Evaluation of the Impacts of Load Variation on Vibration and Quality of Power Generated in Standalone Generator
- Authors
-
-
A. I. Onile
-
M. R. Adu
-
Olayinka Oyeleye
Federal University of Technology, Akure
-
- Keywords:
- Array, Array, Array, Array, Array
- Abstract
-
Standalone generators are vital for supplying electricity in remote areas and serving as backup systems where national grid power is unavailable. Their performance and longevity, however, are often compromised by load variations during operation. This study investigates the impacts of load fluctuations on vibration behaviour and power quality in two standalone generators of different ratings: Generator 1 (TG950, 0.650 kVA) and Generator 2 (SENWEI, 1.5 kVA). Experiments were conducted using resistive loads to simulate real-world operating conditions. The methodology encompassed three stages: analyzing vibration levels under varying load types, assessing voltage and current stability, and developing a predictive model to estimate the effects of load variation. Results showed that load variations influence both vibration intensity and electrical output, with measurable deviations in power parameters of voltage and current under different load conditions. It is concluded that varying loads significantly increase vibrations due to added mechanical stress; and fluctuating loads disrupt voltage and frequency stability. In order to enhance generator performance and reduce vibration issues, implementing effective load management strategies is essential. Future research should explore advanced monitoring and control methods to notify vibration beyond acceptable limit on time in order to maintain generator stability and efficiency.
- References
-
Ahmed. F. (2020). Power Quality in Stand-Alone Renewable Energy Systems Publisher: MDPI (Multidisciplinary Digital Publishing Institute)
El-Sharkawy. M.A, Abou-El-Ezz. A. A and El-Sayed . M.A (2022). “Power Quality in Power Systems, Journal of Electrical Engineering and Technology.Volume: 17, Issue: 3, Pages: 645-658 DOI: 10.5370/JEET.2022.17.3.645
IEE std (2019). Guide for synchronous Generator modeling practices and parameter verification with applications in power system stability pp. 1-72
Iowa State University Engineering, (2021) Generator Response to Load Variation Iowa State Universi home.engineering.iastate.edu/~jdm/ee554
Li, Y., Zhang, Y., and Xu, X. (2021). Vibration analysis of a standalone diesel generator set. Journal of Vibration and Acoustics, Vol 43 no.4, pp 041007.
Manoj Joseph (2020) Electrical Load increase on Generator = More Fuel Consumption electromagnetism - Electrical Load increase on Generator = More Fuel Consumption - Electrical Engineering Stack Exchange
Pietro Tumino (2020) Frequency Control in a Power System - Technical Articles (epower.com)
- Downloads
- Published
- 2026-11-09
- Section
- Articles
- License
-
Copyright (c) 2026 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- Brendan Ubochi, DEVELOPMENT OF AN ELECTRIC POWER OUTAGE MONITORING AND LOGGING SYSTEM , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- A. O. Owolabi, P. A. Adesida, COST EVALUATION FOR ASPHALT PRODUCTION IN SELECTED QUARRIES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 1 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- Ojo, O. O , Ajayi, B. O, FRACTURE BEHAVIOR AND MECHANICAL PERFORMANCE OF DISSIMILAR FRICTION STIR CLINCHED CU/AL JOINT , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 16 No. 1 (2022): FUTA Journal of Engineering and Engineering Technology
- H. A. Owolabi, B. V. Omidiji, O. C. Falade, Optimization of Poultry Feeds Production Using Linear Programming Technique , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 1 (2015): FUTA Journal of Engineering and Engineering Technology
- Jegede, B. M, Ojo, O. T, Akinnuli, B. O., EMPIRICAL MODEL AND SOFTWARE DEVELOPMENT FOR CRUDE OIL CARGO QUANTITY MEASUREMENT AND DISCREPANCIES DETERMINATION IN NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 16 No. 1 (2022): FUTA Journal of Engineering and Engineering Technology
- W. O. Apena, I. Osahon, W. O. Popoola, Investigation of Multilevel Transmission for SI-Plastic Optical Fibre (POF) Channel: PAM and OFDM , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- IDOWU Abimbola Samson , ADEWUYI B.O, FOLORUNSO D.O, AKINWEKOMI A. D., OPTIMUM INFLUENCE OF CHROMIUM AND COMBINE AUSTEMPERING-CRYOGENIC TREATMENTS ON PERFORMANCE OF DUCTILE IRON , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- O. O. Awopetu, P. K. Farayibi, K. A. Ismail, Optimization of Major Process Parameters for Surface Roughness of ASTM 25 Grey Cast Iron using Taguchi method , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 2 (2017): FUTA Journal of Engineering and Engineering Technology
- Dafiewhare, O, Ijagbemi, C. O, Ologunwa, T. P, Alabi, O. T, Ijagbemi, A. O, PRODUCTION AND EVALUATION OF BIOMASS BRIQUETTES FROM PALM KERNEL SHELL AND COCONUT HUSK , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 2 (2025): FUTA Journal of Engineering and Engineering Technology
- A. M. Akintade, O. J. Olukunle, J. Isa, Performance Evaluation of an Electromechanical Groundnut Roasting Machine Akintade A.M, Olukunle O. J. and Isa J. , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 2 (2014): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.
