Evaluation of Akure 132kV Transformer Substation Load Growth Trend
- Authors
-
-
T. O. Ale
FEDERAL UNIVERSITY OF TECHNOLOGY AKURE, ONDO STATE
-
- Keywords:
- Array, Array, Array, Array
- Abstract
-
Statistical method of the least squares was used in long term load growth forecast based on retrospective load growth data (2003-2023) for Akure 132kV Injection substation. Growth trend was established and the smoothening of the actual growth dynamics was achieved by applying moving averages. The load growth trend line equations obtained enable the determination of load forecast estimate up to 2023. It was inferred from the results that the load growth forecast estimate for transformers, T1A, T2A, T3A and FUTA line are 19.24MW, 28.02MW, 45.02MW and 1.05MW respectively for a period of ten years.
- References
-
Nwachukwu, V. O. (2005): Introduction to Statistic. 5th Edition. Peace Publishers, Owerri, Nigeria 269pp.
Nwachukwu, V. O. (2006): Principles of Statistical inference. 2nd Edition. Zelon Enterprises, PortHarcourt, Rivers State 356pp
Oroge, C. O. (1991): Fundamentals of Reliability and Testing Methods. 1st Edition. Sooji Press Limited, Kaduna, Nigeria 166pp
Akure Business Unit (2003): Power Holding Company of Nigeria PLC,Akure Billing Register for FUTA
IEE (1981): Regulations for Electrical Installation. 15th Edition. 193pp.
Nagrath, I. J. and Kothari, D. P, (1994): Power System Engineering. Tata McGraw Publishing Company Limited 150pp
Olorunnisola, A. O. (2004): Technical Report Writing and Presentation. 1st Edition. Ibadan, Nigeria 89pp
Power Holding Company of Nigeria PLC, PHCN, (2007): Safety Rules and Standard Protection Codes. 41pp.
Skipper Electricals (2008): Power Transformer Testing gets a new Tool: FRATesting. Way Forward (3): 4-5
- Downloads
- Published
- 2019-01-02
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- Oluwatoyin Olaseinde, O. Ajanaku, O. M. Ojo, S. O. Seidu, COMPARATIVE STUDY OF THE REINFORCED STEEL BARS OBTAINED FROM A FAILED RESIDENTIAL BUILDING AND THE SHELVES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- O. O. Awopetu, P. K. Farayibi, K. A. Ismail, Optimization of Major Process Parameters for Surface Roughness of ASTM 25 Grey Cast Iron using Taguchi method , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 2 (2017): FUTA Journal of Engineering and Engineering Technology
- Oladele, I.O, Akinwekomi, A.D, Ojo, O.O, Bichang’a, D.O, Adelabu S.O, Ezemenike, C. S, Adewumi, V.A, Taiwo, A.S, PARTIALLY REPLACED CEMENT BASED PAPER PARTICLES-WOOD SAW DUST-COCONUT FIBER CMPOSITES FOR LOW LOAD BEARING CAPACITY AND LIGHT-WEIGHT CIVIL CONSTRUCTIONS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- S. T. Olowolafe, C. M. Ikumapayi, S. L. Akingbonmire, A. A. Olododo, J. A. Ajayi, INFRA-LIGHTWEIGHT CONCRETE: A COMPREHENSIVE REVIEW OF STRUCTURAL AND THERMAL PERFORMANCE WITH SUSTAINABLE AGGREGATES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- M. A. Azeez, O. Oluwaseyi, A. A. Ajiboye, A. Iwayemi, Performance Evaluation of A Reverse Aodv And Aodv Routing Protocol Under Jellyfish Attacks in Mobile Ad Hoc Network , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 10 No. 1 (2016): FUTA Journal of Engineering and Engineering Technology
- Akinola, A. O, Olusola, E. O, Olundegun, S. A1, DEVELOPMENT OF A PULVERIZING MACHINE FOR RAPHIA PALM SEEDS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- Abdalla Esmaeel, Sesan Peter Ayodeji, Diana Starovoytova, Jerry Ochola, ERGONOMIC RISK SIMULATION USING RAPID UPPER LIMB ASSESSMENT TOOL FOR THE SITTING POSTURE OF GARMENTS WORKERS: A CASE OF RIVATEX EAST AFRICA LIMITED, ELDORET, KENYA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- Uwadia, O.A., Dahunsi, F.M., SOIL NUTRIENT PREDICTION AND CROP PREDICTION RECOMMENDATION SYSTEMS USING IOT AND AI TECHNIQUES: CURRENT TRENDS AND CHALLENGES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- C. S. Odeyemi, Trends in Internet of Things (IoT) Technology , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
You may also start an advanced similarity search for this article.