MICROWAVE THIN-LAYER DRYING KINETICS, DIFFUSIVITY, AND ENERGY EFFICIENCY OF MEDICINAL OCIMUM GRATISSIMUM AND VERNONIA AMYGDALINA LEAVES
- Authors
-
-
Oladele, Samouel O.
The Federal University of Technology, Akure, Nigeria
-
- Keywords:
- Thin-layer, microwave-drying, modeling, activation energy, moisture diffusivity
- Abstract
-
Thin-layer microwave drying was applied to highly perishable medicinal herbs, Ocimum gratissimum (scent leaf) and Vernonia amygdalina (bitter leaf), to generate a comprehensive kinetic and energy dataset for these species. Increasing microwave power significantly reduced drying time from 19 minutes to 7 minutes for scent leaf and from 17 minutes to 4 minutes for bitter leaf, thereby avoiding the multi-hour durations required by convective or solar methods. Moisture-ratio curves exhibited only a falling-rate period. Seven thin-layer drying models were evaluated; the Midilli model provided the optimal fit (R² ? 0.990, root mean square error (RMSE) ? 0.030). Effective moisture diffusivity increased by an order of magnitude with applied power, reaching 1.84 × 10?? m² s?¹ for scent leaf and 1.54 × 10?? m² s?¹ for bitter leaf. An Arrhenius-type analysis yielded activation energies of 31.8 W g?¹ and 28.1 W g?¹ for scent leaf and bitter leaf, respectively. Specific energy consumption decreased to 4.09 MJ per kg of water removed (4.09 MJ kg?¹ H?O) at 900 W, while drying efficiency exceeded 97%. These results demonstrate that appropriately selected microwave power levels achieve rapid, energy-efficient dehydration without prolonged thermal exposure, offering a promising preservation approach for nutraceutical herbs in tropical regions. The reported kinetic and diffusivity parameters facilitate scale-up calculations for industrial microwave units targeting bioactive-compound retention.
- Author Biography
- References
-
Akpinar, E. K., Bicer, Y., and Cetinkaya F., (2006). Modelling of thin layer drying of parsley leaves in a convective dryer and under open sun. Journal of Food Engineering, 75, 308–315.
Akpinar, E. K., Sars?lmaz, C., and Yildiz, C., (2004). Mathematical modelling of a thin layer drying of
Alara, O. R., Abdurahman, N. H., Mudalip, S. K. A., and Olalere, O. A. (2018). Mathematical modeling of thin layer drying using open sun and shade of Vernonia amygdalina leaves. Agriculture and Natural Resources, 52(1), 53-58.
Dadali, G., Apar, D. K., and Özbek, B. (2007). Estimation of effective moisture diffusivity of okra for microwave drying. Drying Technology, 25(9), 1445-1450.
Dadali, G., Demirhan, E., and Özbek, B. (2007). Color change kinetics of spinach undergoing microwave drying. Drying Technology, 25(10), 1713-1723.
Dadali, G., Demirhan, E., and Özbek, B. (2007). Microwave heat treatment of spinach: Drying kinetics and effective moisture diffusivity. Drying Technology, 25(10), 1703-1712.
Demirhan, E. and Özbek, B. (2010): Microwave-drying characteristics of basil. Journal of Food Processing and Preservation 34 (3), pp. 476–494. doi: 10.1111/j.1745-4549.2008.00352.x
Gögus, F., and Maskan, M. (1999). Water adsorption and drying characteristics of okra (Hibiscus esculentus L). Drying Technology, 17(4-5), 883-894.
Idris, S., Iyaka, Y. A., Ndamitso, M. M., and Paiko, Y. B. (2011). Nutritional composition of the leaves and stems of Ocimum gratissimum. Journal of Emerging Trends in Engineering and Applied Science, 2(5), 801–805.
Kalinke, I., Röder, J., Unterbuchberger, G., and Kulozik, U. (2025). Microwave-assisted freeze drying: The role of power input and temperature control on energy efficiency and uniformity. Journal of Food Engineering, 390, 112410.
Kusuma, H. S., Izzah, D. N., and Linggajati, I. W. L. (2023). Microwave-assisted drying of Ocimum sanctum leaves: Analysis of moisture content, drying kinetic model, and techno-economics. Applied Food Research, 3(2), 100337.
Maroulis, Z. B., and Saravacos, G. D. (2003). Food Process Design (Vol. 126). CRC Press.
Maskan, M. (2000). Microwave/air and microwave finish drying of banana. Journal of Food Engineering, 44, 71-78.
Mepba, H. D., Eboh, L., and Banigo, D. E. B. (2007). Effects of processing treatments on the nutritive composition and consumer acceptance of some Nigerian edible leafy vegetables. African Journal of Food, Agriculture, Nutrition and Development, 7(1).
Nakra, S., Tripathy, S., and Srivastav, P. P. (2025). Drying as a preservation strategy for medicinal plants: Physicochemical and functional outcomes for food and human health. Phytomedicine Plus, 100762.
Panchariya, P. C., Popovic, D., and Sharma, A. L. (2002). Thin-layer modelling of black tea drying process. Journal of Food Engineering, 52(4), 349-357.
Sacilik, K., Keskin, R., and Elicin, A. K. (2006). Mathematical modelling of solar tunnel drying of thin layer organic tomato. Journal of food Engineering, 73(3), 231-238.
Soysal, Y. (2004). Microwave drying characteristics of parsley. Biosystems Engineering, 89(2), 167-173.
Wang, Z., Sun, J., Chen, F., Liao, X., and Hu, X. (2007). Mathematical modelling on thin layer microwave drying of apple pomace with and without hot air pre-drying. Journal of Food Engineering, 80(2), 536-544.
World Health Organization, WHO (1996). World Health Organization Technical Series: Trace elements in Human Nutrition and Health. World Health Organization Geneva. pp.199 – 205
Zahoor, I., Mir, T. A., Ayoub, W. S., Farooq, S., and Ganaie, T. A. (2023). Recent applications of microwave technology as novel drying of food–review. Food and Humanity, 1, 92-103.
- Downloads
- Published
- 2025-05-30
- Section
- Articles
- License
-
Copyright (c) 2025 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- Samuel Olugbenga Oladele, MODELLING OF THIN-LAYER MICROWAVE DRYING OF BITTER LEAF SAMPLES (Vernonia Amygdalina) FOR PRESERVATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- O. S. Oyerinde, John A. V. Olumurewa, D. Fajobi, DRYING KINETICS OF FISH (Clarias gariepinus) SMOKED WITH BIOGAS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- A. P. Olalusi, M. S. Obot, A. S. Ogunlowo, Modelling the Dehydration Characteristics of Taro (Colocasia Esculenta) Slices in a Convective Cabinet Dryer , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 1 (2014): FUTA Journal of Engineering and Engineering Technology
- A. S. Oyerinde, EFFECT OF DRYING RATE AND MOISTURE REMOVAL ON THE DRYING PROPERTIES OF GROUND AND FERMENTED CASSAVA MASH ("GARI") , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 1 (2021): FUTA Journal of Engineering and Engineering Technology
- O.O. Ojo,, B.V. Eyiowuawi,, J.F. Akinfolarin,, MECHANICAL AND MORPHOLOGICAL FEATURES OF MICROWAVE HYBRID HEATING-INDUCED WELDING OF SS304 STAINLESS STEEL WITH COKE AS A SUSCEPTOR , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 2 (2015): FUTA Journal of Engineering and Engineering Technology
- O.A. ADEMESO, B.I. ADEYEMO, Physical and Mechanical Characteristics of the Conglomeratic Layer in Akure, Southwestern Nigeria. , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 2 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- Raheem, W. A., , Omiyale, A. D, Odeyinka, O. F. , Folorunso, C, A COMPARATIVE ANALYSIS OF PREDICTIVE MODELS FOR HOUSEHOLD ENERGY CONSUMPTION IN LAGOS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 2 (2025): FUTA Journal of Engineering and Engineering Technology
- Ojo, O.O., Eyiowuawi, B.V., Akinfolarin, J.F., MECHANICAL AND MORPHOLOGICAL FEATURES OF MICROWAVE HYBRID HEATING-INDUCED WELDING OF SS304 STAINLESS STEEL WITH COKE AS A SUSCEPTOR , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 2 (2025): FUTA Journal of Engineering and Engineering Technology
- J. A.V. Famurewa, E. T. Faboya, The Effects of Drying Temperature on the Physicochemical Properties of Ogbono (lrvingia Gabonensis) , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 1 (2017): FUTA Journal of Engineering and Engineering Technology
- J. A. Afelumo, O. A. Ademeso, Investigation of the Integrity of Subsoil as Foundation Support for a new Hostel Building, FUT, Akure, Southwestern Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.
