Electrical Engineering Stack Exchange
Pietro Tumino (2020) Frequency Control in a Power System - Technical Articles (epower.com)
- Downloads
- Published
- 2026-11-09
- Section
- Articles
- License
-
Copyright (c) 2026 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- F. M. Dahunsi, S. O. Oluponna, Analysis of Energy Usage Pattern of a Nigerian University Digital Resource Center (DRC):: FUTA DRC as a Case Study , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- M O Idris, EVALUATION OF EFFECTS OF EXTERNAL FACTORS ON DUE DATES PREDICTION IN MANUFACTURING JOBSHOPS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 2 (2018): FUTA Journal of Engineering and Engineering Technology
- Ezemenike, C. S., Aderinlewo, O. O., Oladele, I. O., Oyedepo, O. J., EVALUATION OF MARSHAL STABILITY AND FLOW OF HYBRID MODIFIED ASPHALT CONCRETE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 16 No. 1 (2022): FUTA Journal of Engineering and Engineering Technology
- B. Adebayo, Evaluation of the Performance of Atlas Copco SDR4 Rotary Drill In Sagamu Limestone Formation, Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- E O Olutomilola, A Omoaka, THEORETICAL DESIGN OF A PLANTAIN PEELING MACHINE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 2 (2018): FUTA Journal of Engineering and Engineering Technology
- W. A. Raheem, A. O. Ajayeoba, K. A. Adebiyi, O. R. Oyetunji, O. A. Ayeyemi, Ergonomic Evaluation of Base Transceiver Station Maintenance Personnel in Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- M. M. Melodi, T. G. Onipede, Economic Appraisal of Some Selected Quarries Operation in Ondo State, Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 2 (2017): FUTA Journal of Engineering and Engineering Technology
- E. O. Olutomilola, T. I. Ogedengbe, Evaluation of the Effect of Constituents on Insulation Quality of Selected Biomass Composites , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 1 (2017): FUTA Journal of Engineering and Engineering Technology
- O. Z. Ayodeji, A. A. Adegun, S. A. Anjorin, DEVELOPMENT AND PERFORMANCE EVALUATION OF A SMALL-SCALE GROUNDNUT SHELLING MACHINE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- Dr. Kayode S. Famuagun, Prof. Tunbosun S. Oni, DAMPING EFFECTS ON THE DYNAMIC BEHAVIOUR OF BEAM-TYPE STRUCTURE WITH CLASSICAL BOUNDARY CONDITIONS UNDER MOVING DISTRIBUTED LOAD , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 2 (2026): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.
