DEVELOPMENT OF CHEMICAL PROPORTION FORMULATION MODEL FOR QUALITY CONTROL IN FLEXIBLE POLYURETHANE FOAM PRODUCTION

Authors

  • Kayode Francis Akingbade

    Department of Electrical & Electronics Engineering, The Federal University of Technology, Akure, Ondo State Nigeria.

DOI:
https://doi.org/10.51459/futajeet.2018.12.2.87
Keywords:
Array
Abstract

A major section involved in the production of flexible polyurethane foam (FPF) is the chemical proportion formulation. This section determines the quality of the foam to be produced. Quality control in FPF production cut across this section, as wrong chemical formulation yields a different foam as compared to the desired foam. This work developed a model capable of generating chemical formulation for a specified foam density. Chemical formulations for four different foam densities were obtained and compared with manual real life data obtained from a foam manufacturing industry located in the North Central part of Nigeria. Using a two-sample t-test, the result shows that there is no significant difference between the model result and the real life data. 2-tailed significance of 0.215, 0.088 and 0.124 were obtained for polyol, TDI and water respectively and were seen to be greater than the level of significance (0.05)

References
Cover Image
Futajeet Vol. 12 Issue 2
Downloads
Published
2019-04-28
Issue
Vol. 12 No. 2 (2018): FUTA Journal of Engineering and Engineering Technology
Section
Articles
License

Copyright

With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.

How to Cite

DEVELOPMENT OF CHEMICAL PROPORTION FORMULATION MODEL FOR QUALITY CONTROL IN FLEXIBLE POLYURETHANE FOAM PRODUCTION. (2019). FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY, 12(2), 211-220. https://doi.org/10.51459/futajeet.2018.12.2.87

Similar Articles

61-70 of 104

You may also start an advanced similarity search for this article.