IMPROVING THE EFFICIENCY OF TITANIUM DIOXIDE BASED DYE SENSITIZED SOLAR CELL (DSSC) USING SILVER SURFACE COUNTER ELECTRODE
- Authors
-
-
Charity Segun Odeyemi
Department of Electrical Electronics Engineering, Federal University of Technology, Akure, Ondo State
-
Ayodeji Oladiran Awodugba
Department of Pure and Applied Physics, Ladoke Akintola University of Technology, Ogbomoso
-
- Keywords:
- Array
- Abstract
-
The high cost of processing crystalline silicon for solar cell has shifted research focus to cheaper materials for solar cell production. Although a variety of advanced approaches to solar cell are being investigated, dye sensitized solar cell (DSSC) is expected to offer one of the lowest manufacturing costs in the future because of its simplicity and use of cheap materials. However, the major challenge being faced in DSSC technology is its low efficiency. In an effort to improve the performance of DSSC, this work focused on the use of a silver surface glass for the counter electrode instead of the transparent glass which is normally used. Two solar cells were produced based on Gratzel method. In the first one, both the working electrode and the counter electrode were made of transparent conductive glass substrate. In the second cell, the titanium dioxide was coated on a transparent conductive glass electrode substrate to form the working electrode while a silver surface glass was used for the counter electrode. Teak extract was used as the organic dye sensitizer and potassium iodate as the electrolyte. The solar cell was then illuminated and tested. The results of the performance evaluations carried out show that the cell with silver surface counter electrode has an improved efficiency of about 400%. The result of the study therefore shows that the conductivity of the counter electrode material has effect on the performance of DSSC.
- References
-
Awodugba A. O. and Olabisi I. A. (2013): Fabrication of Dye Sensitized Solar Cell (DSSC) using ZnO Nanoparticles Synthesized from Zinc Nitrate Hexahydrate. Canadian Journal of Pure and Applied Sciences, Academic Publishers, British Columbia (7) 3 2635-2638
Lung-Chien C, Chih-Hung H, Po-Shun C, Xiuyu Z and Cing-Jhih H. (2014). Improving the performance of dye-sensitized solar cells with TiO2/graphene/TiO2 sandwich structure. Nanoscale Research Letters (1) 9,380.
Luttrell T, Sandamali H, Junguang T, Alan K, Eli S. & Matthias B. (2014) Review of Solar cell materials, Nature Scientific Journal (4) 3, 4043.
Mehmood U, Rahman S, Harrabi K, Hussein I. A., and Reddy B. V. S. (2014), Advances in Dye Sensitized Solar Cells. Advances in Materials Science and Engineering, (3) 7, 204
Moe M. A., Than T. W, Yin M. M, and Ko K. K. S. (2014): Binary Oxide Photoelectrode with coffee natural Dye Extract for DSSC Application. International Journal of Innovation and Scientific Reseach (8) 2, 276-282.
Pablo D, Stefan G, Tomas L, Nakita K. N, Ullrich S, and Henry J. S. (2014). From Dye-Sensitized Solar Cells to All-Solid-State Hybrid Devices. Material Review (3) 2, 45-50.
Shitta, M. B. O., Odeyemi, C. S., and Adetuyi A. O. (2008): The Photovoltaic Properties of some African Dyes, Material Science Research. (5) 2, 277-282.
Simon M. (2014): Dye Sensitized Solar Cells with 13% efficiency through the molecular Engineering of Porphyrin Sensitizers. Nature Chemistry (6), 242-247.
Christies, R. M. (2001): Colour chemistry, Royal Society of Chemistry, UK . Ch 4. 172-175.
Reeds, R. B. (1991): Systematic Mineralogy, Macmillan Publisher Limited UK. Ch 8 272-273.
White R. M. (1992): Solar Cell – From Basics to Advance System. McGraw-Hill, USA. Ch 12, 74-78.
Eddy Current Technology Inc. ECT (2014); Electrical Conductivity http://www.eddy-current.com.
Institute of Chemical Education ICE (2007): Recreating Photosynthesis, Nanocrystalline Solar Cell Manual. Department of Chemistry University of winsconsin- Madison.
US Energy Information Administration EIA (2016): International Energy Outlook. US Department of Energy, Washington DC, USA.
- Downloads
- Published
- 2019-04-29
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- O.A Olubosede, , K. B Adedeji, , C. S Odeyemi,, T. H Shabangu, , DESIGN AND IMPLEMENTATION OF A PID CONTROL FOR A DC MOTOR-DRIVEN BELT CONVEYOR SYSTEM , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 2 (2025): FUTA Journal of Engineering and Engineering Technology
- Olaniran Oladayo, DRUG DELIVERY AND DEGRADATION OF BIOFILM – A REVIEW , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- Adebayo Felix Owa, Abdulahi Olawale Adebayo, Olawale Olarewaju Ajibola, Oluwole Daniel Adigun, Sunday Gbenga Aborisade, Fisayo Adesina, Corrosion Behaviour of Low Carbon Steel in Sulphide Medium Using Thevetia Peruviana as Inhibitor , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 2 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- Uwadia, O.A., Dahunsi, F.M., SOIL NUTRIENT PREDICTION AND CROP PREDICTION RECOMMENDATION SYSTEMS USING IOT AND AI TECHNIQUES: CURRENT TRENDS AND CHALLENGES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- Fayose, F, Arowolo, M, Olajide, A., Adewale, D, DESIGN AND PRELIMINARY TESTING OF A SMALL-SCALE CASHEW HARVESTER , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 2 (2023): FUTA Journal of Engineering and Engineering Technology
- Ojo Oluwole Timothy , 2Adeniji Toyosi Adelowokan, DEVELOPMENT OF A BIOMETRIC, FACIAL RECOGNITION AND AUTHENTICATION SYSTEM FOR CLASS ATTENDANCE MANAGEMENT , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- A. A. Akinlabi, A. P. Faluyi, J. M. Iberedem, F. M. Dahunsi, INTERNLY: A MOBILE PLATFORM FOR CONNECTING NIGERIAN STUDENTS TO INTERNSHIP OPPORTUNITIES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- SOYOYE Babatunde Oluwamayokun, FALAYI Folayan Richard, OGUNJIMI Jumoke Omowumi, OLORUNFEMI Emmanuel Olasunkanmi, DEVELOPMENT AND PERFORMANCE EVALUATION OF A MOTORIZED BATTERY-POWERED SPRAYER , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- Olatunji Oladimeji Ojo, Taban Emel, ASSESSMENT OF EFFECTIVE NUGGET SIZE, NUGGET ROTATION AND FAILURE MODE OF FRICTION STIR SPOT WELDS OF AA2219-O ALLOY , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- Ikem, I.A., Akintunde, M. A, Titiladunayo, I. F, Awatt.E, INVESTIGATING THE THERMODYNAMIC CHARACTERISTICS OF ENERGY SAVING REFRIGERATING SYSTEM WITH COLD ACCUMULATOR , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 2 (2025): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.