COMPRESSIVE STRENGTH OF TERMITE MOUND AND LIME BLENDED CEMENT MORTAR SUBJECTED TO ACIDIC ENVIRONMENT
- Authors
-
-
Olaniyi Alake
Federal University of Technology Akure, Ondo State, Nigeria.
-
- Keywords:
- Array, Array, Array, Array, Array
- Abstract
-
This study investigated the compressive strength of 50 x 50 x 50 mm termite mound cement and sand mortar made from mixes containing lime,. Mix ratios (1:4 and 1:6) and percentage replacements of cement with lime and termite mound in the order of 0%, 10%, 20%, 30%, 40%, and 50% were used. A total of 360 cubes were cast and cured in water. The specimens were also cured in 1% and 3% solution of tetraoxosulphate vi and trioxonitrate v acid for a period of 7, 14, 21, 28 and 56 days using water binder ratio of 0.65. Test results revealed that the compressive strength of the mortar cubes increases with age but decreases with increasing percentage replacement of cement with lime and termite mound when cured in water while the compressive strength decreases with age and decreases with increasing percentage replacement of cement with lime and termite mound for the specimens cured in acid. The compressive strength of the sample cured in tetraoxosulphate vi acid (H2SO4) is higher than that of trioxonitrate v acid (HNO3).
- Author Biography
- References
-
Adegoke, C.O. and Ajayi, J.A., (2003). Manufacturing and Industrial Capacity Building in
Nigeria: Imperative of Appropriate Technology, Proceedings of National Engineering
Conference on the Engineer in the Nigerian Society, NSE, 8th – 12th Dec., 2003, Ibadan, 67
– 71.
American Society for Testing and Materials, ASTM C39/C39M-01 (2001). Standard Test
Method for Compressive Strength of Concrete Cube Specimens. Annual Book of ASTM
Standards, vol. 04.02, Philadephia, 18-22.
Bassel, H., Nasim, S. and Hassan, K. (2012). Improving Durability of Concrete to Phosphoric
Acid Attack. Jordan Journal of Civil Engineering, 6(1).81-83
Standard Institution (1997). Test for Mechanical and Physical Properties of Aggregates, BS EN
1097: Parts 1-3, London, BSI.
British Standard Institution (2000). Cement- Composition, Specifications and Conformity
Criteria for Common Cements, BS EN 197: Part 1, London, British Standard Institution (BSI).
British Standard Institution (2000) Testing of Hardened Concrete - Shape, Dimension and other
Requirement for Specimens and Mould, BS EN 12390: Part 1, London, BSI.
British Standard Institution (2002) Testing of Hardened Concrete - Compressive Strength Test
Specimens, BS EN 12390: Part 3, London, BSI.
Chang, Z.S. Xiu J.M. Munn, R. and Marosszeky, M. (2005). Using limestone aggregates and
different cements for enhancing the resistance of concrete to sulphuric acid attack. Cement
Concrete Research, 35 (8): 1486-1494.
Justness, H., Elfgreen, L. and Ronin, V. (2005). Mechanism for Performance of
Energetically Modified Cement Versus Corresponding Blended Cement, Cement and
Concrete Research, 35: 315 – 323.
Lasisi, F., Osunade, J.A. and Adewale, A.O. (1990). Short-Term Studies of the Durability of
Laterize Concrete and Laterized-Cement Mortars. Building and Environment. 25(1): 77-83.
Olusola, K. O. and Adesanya, D. A. (2004). Public Acceptability and Evaluation of Local
Building Materials for Housing Construction in Nigeria, Journal of Property Research and
Construction, 1 (1): 83-98.
Olusola, K. O. (2005), Factors Affecting Compressive Strength and Elastic Properties of
Laterized Concrete, Unpublished Ph.D. Thesis, Department of Building, Obafemi
Awolowo University, Ile-Ife.
Olusola, K. O., Olanipekun, E. A., Ata, O and Olateju, O.T. (2006). Studies on Termite Hill and
Lime as Partial Replacement for Cement in Plastering, Building and Environment, 41: 302
– 306.
Pekmezei, B. Y. and Akyuz, S. (2004). Optimum Usage of a Natural Pozzolan for the
Maximum Compressive Strength of Concrete, Cement and Concrete Research, 34: 2175 –
2179.
Syagga, P. M., Kamau, S. N., Waswa-Sabuni, B. and Dulo, S. O. (2001). Potentials of Using
Waste Burnt Clay as a Pozzolanic Material in Kenya, Journal of Discovery and Innovation,
13: 114 -118.
- Downloads
- Published
- 2022-05-30
- Section
- Articles
- License
-
Copyright (c) 2022 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- O P FAPETU, A O AKINOLA, L L LAJIDE, A B OSASONA, PHYSICOCHEMICAL CHARACTERISTICS STUDY OF OIL EXTRACTED FROM RAFFIA PALM SEED , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- O. O. Awopetu, Effect of Rake Face Reinforcement on Cutting Tool Life of Cemented Carbide Tools during Turning of a-Titanium Alloy , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 1 (2017): FUTA Journal of Engineering and Engineering Technology
- Michael Emoekpere, Olayide R. Adetunji, Femi T. Owoeye, Koya, Abisoye, K., Adewale, T. Samuel, IN VITRO STUDY OF DIFFERENT SAMPLES OF 316 STAINLESS STEEL AS ORTHOPAEDIC BIOCOMPATIBLE MATERIALS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 1 (2026): FUTA Journal of Engineering and Engineering Technology
- S. A. Alabi, I. A. Arighaye, J. O. Afolayan, PROGRESSIVE FAILURE ANALYSIS OF MULTI-STOREY REINFORCED CONCRETE BUILDINGS UNDER DIFFERENTIAL SETTLEMENT , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 1 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- B. V. Omidiji, H. A. Owolabi, A. A. Oyenuga, A. A. Adeleke, Development of Chicken De-Feathering Machine , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 1 (2014): FUTA Journal of Engineering and Engineering Technology
- M. O. Oyeleye, T. O. Ale, Foundational Steel Reinforcement Earthing Evaluation: Case of Ogomudia Electrical/Electronics Laboratory Building Extension, Federal University Of Technology, Akure , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- S. O. Balogun, S. A. Yaro, M. Abdulwahab, A. Kasim, PRODUCTION AND CHARACTERIZATION OF ALUMINA NANOPARTICLES FROM GIRO CLAY VIA ACID LEACHING WITH SOL GEL METHOD , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 1 (2021): FUTA Journal of Engineering and Engineering Technology
- S. S. Yaru, POLLUTION OF VEHICULAR EMISSION ANALYSIS AT FEDERAL UNIVERSITY OF TECHNOLOGY AKURE NORTH GATE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 1 (2021): FUTA Journal of Engineering and Engineering Technology
- I. O. Oladele, O. G. Agbabiaka, A. S. Ogunbadejo, M. A. Okoro, Assessment of Mechanical Properties of Hybrid Composites Based on Polypropylene and Vegetable Fibers , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 2 (2015): FUTA Journal of Engineering and Engineering Technology
- Oluwole Timothy Ojo, FINITE ELEMENT ANALYSIS OF REDESIGNED PIPE-WRENCH FOR OILFIELD SERVICING , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.
