Survey of the Effects of Operational Noise on Quarry Workers in Akoko-Edo Local Government Area of Edo State
- Authors
-
-
D. J. Afu
Department of Mining Engineering, Federal University of Technology Akure, Ondo State, Nigeria.
-
E. O. Ifelola
Department of Mining Engineering, Federal University of Technology Akure, Ondo State, Nigeria
-
S. G. Ayodele
Department of Mineral and Petroleum Resources Engineering, Federal Polytechnic Auchi, Edo State, Nigeria
-
A. Ekun
Department of Mineral and Petroleum Resources Engineering, Federal Polytechnic Auchi, Edo State, Nigeria
-
A. Itunu
Department of Mineral and Petroleum Resources Engineering, Federal Polytechnic Auchi, Edo State, Nigeria
-
- Keywords:
- Noise, Quarry, effects, workers
- Abstract
-
This study employed subjective well structure questionnaires for data collection at three different quarries, namely; The Freedom Group of company, Somak Industry Nigeria Limited and Beez in Akoko Edo Local Government Area of Edo State, Nigeria. 50 questionnaires were distributed to quarry workers for their subjective assessment of the effects of noise on workers without any restrictions. Works at the quarry face and mill processing plants responded quite well. Based on the results obtained from questionnaires analysis using SPSS (Frequency distribution and bar charts), 20% of the workers admitted to a change or deterioration in their hearing ability over time, 48% affirmed that they observe continuous ringing in the ear after work hours, headache after the day's work was a common experience for about 74% of the workers and 24% complained of sleep disorder. In light of these, this study suggested that the effects of noise on the workers would be minimal if the quarry can employ some hearing conservation programs and measures be put in place.
- References
- Downloads
- Published
- 2019-05-05
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- B. V. Omidiji, H. A. Owolabi, T. A. Morakinyo, A. Olukoga, Effects of Machining Parameters on the Surface Roughness of Al-Si alloy , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 2 (2015): FUTA Journal of Engineering and Engineering Technology
- W. A. Raheem, A. O. Ajayeoba, K. A. Adebiyi, O. R. Oyetunji, O. A. Ayeyemi, Ergonomic Evaluation of Base Transceiver Station Maintenance Personnel in Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- Arowojolu, E.O, Oniyide, G.O, AN ECONOMIC COMPARATIVE ANALYSIS OF EQUIPMENT OUTSOURCING AND OUTRIGHT PURCHASE FOR QUARRYING OPERATIONS AT FOUNTAIN COMPANY, AKURE, ONDO STATE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- Y. O. Olasoji, Characterization of Noise in Narrowband Power Line Communications , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 1 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- Amosu, C.O., CONTROLLING MINE WATER IN GOLDEN GIRL QUARRY IN IKPESHI, EDO STATE, NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- A. P. Olalusi, M. S. Obot, A. S. Ogunlowo, Modelling the Dehydration Characteristics of Taro (Colocasia Esculenta) Slices in a Convective Cabinet Dryer , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 1 (2014): FUTA Journal of Engineering and Engineering Technology
- A. O. Owolabi, P. A. Adesida, COST EVALUATION FOR ASPHALT PRODUCTION IN SELECTED QUARRIES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 1 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- C. O. Ijagbemi, D. T. Oloruntoba, A. O. Adeoye, Development of a Bioplastic Film for Food Packaging , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 1 (2014): FUTA Journal of Engineering and Engineering Technology
- A Amoko, S JUSTINAH, A Fehintola, O Ezekiel, I Oke, A Isaiah, EVALUATION OF EFFECTS OF SELECTED FACTORS ON ADSORPTION KINETICS OF LEAD ION REMOVAL FROM AQUEOUS SOLUTIONS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 2 (2018): FUTA Journal of Engineering and Engineering Technology
- O. Hezekiah Adeyemi, B Julius Olorunfemi,, Olasunkanmi O Akinyemi, APPRAISAL OF RELATED RISKS WITH LOCALLY MADE BLOCK MAKING MACHINE: A MULTI-SITE CASE STUDY OF NIGERIA BLOCK MAKING INDUSTRY , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 2 (2018): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.