DESIGN AND SIMULATION OF A PICO HYDROELECTRIC TURBINE SYSTEM

Authors

  • Mogaji, T. S

    Federal University of Technology, P. M. B. 704, Akure, Ondo State, Nigeria.

  • Fasasi, S. T

    Federal University of Technology, P. M. B. 704, Akure, Ondo State, Nigeria.

  • Ogundairo, A. O

    Federal University of Technology, P. M. B. 704, Akure, Ondo State, Nigeria

  • Oluwagbemi, I. A

    Federal University of Technology, P. M. B. 704, Akure, Ondo State, Nigeria

DOI:
https://doi.org/10.51459/futajeet.2022.16.1.684
Keywords:
Array, Array, Array, Array, Array
Abstract

Hydroelectric power is both an efficient and reliable form of a clean source of renewable energy. It can be an excellent method of harnessing renewable energy from small rivers and streams. A Pico hydroelectric power system of a cross-flow turbine type is designed and simulated in this study. Model parameters such as runner diameter, runner length, blade spacing, radius of blade curvature, shaft diameter, water jet thickness, turbine speed, turbine power and the number of blades that play major role to achieve the turbine maximum efficiency were determined theoretically. The designed Hydro-electric power system's maximum efficiency was estimated to be 87% with a head of 6390 mm at a flow rate of 0.089 m3/s. Numerically, analysis of the designed power generation system was carried out using (structural analysis and design) STAAD pro connect software and ANSYS tool. The performance evaluation results using the STAAD pro software for the system water reservoir sitting stanchion simulation indicated that the stanchion will not fail while carrying the load. Similarly, the numerical analysis of the designed cross-flow turbine type in this work using the ANSYS tool revealed that the shaft will be able to withstand deformation due to torsion when subjected to a maximum torque of 51.46 Nm. Hence the designed hydroelectric power system will be efficient to produce a 5 kVA electrical power                                     

                                                       

                                                                                  

                                                                                  

Author Biographies
  1. Mogaji, T. S, Federal University of Technology, P. M. B. 704, Akure, Ondo State, Nigeria.

    Department of Mechanical Engineering, School of Engineering and Engineering Technology

  2. Fasasi, S. T, Federal University of Technology, P. M. B. 704, Akure, Ondo State, Nigeria.

    Department of Mechanical Engineering, School of Engineering and Engineering Technology

  3. Ogundairo, A. O, Federal University of Technology, P. M. B. 704, Akure, Ondo State, Nigeria

    Department of Mechanical Engineering, School of Engineering and Engineering Technology

  4. Oluwagbemi, I. A, Federal University of Technology, P. M. B. 704, Akure, Ondo State, Nigeria

    Department of Mechanical Engineering, School of Engineering and Engineering Technology

References

Abubeker, N. G. (2018). Design and Simulation of cross flow turbine on Huluka river in Ethiopia. International Journal of Advance Engineering and Research Development, 5 (3):1007-1017.

Adejumobi, I. A. and Adebisi, O. I. (2011). Exploring Small Hydropower Potentials for Domestic and Information Communication Technology Infrastructural Application in Rural Communities in Nigeria. Proceeding of the 12th Biennial International Conference of Botswana Institution of Engineers, Gaborone, Botswana, 19-26.

Akerkar, B. P. (1989). A Study of the Performance of the Crossflow Turbine, M. S. Thesis, Clemson University, Clemson, SC.

Alie, W. D. (2016). Design and Analysis of Small Hydro Power for Rural Electrification. Global Journal of Researches in Engineering:

Electrical and Electronics Engineering, 16(6): 25-45.

Anyaka, B. O. (2013), Small Hydropower Projects for Rural Electrification in Nigeria: A Developer's Perspective, International Journal of Innovative Technology and Exploring Engineering 3 (5): 29-34.

Bilal, A. N. (2013). Design of Micro - Hydro - Electric Power Station, International Journal of Engineering and Advanced Technology, 2(5): 39-47

Chattha, J. A., Khan M.S., Iftekhar H. and Shanid S. (2014). Standardization of Cross Flow Turbine for Typical Micro-hydro Site Conditions in Pakistan, Proceedings of the ASME 2014 power conference.

David K.O. (2013). Review of Small Hydropower Technology, Renewable Sustainable Energy Review. 26: 515 – 520.

Walseth, E. C. (2009). Investigation of the Flow through the Runner of a Cross-Flow Turbine, Master of Science in Product Design and Manufacturing, Norwegian University of Science and Technology, Department of E n e rg y a n d P r o c e s s E n g i n e e r i n g . Unpublished.

Fraenkel, P., Paish, O., Bokalders, V., Harvey, A., and Brown, A., (1991). Edwards R. Micro-Hydro Power: a guide for development workers. London. Russell PressLtd.,Nottingham.

Gutu, B. O. and Auch, V., R. (2017). Design and Computational Fluid Dynamic Simulation Study of High Efficiency Cross Flow Hydro-power Turbine. International Journal of Science, Technology and Society. 5(4): 120-125.

IRENA (2012) Renewable Energy Technologies: Cost Analysis Series Volume, Power Sector Issue3/5https://www.irena.org/documentdow nloads/publications/re_technologies_cost_an alysis-hydropower.pdf

Mrudang P. and Nirav, O. (2016). Design and Analysis of High Efficiency Cross- Flow Turbine for Hydro-Power Plant, International Journal of Engineering and Advanced Technology, 5 (4):187-193

Razak, J. A. (2010). Application of Cross-Flow Turbine in Off-grid Pico-hydro Renewable Energy Systems, Proceeding of the American-Math 10 Conference on Applied Mathematics, 519-526.

Cover Image
Downloads
Published
2026-09-04
Issue
Vol. 16 No. 1 (2022): FUTA Journal of Engineering and Engineering Technology
Section
Articles
License

Copyright (c) 2022 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Copyright

With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.

How to Cite

DESIGN AND SIMULATION OF A PICO HYDROELECTRIC TURBINE SYSTEM. (2026). FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY, 16(1), 132-139. https://doi.org/10.51459/futajeet.2022.16.1.684

Similar Articles

121-130 of 153

You may also start an advanced similarity search for this article.