PHYSICOCHEMICAL CHARACTERISTICS STUDY OF OIL EXTRACTED FROM RAFFIA PALM SEED
- Authors
-
-
O P FAPETU
1. Department of Mechanical Engineering, The Federal University of Technology Akure, Ondo State. Nigeria.
-
A O AKINOLA
Department of Mechanical Engineering, The Federal University of Technology Akure, Ondo State. Nigeria.
-
L L LAJIDE
2Department of Industrial Chemistry, The Federal University of Technology, Akure, Nigeria
-
A B OSASONA
1. Department of Mechanical Engineering, The Federal University of Technology Akure, Ondo State. Nigeria.
-
- Keywords:
- Array
- Abstract
- The Physicochemical properties of the extracted oil from Raffia palm (Raphia regalis) were investigated. Physical properties such as refractive index, specific gravity, viscosity, moisture content, flash point, smoke point, fire point, pour point and cloud point; and chemical properties such as acid value, free fatty acid, saponification value, unsaponifiable matter, iodine value, ester value and peroxide value were investigated for both raw Raffia oil and transesterified raffia oil. The various properties were investigated using ASTM standard methods and calculations. Results obtained for physical properties: refractive index, specific gravity, viscosity, moisture content, flash point, smoke point, fire point, pour point and cloud point were 1.437, 0.765, 1.420 mm2/sec, 8.0%, 154ºC, 140ºC, 160ºC, -3ºC and -7ºC respectively for the raw Raffia oil, and 1.341, 0.840, 1.21 mm2/sec, 1.6%, 70ºC, 66ºC, 72ºC, -5ºC and -12º for the transesterified raffia oil. Results for the chemical properties: acid value, free fatty acid, saponification value, ester value obtained in (mgKOH/g), iodine value (mgI2/g), peroxide value (mEq/kg) and unsaponifiable matter (%) were determined to be, 18.849, 9.472, 136.043, 117.194, 5.076, 192.000 and 1.814% respectively for the raw Raffia oil; and 31.977, 16.069, 193.545, 161.568, 167.50, 350.800 and 2.481% for the transesterified raffia oil. It was concluded that Raffia oil when processed have great potentials for use as alternative fuel for energy generation.
- References
- Downloads
- Published
- 2019-04-29
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- S. O. Obayopo, F. J. Banjoko, S. A. Balogun, H. B. Adedayo, Investigation into the Use of Blended Sunflower Oil and Superolein in Hydraulic Systems , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 1 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- Akinola, A. O, Olusola, E. O, Olundegun, S. A1, DEVELOPMENT OF A PULVERIZING MACHINE FOR RAPHIA PALM SEEDS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- A. S. Taiwo, I. O. Oladele, O. O. Daramola, A. D. Akinwekomi, O. G. Agbabiaka, Mechanical Wear Resistance and Water Absorption Properties of Particulate Palm Kernel Shell Reinforced Epoxy Composites for Automobile Application , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- Oluseyi Orisadare, Ayodeji S. Olawore, Michael O. Ibiwoye, Eyitayo A. Ponle, Omolola T. Odeyemi, Opeyemi S. Kegbeyale, MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF BRASS REINFORCED WITH COCONUT SHELL ASH POWDER , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- Ijagbemi, C.O, Olabanji, O. M, Ashiru, A.R, Abdulmumuni, B, IJagbemi F.M, DEVELOPMENT OF ETHANOL GEL COOK STOVE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- A. S. Ogbiye, Lucia O. Agashua, Effects of concrete mixing fluid samples - fermented locust beans and sewage on the strength properties of self-healing concrete , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- F. M. Dahunsi, S. O. Oluponna, Analysis of Energy Usage Pattern of a Nigerian University Digital Resource Center (DRC):: FUTA DRC as a Case Study , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- Daso Akindele Wellington, Adewuyi Gideon Akinyemi, Oke Peter Kayode , DEVELOPMENT OF SOLAR CELLS USING ADAPTABLE LOCALLY SOURCED MATERIALS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- A. I. Alao, B. K. Adeoye, U. Nwitte-Eze, ALKALINE EXTRACTION AND QUALITY ASSESSMENT OF PROTEIN ISOLATE FROM ALMOND (Prunus dulcis) SEED , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- W. O. Apena, K. F. Akingbade, Modelling of Electric Power Subsystem for a Weather Balloon Microsatellite , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 1 (2017): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.