A NUMERICAL FORMULA AND COST BENEFIT OF GROUNDWATER RECHARGE IN MAIDUGURI, NIGERIA
- Authors
-
-
M. D. IDI
Land, Air and Water Consulting, F6 Ibrahim Taiwo Estate, Baga Road, Maiduguri, Borno State, Nigeria
-
T. A. ALADESANMI
Information Technology and Communications Unit, Obafemi Awolowo University, Ile- Ife, Nigeria
-
S. LUKMAN
Civil Engineering Department, University of Hafr Al-Batin, Hafr Al-Batin, Saudi Arabia
-
M. A. ASANI
4 Department of Urban and Regional Planning, Ladoke Akintola University Technology, Ogbomoso, Nigeria
-
Y. M. USMAN
Department of Agricultural Engineering, Ramat Polyechnic Maiduguri
-
I. A. OKE
Department of Civil and Environmental Engineering, Elizade University, Ilara- Mokin, Nigeria
-
- Keywords:
- Groundwater recharge, soil –moisture, , numerical solution, Microsoft Excel Solver, Maiduguri
- Abstract
-
In this paper, relationship between rainfall and groundwater recharge (GR) was established and evaluated with cost benefit. Rainfall measured in Maiduguri, Nigeria was used to fix the unknown constants of the numerical formula (NF) using Microsoft Excel Solver. The constants were used to establish NF. The NF was used to estimate GR from the rainfall. Accuracy of the NF was evaluated statistically (relative error; the degree of accuracy, numerical reliability, Model of Selection Criterion (MSC) and Akaike Information Criterion (AIC)) and compared with the formulae in use using field GR Uttar Pradesh (UP) method as the reference GR. A basic cost benefit of GR was conducted.
The study revealed that GR using the current models were similar to GR using UP, Chaturvedi, Kumar and Seethapathi and Rao, but different in magnitude of GR. NF provided the lowest relative error of 0.146 %, the highest MSC of 13.436; the degree of accuracy of 99. 854 % and the lowest AIC of 43.348 with Rao formula having highest relative error of 56.56 %, the lowest MSC of 0.96; the degree of accuracy of 43.44 % and the lowest AIC of 1403.43. The present average cost benefit of groundwater recharge in Maiduguri was found to be 619.60US $ m-2Yr-1. It was concluded that GR using the numerical formula is a promising tool for GR with minimum error in water resources management.
- References
- Downloads
- Published
- 2020-11-18
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- M. M. Melodi, O. S. Adekinya, Assessment of Cost Effectiveness of Borehole Drilling in Oyo State, Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 10 No. 1 (2016): FUTA Journal of Engineering and Engineering Technology
- M. A. Akintunde, K A ADETORO, T. J. Abioye, Development of Refrigeration System for Storage and Preservation of Yam Tubers , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- Y. O. Olasoji, Characterization of Noise in Narrowband Power Line Communications , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 1 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- E.O. OLUKANNI, O.J. OYEDEPO, PHYSICO-RHEOLOGICAL CHARACTERIZATION OF POLYMER MODIFIED BITUMEN , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 2 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- O.O. Ojo,, B.V. Eyiowuawi,, J.F. Akinfolarin,, MECHANICAL AND MORPHOLOGICAL FEATURES OF MICROWAVE HYBRID HEATING-INDUCED WELDING OF SS304 STAINLESS STEEL WITH COKE AS A SUSCEPTOR , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 2 (2015): FUTA Journal of Engineering and Engineering Technology
- E. O. Aiyewalehinmi, O. S. Aderinola, M. O. Tanimola, An Investigation into Building Functional Failures in Nigeria (A Case Study of Ibadan, Oyo State Capital) , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 2 (2015): FUTA Journal of Engineering and Engineering Technology
- N S Lawal, A A Babalola, O O Adama, A O Sosanya, A A Adebayo, CHARACTERIZATION OF DIFFERENT CASSAVA EFFLUENTS AND EVALUATION OF PROCESSOR ON-SITE HANDLING TECHNIQUES IN OGUN STATE, NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 2 (2018): FUTA Journal of Engineering and Engineering Technology
- A. A. Ponnle, S. K. Ani, Assessment of Exposure to Indoor Power Frequency Magnetic Fields: SEET Building and Engineering Laboratories, FUTA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- O. Adukwu, E. D. Oku, O. I. Apeh, Bivariate Empirical Modeling of Global System for Mobile-Communication (GSM) Propagation Path Loss in an Undulating Terrain , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 2 (2018): FUTA Journal of Engineering and Engineering Technology
- Adebayo Felix Owa, Daniel Toyin Oloruntoba, Muideen Adebayo Bodude, Fisayo Adesina, INVESTIGATION OF MILD STEEL PROTECTION WITH GLASS WOOL IN CORROSIVE MEDIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 2 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
You may also start an advanced similarity search for this article.