DESIGN AND SIMULATION OF TURBOCHARGER-DERIVED MICROTURBINE SYSTEM FOR COMBINED HEAT AND POWER GENERATION

Authors

  • Mogaji, T.S

    Federal University of Technology, Ondo State, Nigeria

  • Egunbiyi, T.O

    Federal University of Technology, Ondo State, Nigeria

DOI:
https://doi.org/10.51459/futajeet.2023.17.1.572
Keywords:
Design, simulation, turbocharger-derived microturbine, heat and power generation
Abstract

In this study, an analytical design and numerical simulation of components of turbocharger-derived microturbine co-generator was carried out to assess the feasibility or workability of a turbo-charger derived microturbine for combined heat and power generation. A simple gas turbine or Brayton cycle was modeled analytically as the working cycle and validated with GasTurb13. An external combustion chamber of Tubo-annular type was adopted and modeled. The combustion characteristic was simulated using ANSYS Fluent 2021R1. A tube-in-tube heat exchanger was selected as the heat recovery unit, modeled and simulated using ANSYS Fluent 2021R1. Theoretical predictions with less than 3% variation in the outlet temperature of the designed system heat exchanger component is found closely matched with the numerical simulation results obtained in this study. Other simulation results carried out showed that the design is considered safe and fit for fabrication. The system when fabricated can be used for heat and power generation efficiently as designed for.

 

Author Biographies
  1. Mogaji, T.S, Federal University of Technology, Ondo State, Nigeria

    Department of Mechanical Engineering, School of Engineering and Engineering Technology

  2. Egunbiyi, T.O, Federal University of Technology, Ondo State, Nigeria

    Department of Mechanical Engineering, School of Engineering and Engineering Technology

References

Adam, H. (2012). Scaling 3 – 36 kW Microturbines. Conference: Proceedings of ASME

Turbo Expo 2012.

Barna, C. (2020), Current Socio-Economic Challenges. Approaching Sustainability and

Social Economy, Manag. Dyn. Knowl. Econ., 8(1): 7–9

Frizziero, L.; Rocchi, I.; Donnici, G.; Pezzuti, E. (2015) Aircraft diesel engine

turbocompound optimized. JP J. Heat Mass Transf, 11: 133–150.

Gnielinski, V. (1976) New equations for heat and mass transfer in turbulent pipe and channel

flow, International Journal of Chemical Engineering. 16 (2): 359-368.

Keerthana C., Anbarasan T., Preethi D., Vairamuthu N. (2019) Design and Analysis of a

Combustion Chamber in a Gas Turbine. International Journal of Engineering Research &

Technology, 7:1-5

Laurel T. (2004). Design and Performance of Gas Turbine Engine from Automobile

Turbocharger. A Bachelor of Science Thesis submitted to Department of Mechanical

Engineering, Massachusetts Institute of Technology. 1-46

Lefebvre, A. H. (1983). Gas Turbine Combustion. Washington Hemisphere Pub. Corp.,

c1983 xvii, 531 p.: ill.; 25 cm.

Luca M. (2021) Performance analysis and dynamics of innovative SOFC hybrid systems

based on turbocharger-derived machinery, PhD Thesis, Department of Mechanical,

Energy, Management and Transportation Engineering, University of Genoa Polytechnic

School, 1-221

Maryam M., Maghanki B., Ghobadian G., Najafi R., Janzadeh G.(2013). Micro combined

heat and power (MCHP) technologies and applications. Renewable and Sustainable

Energy Reviews, 28(C): 510-524.

Manabe, S., (2019) Role of Greenhouse Gas in Climate Change Tellus A Dyn. Meteorol.

Oceanogr.71(1): 1620078.

Melconian, J. O and Modak, A. T. (1985). Combustor design. In: SAWYER, JAW. (Ed.)

Sawyer’s gas turbine engineering handbook design. Volume 1, Theory & design. 3. ed.

Connecticut: Turbo machinery International Publications, 1985. v.1, Chapter. 5: 1-5.

Piancastelli, L.; Frizziero, L.; Bombardi, T. (2014) Bézier Based Shape Parameterization in

High Speed Mandrel Design. Int. J. Heat Technol. 32: 57–63

Piancastelli, L.; Gatti, A.; Frizziero, L.; Ragazzi, L.; Cremonini, M. (2015) CFD Analysis of

the Zimmerman’s V173 Stol Aircraft. ARPN J. Eng. Appl. Sci., 10: 8063–8070

Ramon S. and Pedro T. L. (2013). Premliminary Design of a Combustion Chamber for

Microtubine based in an Automotive Turbocharger. Proceeding of 22nd International

Congress of Mechanical Engineering (COBEM 2013), Ribeirão Preto, SP, Brazil , 412-

421

Rashid S. and Eljah M. (2019). Design and Analysis of Annular Combustion Chamber for a

Micro Turbojet Engine. International Journal of Aerospace and Mechanical Engineering,

13: 4-17

Usman B. (2019). Converting an automobile turbocharger into a micro gas turbine. E3S Web

of Conferences 95, 02008 (2019), 1-4 https://doi.org/10.1051/e3sconf/20199502008

Shah, R.K. (2005) Compact Heat Exchangers for Microturbines. In Micro Gas Turbines ,( 2–-

18)

Cover Image
Downloads
Published
2023-05-31
Issue
Vol. 17 No. 1 (2023): FUTA Journal of Engineering and Engineering Technology
Section
Articles
License

Copyright (c) 2023 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Copyright

With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.

How to Cite

DESIGN AND SIMULATION OF TURBOCHARGER-DERIVED MICROTURBINE SYSTEM FOR COMBINED HEAT AND POWER GENERATION. (2023). FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY, 17(1), 102-113. https://doi.org/10.51459/futajeet.2023.17.1.572

Similar Articles

51-60 of 110

You may also start an advanced similarity search for this article.