STATIC STRUCTURALANALYSIS OF A DESIGNED WIND TURBINE MODEL
- Authors
-
-
Samuel, M
Nigerian Defence Academy, Kaduna, Nigeria
-
Muhammad, S. U
Nigerian Defence Academy, Kaduna, Nigeria
-
Solomon W. C
Nigerian Defence Academy, Kaduna, Nigeria
-
Japheth, G. C
Nigerian Defence Academy, Kaduna, Nigeria
-
- Keywords:
- Array, Array, Array, Array, Array, Array
- Abstract
-
Awind turbine is a machine which converts the power in the wind into electricity using the aerodynamic force of lift
to rotate a shaft which in turn helps in the conversion of mechanical power to electricity by means of a generator. It
is subjected to varying wind loads while in operation under different environmental conditions. In this paper, the
structural analysis of a proposed model for scale assessment of 5 MW wind farm in Kaduna using Nigerian Defense
Academy (NDA) as a case study was investigated. The design and assembly of the wind turbine components were
done with the help of SolidWorks 2018 and the analyses were done in ANSYS 15.0 by constraining the model and
applying equivalent environmental wind load on it. The designed turbine is made by different type of component
materials such as i.e., cast alloy steel as the base, chromium stainless steel as the bearing, aluminum 2024 T361 as
the blade, copper as the rotor, cast alloy steel as the housing, alloy steel as the tower and shaft. Alloy steel has a
good strength but it contributes more weight to the turbine. The result showed that the maximum stress of the wind
turbine structure is 33.80 MPa under maximum wind load of 120 N acting on the turbine which is lower than the
yield strength of the turbine materials ranging from 241.28 MPa to 620.40 MPa. The tower, base and the blades are
the most components of the system with the stress concentration. - Author Biographies
- References
-
Aji, M. M., Gutti, B, Highina, B. K., and Hussaini, M. A (2015). Challenges of Energy Sustainability in Nigeria as a Developing Nation and the Way Forward, Applied Research Journal, 1(2), 46-50.
Gizachew, D. and Belete, S. (2019). Design and Analysis of 2MW Horizontal Axis Wind Turbine Blade.International Journal of Innovative Science, Engineering & Technology, 6(5), 23-48.
Iov, F., Blaabjerg, C. Z., Hansen, A. D. and Anca, D. (2002). A New Simulation Platform to Model Optimize and Design Wind Turbines.
International Journal of Electrical Electronic Engineering; Industrial Electronics Society Conference, 1, 88-99.
Manwell, J. F., Mcgowan, J. G and Rogers, A. L. (2009). Wind Energy Explained: Theory, Design and Application.Text book; A John Wiley and Sons Publication, the Atrium, Southern Gate, Chichester West Sussex, P O 19 8SQ, United Kingdom.
Mouhsine, E.I.S., Oukassou, K, Ichenial, M., M, Kharbouch, B. and Hajraoui, A. (2018). Aerodynamics and Structural Analysis of Wind Turbine Blade. 11th International Conference Intelisaplinarity in Engineering, Procedia Manufactory, 22, 747 -756.
Ohunakin, O. S. (2010) Energy Utilization and Renewable Energy Sources in Nigeria. Journal of Engineering and Applied Science, 17(5), 1–7.
Okedu., K. E., Uhunmwangho, R. and Promise, W. (2015). Renewable Energy in Nigeria: The Challenges and Opportunities in Mountainous and Riverine Regions. International Journal of Renewable Energy Research, 5(1), 6-22.
Oyedepo, S.O. (2015). Energy and Sustainable Development in Nigeria: the way forward. Energy Sustainability and Society Journal, 2(1), 2-15.
Ozdemir, A., Sermet, F., Tigit, E.M., Arisoy, B. and Ercan, E. (2017). Static Analysis of Different type of Wind Turbine Towers. The International Conference on Wind Energy Harvesting, Coimbra, Portugal, 3-14.
Schmitz, S. (2019). Areodynamics of Wind Turbines; a physical basis for analysis and design Hoboken Wiley.
Youness, Q. (2009). Finite Element Modelling of Wind Turbine; Msc Thesis, School of Engineering, Cranfield
University. Unpublished Thesis.
Zemmouri, F., Chowdhury, S.M., Huque, Z. and Kommalati, R.R. (2018). Static Structural Analysis of a Pointed Tip Wind Turbine Blade using FSI. International Journal of Engineering Sciences, 2 (1), 7 – 12.
Zhang, Z., Yin, Z., Han, T. and Tan, C. C. (2013). Fracture Analysis of Wind Turbine Main Shaft. Engineering Failure Analysis, 34,
129–139.
- Cover Image
-
- Downloads
- Published
- 2026-09-15
- Section
- Articles
- License
-
Copyright (c) 2022 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- I. O. Adejumobi, REVIEW OF CONVOLUTIONAL NEURAL NETWORK MODEL FOR OBJECT DETECTION, LOCALIZATION AND CLASSIFICATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- Oluwafemi Omotayo, Predictive Modelling and Explainability of Metakaolin Concrete Compressive Strength: Benchmarking TabPFN Against Boosted Ensemble and Kernel-Based Algorithms , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 2 (2026): FUTA Journal of Engineering and Engineering Technology
- Oladele, I.O, Akinwekomi, A.D, Ojo, O.O, Bichang’a, D.O, Adelabu S.O, Ezemenike, C. S, Adewumi, V.A, Taiwo, A.S, PARTIALLY REPLACED CEMENT BASED PAPER PARTICLES-WOOD SAW DUST-COCONUT FIBER CMPOSITES FOR LOW LOAD BEARING CAPACITY AND LIGHT-WEIGHT CIVIL CONSTRUCTIONS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- Aderinola, O.S, Ata, G.O, ENHANCING ASPHALT PAVEMENT PERFORMANCE THROUGH PALM KERNEL SHELLS (PKS) INTEGRATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- Faluyi, S. O.,, Amu, O. O., Adetoro, E. A., GEOTECHNICAL PROPERTIES OF LIME AND BAMBOO STEM ASH STABILIZED SOILS FOR ROAD CONSTRUCTION IN SOUTH-WESTERN NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 16 No. 1 (2022): FUTA Journal of Engineering and Engineering Technology
- O.A Olubosede, , K. B Adedeji, , C. S Odeyemi,, T. H Shabangu, , DESIGN AND IMPLEMENTATION OF A PID CONTROL FOR A DC MOTOR-DRIVEN BELT CONVEYOR SYSTEM , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 2 (2025): FUTA Journal of Engineering and Engineering Technology
- Okewale, I.A, Fasan, J.O, Abiwo, O.O, DEVELOPMENT OF A FLOATING RING OEDOMETER FOR TESTING GEOMATERIALS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- Oluwatoyin Olaseinde, O. Ajanaku, O. M. Ojo, S. O. Seidu, COMPARATIVE STUDY OF THE REINFORCED STEEL BARS OBTAINED FROM A FAILED RESIDENTIAL BUILDING AND THE SHELVES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- Ashiru Mohammed, Ibrahim Aliyu, Hussaini Abdullahi Umar, Aliyu Umar Mani, PERFORMANCE EVALUATION OF RAILWAY BALLAST DEGRADATION USING THE MORPHOLOGICAL PROPERTIES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- Dr. Kayode S. Famuagun, Prof. Tunbosun S. Oni, DAMPING EFFECTS ON THE DYNAMIC BEHAVIOUR OF BEAM-TYPE STRUCTURE WITH CLASSICAL BOUNDARY CONDITIONS UNDER MOVING DISTRIBUTED LOAD , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 2 (2026): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.