COMPRESSIVE STRENGTH OF TERMITE MOUND AND LIME BLENDED CEMENT MORTAR SUBJECTED TO ACIDIC ENVIRONMENT
- Authors
-
-
Olaniyi Alake
Federal University of Technology Akure, Ondo State, Nigeria.
-
- Keywords:
- Array, Array, Array, Array, Array
- Abstract
-
This study investigated the compressive strength of 50 x 50 x 50 mm termite mound cement and sand mortar made from mixes containing lime,. Mix ratios (1:4 and 1:6) and percentage replacements of cement with lime and termite mound in the order of 0%, 10%, 20%, 30%, 40%, and 50% were used. A total of 360 cubes were cast and cured in water. The specimens were also cured in 1% and 3% solution of tetraoxosulphate vi and trioxonitrate v acid for a period of 7, 14, 21, 28 and 56 days using water binder ratio of 0.65. Test results revealed that the compressive strength of the mortar cubes increases with age but decreases with increasing percentage replacement of cement with lime and termite mound when cured in water while the compressive strength decreases with age and decreases with increasing percentage replacement of cement with lime and termite mound for the specimens cured in acid. The compressive strength of the sample cured in tetraoxosulphate vi acid (H2SO4) is higher than that of trioxonitrate v acid (HNO3).
- Author Biography
- References
-
Adegoke, C.O. and Ajayi, J.A., (2003). Manufacturing and Industrial Capacity Building in
Nigeria: Imperative of Appropriate Technology, Proceedings of National Engineering
Conference on the Engineer in the Nigerian Society, NSE, 8th – 12th Dec., 2003, Ibadan, 67
– 71.
American Society for Testing and Materials, ASTM C39/C39M-01 (2001). Standard Test
Method for Compressive Strength of Concrete Cube Specimens. Annual Book of ASTM
Standards, vol. 04.02, Philadephia, 18-22.
Bassel, H., Nasim, S. and Hassan, K. (2012). Improving Durability of Concrete to Phosphoric
Acid Attack. Jordan Journal of Civil Engineering, 6(1).81-83
Standard Institution (1997). Test for Mechanical and Physical Properties of Aggregates, BS EN
1097: Parts 1-3, London, BSI.
British Standard Institution (2000). Cement- Composition, Specifications and Conformity
Criteria for Common Cements, BS EN 197: Part 1, London, British Standard Institution (BSI).
British Standard Institution (2000) Testing of Hardened Concrete - Shape, Dimension and other
Requirement for Specimens and Mould, BS EN 12390: Part 1, London, BSI.
British Standard Institution (2002) Testing of Hardened Concrete - Compressive Strength Test
Specimens, BS EN 12390: Part 3, London, BSI.
Chang, Z.S. Xiu J.M. Munn, R. and Marosszeky, M. (2005). Using limestone aggregates and
different cements for enhancing the resistance of concrete to sulphuric acid attack. Cement
Concrete Research, 35 (8): 1486-1494.
Justness, H., Elfgreen, L. and Ronin, V. (2005). Mechanism for Performance of
Energetically Modified Cement Versus Corresponding Blended Cement, Cement and
Concrete Research, 35: 315 – 323.
Lasisi, F., Osunade, J.A. and Adewale, A.O. (1990). Short-Term Studies of the Durability of
Laterize Concrete and Laterized-Cement Mortars. Building and Environment. 25(1): 77-83.
Olusola, K. O. and Adesanya, D. A. (2004). Public Acceptability and Evaluation of Local
Building Materials for Housing Construction in Nigeria, Journal of Property Research and
Construction, 1 (1): 83-98.
Olusola, K. O. (2005), Factors Affecting Compressive Strength and Elastic Properties of
Laterized Concrete, Unpublished Ph.D. Thesis, Department of Building, Obafemi
Awolowo University, Ile-Ife.
Olusola, K. O., Olanipekun, E. A., Ata, O and Olateju, O.T. (2006). Studies on Termite Hill and
Lime as Partial Replacement for Cement in Plastering, Building and Environment, 41: 302
– 306.
Pekmezei, B. Y. and Akyuz, S. (2004). Optimum Usage of a Natural Pozzolan for the
Maximum Compressive Strength of Concrete, Cement and Concrete Research, 34: 2175 –
2179.
Syagga, P. M., Kamau, S. N., Waswa-Sabuni, B. and Dulo, S. O. (2001). Potentials of Using
Waste Burnt Clay as a Pozzolanic Material in Kenya, Journal of Discovery and Innovation,
13: 114 -118.
- Downloads
- Published
- 2022-05-30
- Section
- Articles
- License
-
Copyright (c) 2022 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- O.O. Ojo,, B.V. Eyiowuawi,, J.F. Akinfolarin,, MECHANICAL AND MORPHOLOGICAL FEATURES OF MICROWAVE HYBRID HEATING-INDUCED WELDING OF SS304 STAINLESS STEEL WITH COKE AS A SUSCEPTOR , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 2 (2015): FUTA Journal of Engineering and Engineering Technology
- Ojo, O.O., Eyiowuawi, B.V., Akinfolarin, J.F., MECHANICAL AND MORPHOLOGICAL FEATURES OF MICROWAVE HYBRID HEATING-INDUCED WELDING OF SS304 STAINLESS STEEL WITH COKE AS A SUSCEPTOR , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 2 (2025): FUTA Journal of Engineering and Engineering Technology
- Oyeleye M. O. , Aminu A. k, EVALUATION OF LIGHTNING PROTECTION OF A SOUTH WEST NIGERIA UNIVERSITY LIBRARY EDIFICE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- D. T. Oloruntoba, S. O. Seidu, Effect of Mill Scale Particulate in Sand Mould on the Microstructure and Mechanical Properties of Cast 6063 Aluminium Alloys , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 2 (2014): FUTA Journal of Engineering and Engineering Technology
- I O OLADELE, O O DARAMOLA, A M OKORO, J A OMOTOYINBO, EVALUATION OF THE EFFECT OF MERCERIZED WHITE CHICKEN FEATHER FIBRES ON THE MECHANICAL , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- Ijagbemi, C.O, Olabanji, O. M, Ashiru, A.R, Abdulmumuni, B, IJagbemi F.M, DEVELOPMENT OF ETHANOL GEL COOK STOVE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- Aderinola, O.S, Ata, G.O, ENHANCING ASPHALT PAVEMENT PERFORMANCE THROUGH PALM KERNEL SHELLS (PKS) INTEGRATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- E I BELLO, F I OTU, T I OGEDENGBE, L LAJIDE, PERFORMANCE EVALUATION OF RUBBER SEED OIL BIODIESEL , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 2 (2018): FUTA Journal of Engineering and Engineering Technology
- P. A. Adesida, W. A. Salawudeen, ASSESSMENT OF THE INFLUENCE OF MECHANICAL PROPERTIES AND MINERALOGICAL COMPOSITION ON FRAGMENTATION OF SELECTED GRANITIC ROCKS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 1 (2026): FUTA Journal of Engineering and Engineering Technology
- Ajaka E. Oyedele, Alabi O. Oladunni , Omotehinse O. Adeyinka , Minimizing Losses, Socio-environmental Problems and Operational Difficulties in the Activities of Artisanal and Small-scale Gold Mining in Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.
