PRODUCTION AND EVALUATION OF BIOMASS BRIQUETTES FROM PALM KERNEL SHELL AND COCONUT HUSK
- Authors
-
-
Dafiewhare, O
Federal University of Technology, Akure, PMB 704, Ondo State, Nigeria
-
Ijagbemi, C. O
Federal University of Technology, Akure, PMB 704, Ondo State, Nigeria.
-
Ologunwa, T. P
Federal University of Technology Akure, Ondo State, Nigeria
-
Alabi, O. T
Federal University of Technology Akure, Ondo State, Nigeria
-
Ijagbemi, A. O
College of Computing and Software Engineering, Kennesaw State University, Kennesaw, GA, USA
-
- Keywords:
- biomass, briquette, palm kernel shell, coconut husk, calorific value
- Abstract
-
This study investigates the production and evaluation of biomass briquettes derived from palm kernel shell (PKS) and coconut husk (CH), with cassava starch as a binder. The raw materials were carbonized at 400°C for PKS and 250°C for CH, mixed in different ratios, and compressed into briquettes. Five samples (A–E) were formulated and evaluated based on their physical and combustion properties. Parameters such as density, moisture content, volatile matter, ash content, fixed carbon, and calorific value were analyzed. Among the samples, Sample D (20% PKS, 70% CH, 10% binder) exhibited the highest calorific value of 465.28 J/g, making it the most efficient formulation. This research demonstrates the potential of agro-waste briquettes as a sustainable alternative energy source for domestic use.
- Author Biographies
- References
-
Adeniyi, O. D., Farouk, A., Adeniyi, M. I., Auta, M., Olutoye, M. A. and Olarewaju, S. Y. (2014), Briquetting of Palm Kernel Shell Biochar Obtained Via Mild Pyrolytic Process. Lautech Journal of Engineering and Technology, 8(2), 30–34.
Agbaeze, E. K. and Abner, I. P. (2018), Oil Subsidy Management and Performance of The Nigerian Economy. International Research Journal of Finance and Economics, 111–116.
Akintunde, M. A., Ogunleye, S. T. and Alade, M. A. (2020). Comparative Evaluation of Biomass Briquettes from Cassava Peels and Sawdust. International Journal of Renewable Energy Studies, 8(1), 91–104.
AOAC (2000). Official Methods of Analysis. 17th Ed., Association of Official Analytical Chemists, Gaithersburg, Maryland.
Aris, M. S., Hassan, S., Mamat, O. and Sabil, K. (2005), Development of Fuel Briquettes from Oil Palm Wastes, WIT Transactions on Ecology and the Environment, 1, 641–649.
Ayodeji, O. M. (2019). Renewable Energy Development in Nigeria: Status and Prospects. Nigerian Journal of Renewable Energy, 12(1), 45–52
.
Azrine, A., Juferi, I., Nurzawani, S., Rafidah, H. and Hazman, S. (2022), Coconut Shell and Husk Biochar: A Review of Production and Activation Technology, Economic, Financial Aspect and Application. Waste Management and Research,41(1), 37–51.
Baffour-Awuah, E., Akinlabi, S. A., Jen, T. C., Hassan, S., Okokpujie, I. P., Ishola, F. (2021). Characteristics of Palm Kernel Shell and Palm Kernel Shell-Polymer Composites: A Review. International Conference on Engineering for Sustainable World, 1107–1119.
Balami, A. A., Chukwu, O., Gbabo, A. and Idris, R. D. (2014), Determination of Some Engineering Properties of Cassava Tubers Grown in Northern Nigeria. Lautech Journal of Engineering and Technology ,8(2), 35 – 39.
Betty, O. B., Mohammed, T. and Jones, M. (2020), Research Article Preparation of Charcoal Briquette from Palm Kernel Shells: Case Study in Ghana. Heliyon, 6, 23 – 35.
Edmund, C. O., Christopher, M. S. and Pascal, D. K. (2014) Characterization of Palm Kernel Shall for Materials Reinforcement and Water Treatment. Journal of Chemical Engineering and Materials Sicence, 5(1), 1–6.
Fadzli, H. M., Yusof, I. M., Zulfikar, I. M., Alimuddin, Z. A. Z., Azman, M. M. and Khalil, A. M. (2016), An Experimental Study of Briquetting Process of Torrefied Rubber Seed Kernel and Palm Oil Shell. BioMed Research International, 11, 25–35.
Haryanti, N. H., Suryajaya, W. H., Husain, S., Noor, R., Anggraini, Y., Sofi, N. and Aprilia, D. (2021), Briquettes from Biomass Waste, National Seminar of Physics Education 2021, Journal of Physics: Conference Series 2104, 1742–6596.
Imeh, E. O., Mohammed-Dabo, I. A., Alewo, O. A., Okoduwa, S.I.R. and Fasanya, O. O. (2017), Production and Characterization of Biomass Briquettes from Tannery Solid Waste. Recycling, 2, 17–20.
Koleola, E. O., Tunji, J. E. and Ogunnaike, F.A. (2022), Grain Size Effects of Palm Kernel Briquettes on Calorific Value. International Journal of Engineering and Techniques, 8(4), 19–35.
Oguntunde, P. O. and Akintunde, M. A. (2019). Utilization of Agricultural Waste for Energy Generation. Nigerian Journal of Agricultural Engineering and Technology, 15(2), 34–42.
Ojaomo, K. E., Erinle, T. J. and Ogunnaike, F. A. (2022), Grain Size Effects of Palm Kernel Briquettes on Calorific Value. International Journal of Engineering and Techniques, 8(4), 6–15.
Oko, F. U. N. (2023), Efficient Use of Coconut and Its by Products, Eurasian Experiment Journal of Humanities and Social Sciences, 4(1), 14–17.
Olugbade, T. O., and Mohammed, T. I. (2015), Fuel Developed from Rice Bran Briquettes and Palm Kernel Shells. International Journal of Energy and Environmental Engineering, 5(2), 9–15.
Messay, E. G., Birhanu, A. A., Mulissa, J. M., Genet, T. A., Endale, W. A. and Gutema, B. F. (2021), Briquette Production from Sugar Cane Bagasse and Its Potential as Clean Source of Energy, African Journal of Environmental Science and Technology, 339–348.
Pratima, J. and Nausheen, J. (2021), Coconut Husk, A Lignocellulosic Biomass, As A Promising Engineering Material for Non-Wood Paper Production. Journal of Natural Fibers. 222–232
Senchi, D.S. and Kofa, I.D. (2020), Preparation of Biomass Briquettes from Corncob and Uncarbonized Rice Residues. ICONIC Research and Engineering Journals, 2456–8880
Shailesh, R. D., Vaishali, A. D. and Devayani, R. T. (2012), Coconut Husk as A Biosorbent for Methylene Blue Removal and Its Kinetics Study. Advances in Environmental Research, 223–236.
Stelte, W., Reddy, N., Barsberg, S. and Sanadi, A. R. (2023), Coir from Coconut Processing Waste as A Raw Material for Applications Beyond Traditional Uses. BioResources, 2187–2212.
Swapan, S. and Shalini, G. (2017), Pyrolysis of Coconut Husk Biomass: Analysis of its Biochar Properties Journal homepage: Tandfonline, 1556-1830.
Tulepov, M. I., Sassykova, L. R., Kerimkulova, A. R., Tureshova, G. O., Tolep, D. M., Zhapekova, A. O., Spanova, G. A., Abdrakova, F. Y. and Mansurov, Z. A. (2018), Preparation of Coal Briquettes and Determination of Their Physical and Chemical Properties. Oriental Journal of Chemistry, 80–185.
Ugwu, K. E. and Agbo, K. E. (2011), Briquetting of Palm Kernel Shell. Journal of Applied Science Environmental Management , 447–450.
Wiseman, T. N. (2017), Production of Briquettes from Prosopis Juliflora Stem and Anthill Soil. International Journal of Novel Research in Physics Chemistry and Mathematics, 2394–9651.
Wolfgang, S., Narendra, R., Soren, B. and Anand, R. S. (2023), Coir from Coconut Processing Waste as a Raw Material for Applications Beyond Traditional Uses. BioResources 18(1), 2187-2212.
- Downloads
- Published
- 2025-11-28
- Section
- Articles
- License
-
Copyright (c) 2025 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- O. A. Adetola, O. J. Olukunle, T. L. Aremu, Investigation of The Effects of Yield On Selected Physical Properties of Cassava Tubers , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 10 No. 2 (2016): FUTA Journal of Engineering and Engineering Technology
- FADUGBA O.G., EVALUATION OF STRENGTH AND LEACHING PROPERTIES OF SNAIL SHELL ASH (SSA) REMEDIATED PETROLEUM HYDROCARBON CONTAMINATED LATERITIC SOILS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- OLAJIGA, Samuel Olaniyi, Amu, Olugbenga Oludolapo , EFFECTS OF RICE HUSK ASH ON THE OPTIMUM LIME -STABILIZED LATERITIC SOILS USED FOR ROAD CONSTRUCTION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 2 (2025): FUTA Journal of Engineering and Engineering Technology
- J. A.V. Famurewa, E. T. Faboya, The Effects of Drying Temperature on the Physicochemical Properties of Ogbono (lrvingia Gabonensis) , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 1 (2017): FUTA Journal of Engineering and Engineering Technology
- I. O. Oladele, O. G. Agbabiaka, A. S. Ogunbadejo, M. A. Okoro, Assessment of Mechanical Properties of Hybrid Composites Based on Polypropylene and Vegetable Fibers , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 2 (2015): FUTA Journal of Engineering and Engineering Technology
- Tasiu Ashiru Sulaiman, Ibrahim Aliyu, Yusuf Yau, Ibrahim Bello, ASSESSMENT OF GROUNDNUT SHELL ASH AND SAWDUST ASH AS PARTIAL REPLACEMENT OF CEMENT IN CONCRETE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 2 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- J. T. Fasinmirin, A. J. Adesigbin, Tillage Effects on Some Soil Physical Properties and Yield of Cowpea (Vigna unguiculata) in the Humid Rain Forest of Akure, Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 2 (2015): FUTA Journal of Engineering and Engineering Technology
- O P FAPETU, A O AKINOLA, L L LAJIDE, A B OSASONA, PHYSICOCHEMICAL CHARACTERISTICS STUDY OF OIL EXTRACTED FROM RAFFIA PALM SEED , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- T. S. Mogaji, A. Akinsade, M. A. Akintunde, Pyrolysis of Sugarcane Bagasse for Bio-Oil Production , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- O. M. Adebajo, , Prof. Oluyemi-Ayibiowu, B. D. , K. E. Falola, , ASSESSMENT OF SELECTED MACHINE LEARNING SYSTEMS IN PREDICTING THE RESILIENT MODULUS OF COHESIVE SOILS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 2 (2025): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.
