Evaluation of the Impacts of Load Variation on Vibration and Quality of Power Generated in Standalone Generator
- Authors
-
-
A. I. Onile
-
M. R. Adu
-
Olayinka Oyeleye
Federal University of Technology, Akure
-
- Keywords:
- Array, Array, Array, Array, Array
- Abstract
-
Standalone generators are vital for supplying electricity in remote areas and serving as backup systems where national grid power is unavailable. Their performance and longevity, however, are often compromised by load variations during operation. This study investigates the impacts of load fluctuations on vibration behaviour and power quality in two standalone generators of different ratings: Generator 1 (TG950, 0.650 kVA) and Generator 2 (SENWEI, 1.5 kVA). Experiments were conducted using resistive loads to simulate real-world operating conditions. The methodology encompassed three stages: analyzing vibration levels under varying load types, assessing voltage and current stability, and developing a predictive model to estimate the effects of load variation. Results showed that load variations influence both vibration intensity and electrical output, with measurable deviations in power parameters of voltage and current under different load conditions. It is concluded that varying loads significantly increase vibrations due to added mechanical stress; and fluctuating loads disrupt voltage and frequency stability. In order to enhance generator performance and reduce vibration issues, implementing effective load management strategies is essential. Future research should explore advanced monitoring and control methods to notify vibration beyond acceptable limit on time in order to maintain generator stability and efficiency.
- References
-
Ahmed. F. (2020). Power Quality in Stand-Alone Renewable Energy Systems Publisher: MDPI (Multidisciplinary Digital Publishing Institute)
El-Sharkawy. M.A, Abou-El-Ezz. A. A and El-Sayed . M.A (2022). “Power Quality in Power Systems, Journal of Electrical Engineering and Technology.Volume: 17, Issue: 3, Pages: 645-658 DOI: 10.5370/JEET.2022.17.3.645
IEE std (2019). Guide for synchronous Generator modeling practices and parameter verification with applications in power system stability pp. 1-72
Iowa State University Engineering, (2021) Generator Response to Load Variation Iowa State Universi home.engineering.iastate.edu/~jdm/ee554
Li, Y., Zhang, Y., and Xu, X. (2021). Vibration analysis of a standalone diesel generator set. Journal of Vibration and Acoustics, Vol 43 no.4, pp 041007.
Manoj Joseph (2020) Electrical Load increase on Generator = More Fuel Consumption electromagnetism - Electrical Load increase on Generator = More Fuel Consumption - Electrical Engineering Stack Exchange
Pietro Tumino (2020) Frequency Control in a Power System - Technical Articles (epower.com)
- Downloads
- Published
- 2026-11-09
- Section
- Articles
- License
-
Copyright (c) 2026 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- Ashiru Mohammed, Ibrahim Aliyu, Hussaini Abdullahi Umar, Aliyu Umar Mani, PERFORMANCE EVALUATION OF RAILWAY BALLAST DEGRADATION USING THE MORPHOLOGICAL PROPERTIES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- FADUGBA O.G., EVALUATION OF STRENGTH AND LEACHING PROPERTIES OF SNAIL SHELL ASH (SSA) REMEDIATED PETROLEUM HYDROCARBON CONTAMINATED LATERITIC SOILS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- Ugwu, S. J, Nwude, M. O, Shariff, F. U, ANALYSING THE IMPACT OF URBANISATION ON PHYSICO-CHEMICAL GROUNDWATER PARAMETER OF KADUNA METROPOLIS, USING STATISTICAL APPROACH AND BASIC DRINKING WATER STANDARD , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 1 (2023): FUTA Journal of Engineering and Engineering Technology
- Ojo, O. T, Mogaji, T. S, Adeyeri, M. K, Ayodeji, S. P, Fagbemi, T. N, DESIGN AND FINITE ELEMENT ANALYSIS OF AN INDUSTRIAL-BASED VEGETABLE LEAF WASHING MACHINE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 16 No. 1 (2022): FUTA Journal of Engineering and Engineering Technology
- T. B. Afeni, A. I. Lawal, S. J. Omosayin, Evaluation of Alluvial Ore Reserve in an Abandoned Consolidated Tin Mine, Bukuru- Jos Plateau State , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 2 (2015): FUTA Journal of Engineering and Engineering Technology
- F. O. Ajibade, J. R. Adewumi, Performance Evaluation of Aquatic Macrophytes in a Constructed Wetland for Municipal Wastewater Treatment , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 1 (2017): FUTA Journal of Engineering and Engineering Technology
- M. O. Oyeleye, T. O. Ale, Foundational Steel Reinforcement Earthing Evaluation: Case of Ogomudia Electrical/Electronics Laboratory Building Extension, Federal University Of Technology, Akure , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- Babalola, H. I, FACTOR ANALYSIS OF RECRUITMENT AND SELECTION ATTRIBUTES TO PROMOTE WORKFORCE PERFORMANCE IN THE NIGERIAN CONSTRUCTION INDUSTRY , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- Arowolo, M.O, Abraham, I.O, Olukoya, O.L, Olujoyinbo, E.D, Ade-Omowaye, J.A, DEVELOPMENT OF A FACE-TRACKING ROBOT FOR SAFE DRIVING APPLICATIONS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 2 (2023): FUTA Journal of Engineering and Engineering Technology
- I O OLADELE, O O DARAMOLA, A M OKORO, J A OMOTOYINBO, EVALUATION OF THE EFFECT OF MERCERIZED WHITE CHICKEN FEATHER FIBRES ON THE MECHANICAL , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.
