DEVELOPMENT OF A DOMESTIC WATER MEDIUM RICE DE-STONING MACHINE

Authors

  • Stanley, B. D

    Federal University of Technology, Akure, Nigeria

  • Oke, P. K.

    Akure, Ondo State, Nigeria

DOI:
https://doi.org/10.51459/futajeet.2022.16.2.694
Keywords:
Array, Array, Array
Abstract

It has become critical to build a de-stoning machine that can be used in our homes whenever we need it. As a result, the goal of this research was to develop and build a wet-method household rice destoning equipment. The design was built utilizing locally accessible materials and was based on the notion of material separation using water as a medium of separation. A reservoir, hopper, de-stoning chamber, washing chamber, impeller, water filter, and brush drum make up the machine. The produced machine was powered by a 1 horsepower variable electric motor that communicated the rotating motion of the driving pulley to the driven pulley, which was supported by bearings, through a V-belt. The machine was built and tested, and it was discovered that 2kg/10minutes and 20.04kg/hour of processed rice were destoned at a de-stoning speed of 400rpm, which is the optimal speed for maximum speed separation. The destoning machine's effectiveness in terms of stone removal is approximately approaching 100 percent free of impurities, making it ideal for residential usage. This discovery elucidates the potential to deal with the challenges of stone removal from locally produced rice using hand and manual method, which are inefficient, time and energy wastage, it acts as a rice processing industry innovation.

 

 

 

 
Author Biographies
  1. Stanley, B. D, Federal University of Technology, Akure, Nigeria

    Department of Mechanical Engineering, School of Engineering and Engineering Technology

  2. Oke, P. K., Akure, Ondo State, Nigeria

    Engineering Materials Development Institute

References

Adegun, I. K., Adepoju, S. A., and Aweda J. A. (2012). A Mini Rice Processing Machine for Nigerian Farmers. Journal of Agricultural Technology. 8(4):1207–1216

Adejuyigbe, S. B. and Bolaji, B. O. (2005). Design, Fabrication and Performance Evaluation of Bean De-huller. Journal of Science and Technology. 25 (1):125–132

Adejuyigbe, S. B. and Bolaji, B. O. (2012). Development and Performance Evaluation of a Rice Destoning Machine using Vibrating Sieves. Journal of Natural Science, Engineering and Technology Agricultural Mechanization in Asia, Africa and Latin America. 11(2):94-105.

Adetola, O. and Akindahunsi, D. (2020). Journal of Engineering Research and Reports pp 1-11.

Agidi, G., Ndagi, B., Kuku, A. M., and Abdullahi L. (2015). Development and Testing of a Rice Destoning Machine. International Journal Engineering. Resources & Science & Technology.4 (3); 1-12.

Bhagirath, S. C., Khawar J., and Gulshan, M. (2017). Text book on Rice Production Worldwide, Spring International Publishing AG.

Erhie, E. (2018) Boosting rice production through increased mechanization. Lagos. Available at: www.pwc.com/ng

Eric, O., Franklin, D.J. and Holbrook. L.H. (1982), Machinery handbook, 21st edition, industrial press Inc., New York. p. 24-26.

Fadeyibi A., Osunde Z. D., Ussaini M. S., Idah P. A., and Balami A. A. (2012). Evaluating Monolayer Moisture Content of Rubber Seed using BET and GAB sorption equations. International Journal of Farming and Allied Sciences.4 (3):72-76.

Food and Agricultural Organization (FAO). (2011). Food and Agriculture Organization Statistical Data Base, Rome. Available at: http.fao.org.

Food and Agriculture Organization (FAO 2010). Henderson, S. M. and Perry, R. L. (1976). Agricultural Process Engineering, 3rd Edition. The Avi Publishing Company, Incorporated, West – Port, Connecticut. p. 170–189

Ikponmwosa, I. O. (2020) Design and Construction of an Electrically Operated Paint Mixing Machine. Journal of Engineering Research and Reports 14(3):20-29.

International Rice Research Institute (IRRI). (2010). World Rice Statistics. Available at: http://beta.irri.org/solutions/index.php.

Khurmi, R. S. and Gupter, J. K. (2005). Machine Design, 14th Edition. New Delhi: Eurasia (PVT) Ltd, p. 511-512 and 686- 689.

Masser, M. P. and Jensen, J. W. (1991). Calculating Area and Volume of Ponds and Tanks. SRAC Publication 103 p. 1-8

Mohammed, D. T. (2016). Introduction of Faro-52 (WITA-4) Rice Variety as a Measure of Solving Low Yield Problem among Farmers in Yola-North Local Government Area of Adamawa State, Nigeria. International Journal of Innovative Agriculture and Biology Research. 4 (2):1–7.

Mohammed, G. Y., Adesina, F, Kamil, K. K. and Ucheoma O.C. (2017). Performance Evaluation and Modification of an Existing Rice De-stoner. Department of Food, Agricultural and Biological Engineering, College of Engineering and Technology, Kwara State University, Malete, P. M. B.

1530, Ilorin, Kwara State, Nigeria. International Journal of Engineering Technologies. 3 (3):169–175.

Nathan, W. and Bonnie, L. (2022), Rice outlook Economic Research Service (RSC-22C, USDA).

Ogunlowo, A. S., Adesuyi, S. A. A Low-Cost Rice Cleaning and De- stoning Machine. Agricultural Mechanization in Asia, Africa and Latin America. 30 (1):20-24.

Ogunlowo, A. S. and Adesuyi, A. S. (2019). A Low Cost Rice Cleaning/Destoning Machine. Published by European Centre for Research Training and Development UK. 2(2); 33-43.

Ojediran, J. O., Okonkwo, C. E., Okunola, A. A. and Alake, A. S. (2019). Development of a Motorized Rice De-stoning Machine. Department of Agricultural and Bio Systems Engineering, Landmark University, Omu-Aran, Kwara State, Nigeria. CIGR Journal. 20:4; 10-20.

Okunola, A. A., Igbeka, J. C. and Arisoyin A. G. (2015). Development and Evaluation of a Cereal Cleaner. Journal of Multidisciplinary Engineering Science and Technology. 2 (6):14-19.

Oludare, A. O. (2014). Analysis of the Efficiency of Mechanized and Non-Mechanized Rice Production in Kaduna State, Nigeria.

Seck, P. A. (2012) 'Crops that Feed the World, Rice and Food Security, 4, pp. 7–24.

Simonyan, K. S., Emordi, I. S. and Adama, J. C. (2010). Development of a Locally Designed Rice Destoning Machine. Journal of Agricultural Engineering and Technology (JAET). 18(2); 1-12.

Terungwa, T. I. and Yuguda, M. A. (2014). The Impact of Rice Production, Consumption and Importation in Nigeria. The political Economy Perspective International Journal of Sustainable Development and World Policy 3(4); 90-99.

United States Department of Agriculture and Foreign Agricultural Services (USDA and FAS, 2010).

Usman, M., Balogun. A. L. and Oyebanre, O. D. (2018). Design, Fabrication and Testing of a Rice Destoning Machine. International Conference of Science, Engineering and Technology. 3(1):1-12.

Von, B. and Kole, C. (2006). Cereals and Millets schnell und portofrei erhältlich bei'. Available at:http://www.beckshop.de/fachb uc h/ l eseprobe/ 9783540340317_Excerpt_ 001.pdf

William, L.A. (1953). Mechanical Power Transmission Manual Conover - Mast Publ. New York. NY, USA. p. 165-174.

Cover Image
Downloads
Published
2026-09-07
Issue
Vol. 16 No. 2 (2022): FUTA Journal of Engineering and Engineering Technology
Section
Articles
License

Copyright (c) 2022 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Copyright

With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.

How to Cite

DEVELOPMENT OF A DOMESTIC WATER MEDIUM RICE DE-STONING MACHINE. (2026). FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY, 16(2), 40-48. https://doi.org/10.51459/futajeet.2022.16.2.694

Similar Articles

1-10 of 97

You may also start an advanced similarity search for this article.