A COMPARATIVE ANALYSIS OF PREDICTIVE MODELS FOR HOUSEHOLD ENERGY CONSUMPTION IN LAGOS
- Authors
-
-
Raheem, W. A.,
University of Lagos, Lagos State, Nigeria
-
Omiyale, A. D
University of Lagos, Lagos State, Nigeria
-
Odeyinka, O. F.
Corona College of Education, Lagos, Lagos State, Nigeria
-
Folorunso, C
Corona College of Education, Lagos, Lagos State, Nigeria
-
- Keywords:
- Artificial neural networks, autoregressive integrated moving average, energy consumption, linear regression, machine learning
- Abstract
-
Rapid urbanisation, unreliable electricity supply, and increasing reliance on electrical appliances have heightened residential energy demand and created the need for accurate prediction of household energy usage. While deep learning and hybrid predictive models have been increasingly applied to energy forecasting globally, their use in African contexts remains comparatively limited, with relatively few studies addressing the added complexities of infrastructural fragility and diverse user behaviours. In Nigeria, there has been limited effort in comparative modelling research, particularly at the household level, where energy behaviour is shaped by a complex interplay of socio-economic and infrastructural factors. This study examines household energy consumption patterns in Lagos, Nigeria, using a comparative, multi-model approach. Data from 350 households, including socio-economic status, appliance usage, billing methods, and conservation practices were collected and analyzed. The results of four predictive models, Linear Regression, Artificial Neural Networks (ANN), AutoRegressive Integrated Moving Average (ARIMA), and a hybrid ARIMA–Long Short-Term Memory (LSTM) model, were compared. Findings indicate that household income, dwelling type, and appliance usage are significant predictors of electricity consumption. Among the models, the hybrid ARIMA–LSTM achieved the best performance (RMSE of 580, MAE of 400, R² of 0.85), combining the strengths of both linear and non-linear modeling. The ANN model also demonstrated strong predictive accuracy (R² of 0.79), while linear regression was limited by its inability to capture complex relationships. The results highlight the potential of integrating machine learning into urban energy planning. Policymakers could use these insights to support targeted interventions such as smart metering, appliance subsidies, and behaviour-based demand management.
- Author Biographies
- References
-
Adamu, M. B., Adamu, H., Ade, S. M. and Akeh, G. I. (2020). Household Energy Consumption in Nigeria: A Review on the Applicability of the Energy Ladder Model. Journal of Applied Sciences and Environmental Management, 24(2), 237–244.
Bamidele, B., Omowumi, O. and Nathaniel, O. (2020). Investigating Electricity Consumption in Ogun State, Nigeria. Journal of Engineering Studies and Research, 26(1), 1- 10.
Baur, L., Ditschuneit, K., Schambach, M., Kaymakci, C., Wollmann, T. and Sauer, A. (2024). Explainability and Interpretability in Electric Load Forecasting Using Machine Learning Techniques - A Review. Energy and AI, 16, 1 -13.
Giacomazzi, E., Haag, F. and Hopf, K. (2023). Short-Term Electricity Load Forecasting Using the Temporal Fusion Transformer: Effect of Grid Hierarchies and Data Sources. Proceedings of the 14th ACM International Conference on Future Energy Systems, 353–360.
Jang, J., Kim, B. and Kim, I. (2024). Comparative Analysis of Deep Learning Techniques for Load Forecasting in Power Systems Using Single?Layer and Hybrid Models. International Transactions on Electrical Energy Systems, 1, 1-22.
Ji, X., Huang, H., Chen, D., Yin, K., Zuo, Y., Chen, Z. and Bai, R. (2022). A Hybrid Residential Short-Term Load Forecasting Method Using Attention Mechanism and Deep Learning. Buildings, 13(1), 72, 1 -20.
Lim, B., Ar?k, S. Ö., Loeff, N. and Pfister, T. (2021). Temporal Fusion Transformers for interpretable multi-horizon time series forecasting. International Journal of Forecasting, 37(4), 1748–1764.
Lundberg, S. and Lee, S.-I. (2017). A Unified Approach to Interpreting Model Predictions (No. arXiv:1705.07874), 4768 - 4777
Nti, I. K., Teimeh, M., Nyarko-Boateng, O. and Adekoya, A. F. (2020). Electricity load forecasting: A systematic review. Journal of Electrical Systems and Information Technology, 7(1), 13, 1-19.
Onatunji, O. G. (2025). Electricity consumption and industrial output: fresh evidence from economic community of West African states (ECOWAS). Journal of Economic and Administrative Sciences, 41(1), 381–398.
Onyenandu, N. N., Ishola, T. O. and Udu, A. A. (2025). Innovations in Electricity Infrastructure and Small Enterprises Sustainability in Lagos State, Nigeria. NIU Journal of Social Sciences, 11(1), 191–205.
Sharma, G., Chandra, S., Yadav, A. K., Singh, R. and Gupta, R. (2024). A Reliable Estimation of Solar Energy Prediction Through the use of Hybrid CNN-LSTM Algorithm. 2024 2nd International Conference on Advancements and Key Challenges in Green Energy and Computing (AKGEC), 1–6.
Somoye, O. A. (2023). Energy crisis and renewable energy potentials in Nigeria: A review. Renewable and Sustainable Energy Reviews, 188, 113794.
Suhartono, Puspitasari, I., Akbar, M. S. and Lee, M. H. (2012). Two-level seasonal model based on hybrid ARIMA-ANFIS for forecasting short-term electricity load in Indonesia: 2012 International Conference on Statistics in Science, Business and Engineering, ICSSBE 2012. ICSSBE 2012 - Proceedings, 2012 International Conference on Statistics in Science, Business and Engineering, 634–638.
Trading Economics. (2025). Crude Oil Production—Countries—List. https://tradingeconomics.com/country-list/crude-oil-production
Ubani, O., Sam-Amobi, C., Mba, E., Idu, E., Ezeama, E. and Oforji, P. I. (2024). Household electricity consumption determinants in major Nigeria cities. Journal of Infrastructure, Policy and Development, 8(3), 1- 19.
Ugbehe, P. O., Diemuodeke, O. E. and Aikhuele, D. O. (2025). Electricity demand forecasting methodologies and applications: A review. Sustainable Energy Research, 12(1), 1 - 32.
- Downloads
- Published
- 2025-11-28
- Section
- Articles
- License
-
Copyright (c) 2025 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- Ubochi, B. C, Olawumi, A. E., , Shuiabu, A. O. , Akingbade, K. F, A WEARABLE FACIAL RECOGNITION DEVICE FOR THE VISUALLY IMPAIRED , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- Adewuyi, Gideon Akinyemi, Daso, Akindele Wellington, Oke, Peter Kayode, INVESTIGATION AND CHARACTERIZATION OF ELEMENTAL COMPOSITION OF SOLAR PANEL , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- S. O. Abdulraman, B. M. Olaleye, M. A. Saliu, Equipment Maintenance Management Audit of Some Granite Aggregate Quarries in Part of South - West Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 10 No. 1 (2016): FUTA Journal of Engineering and Engineering Technology
- Oyebola Olabinjo, STORABILITY POTENTIAL OF CARROT (Daucuscarota L.) UNDER STEM SPONGE PADDED EVAPORATIVE COOLING STRUCTURES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- O. O. Awopetu, P. K. Farayibi, K. A. Ismail, Optimization of Major Process Parameters for Surface Roughness of ASTM 25 Grey Cast Iron using Taguchi method , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 2 (2017): FUTA Journal of Engineering and Engineering Technology
- Catherine Mayowa Ikumapayi, Samuel Lambe Akingbonmire, EFFECTS OF BAMBOO LEAF AND LOCUST BEANS POD ASHES ON AUTOGENOUS SHRINKAGE STRAIN AND COMPRESSIVE STRENGTH OF MORTAR , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- Ojo Oluwole Timothy , 2Adeniji Toyosi Adelowokan, DEVELOPMENT OF A BIOMETRIC, FACIAL RECOGNITION AND AUTHENTICATION SYSTEM FOR CLASS ATTENDANCE MANAGEMENT , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- J. O. Amigun, Seismic Inverted Acoustic Impedance for Lithofacies Discrimination and Reservoir Fluids Prediction: A Case of ‘Ovi’ Field, Niger Delta , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- Adekoya A. A, Adelabu, O. S. , Kolawole, F. O., DESIGN OF A DUAL DELTA FUSED DEPOSITION MODELLING 3D PRINTER FOR STUDIO CERAMICS PRODUCTION IN NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- I. M. Sanni, H. A. Ahmed, U. A. Abubakar, S. A. Abdullahi, Spatio-Temporal Analysis of Temperature Trend Of Hadeija-Jama’are River of the Chad Basin in Northern Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 1 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
You may also start an advanced similarity search for this article.
