Assessment of Cost Effectiveness of Borehole Drilling in Oyo State, Nigeria
- Authors
-
-
M. M. Melodi
Department of Mining Engineering, The Federal University of Technology Akure, Nigeria
-
O. S. Adekinya
Department of Mining Engineering, The Federal University of Technology Akure, Nigeria
-
- Keywords:
- Array, Array, Array, Array, Array
- Abstract
-
This study assesses the cost-effectiveness of borehole drilling in Nigeria using Oyo State as a case study. Fifteen (15) borehole drilling companies designated A to O were examined in the study area. Data collected using questionnaires covers the cost items estimated in industrial and domestic borehole drilling. Regression analysis was carried out to and the significant cost effectiveness of industrial borehole drilling in the study area. Number of skilled labour, number of unskilled labour, number of drilling rig, number of terrameter, frequency of maintenance, number of casing, drilling equipment, submersible pump, water analysis/treatment, casing type, site accessibility and skills availability among others were discovered insignificant determinants of cost effectiveness of industrial borehole drilling in the study area at 5% level, (p > 0.05). It is also noted that these factors do not have a combined significant effect on the cost effectiveness of industrial borehole drilling (F = 8.138, p = 0.114) and determine 86.0% changes in cost effectiveness of industrial borehole drilling in the study area (Adj. R2 = 86.0%), while these variables determine 94.8% changes in cost effectiveness in domestic borehole drilling (Adj. R2 = 94.8%). The result of the t – test of comparison of mean difference between the mean cost of drilling a domestic and industrial boreholes revealed a significant mean difference between costs of producing a domestic borehole (323,333.33 Naira) and industrial boreholes (530,000 Naira). This difference was found to be significant at 5% level, (t = -11.808, p = 0.000). It is concluded that borehole drilling be cost effective while quality is not compromise thereby giving due value for investment.
- References
- Downloads
- Published
- 2019-05-03
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- T. S. Mogaji, Development of an Improved Vapour Compression Refrigeration System for Preservation of fresh Vegetables , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- Ogbozige, F.J., APPLICATION OF GIS TECHNIQUES IN GENERATING RAINFALL-IDF MAPS FOR UNGAUGED CATCHMENT: A CASE OF YENAGOA CITY, NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 2 (2023): FUTA Journal of Engineering and Engineering Technology
- O. M. Adebajo, , Prof. Oluyemi-Ayibiowu, B. D. , K. E. Falola, , ASSESSMENT OF SELECTED MACHINE LEARNING SYSTEMS IN PREDICTING THE RESILIENT MODULUS OF COHESIVE SOILS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 2 (2025): FUTA Journal of Engineering and Engineering Technology
- Fayose, F, Arowolo, M, Olajide, A., Adewale, D, DESIGN AND PRELIMINARY TESTING OF A SMALL-SCALE CASHEW HARVESTER , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 2 (2023): FUTA Journal of Engineering and Engineering Technology
- Emem Ayankop Andi , Ja’afaru Yahaya Bawa, Emem A. A, ’afaru Y. B, EFFECT OF DRILLING PARAMETERS ON DRILLING PERFORMANCE FACTORS IN HORIZONTAL WELLS USING SIMULATION APPROACH. , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- O. O. Awopetu, P. K. Farayibi, K. A. Ismail, Optimization of Major Process Parameters for Surface Roughness of ASTM 25 Grey Cast Iron using Taguchi method , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 2 (2017): FUTA Journal of Engineering and Engineering Technology
- IDOWU Abimbola Samson , ADEWUYI B.O, FOLORUNSO D.O, AKINWEKOMI A. D., OPTIMUM INFLUENCE OF CHROMIUM AND COMBINE AUSTEMPERING-CRYOGENIC TREATMENTS ON PERFORMANCE OF DUCTILE IRON , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- J. A.V. Famurewa, E. T. Faboya, The Effects of Drying Temperature on the Physicochemical Properties of Ogbono (lrvingia Gabonensis) , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 1 (2017): FUTA Journal of Engineering and Engineering Technology
- T O Awodola, FLEXURAL MOTION UNDER MOVING MASSES OF PRESTRESSED SIMPLY SUPPORTED PLATE RESTING ON BI-PARAMETRIC FOUNDATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- Akinola, A. O, Olusola, E. O, Olundegun, S. A1, DEVELOPMENT OF A PULVERIZING MACHINE FOR RAPHIA PALM SEEDS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.