Comparative Analysis of Path Loss Prediction Models for Selected Rural Areas in Ondo State, Nigeria
- Authors
-
-
W. O. Apena
Department of Electrical and Electronic Engineering, The Federal University of Technology, Akure. Nigeria
-
G. A. Oladunni
Biomedical Computing and Engineering Technology, Applied Research Group, Coventry University, Coventry, United Kingdom
-
- Keywords:
- Array, Array, Array, Array
- Abstract
-
The paper presents a comparison between the path loss prediction model derived for selected area in Ondo State, Nigeria and some existing models in the research empirical study was adopted due to the complexity of the terrain involved. Six of the existing models were used to investigate signal strength of Ondo State Radio-vision Corporation (OSRC) Television Signal in the rural areas of Idanre-Owena, Ondo State, Nigeria. The calculated path loss values were compared with measured data to obtain signal strength from Akure-Idanre via Owena route in Ondo State, Nigeria using root mean square errors (RMSEs) prediction performance (10-15 dB). The RMSEs results (14.5dB-25.0dB) showed that none of the six models values are close to the spot measured values. The study revealed that OSRC TV signal is cut off from major area in Idanre, therefore their frequency could be co-used by other service provider, in this area alone, to enhance links such as provision of broadband services to this area.
- References
- Downloads
- Published
- 2019-11-17
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- Samuel Olugbenga Oladele, MODELLING OF THIN-LAYER MICROWAVE DRYING OF BITTER LEAF SAMPLES (Vernonia Amygdalina) FOR PRESERVATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- Adebayo Felix Owa, Abdulahi Olawale Adebayo, Olawale Olarewaju Ajibola, Oluwole Daniel Adigun, Sunday Gbenga Aborisade, Fisayo Adesina, Corrosion Behaviour of Low Carbon Steel in Sulphide Medium Using Thevetia Peruviana as Inhibitor , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 2 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- Babatunde Oluwamayokun Soyoye, Abeebullah Bayonle Oguntayo, Peter Adeniyi Adeduntan, Timothy Oluwadamilare Adisa, Mobile Machine Learning Application for Early Detection of Cassava Diseases , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 1 (2026): FUTA Journal of Engineering and Engineering Technology
- Olaniran Oladayo, DRUG DELIVERY AND DEGRADATION OF BIOFILM – A REVIEW , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- George, U. D, Akpan, M. G, Onwe, D. N, MACHINE LEARNING CLASSIFIER FOR DALIUM GUINEENSE FRUIT USING ITS PHYSICAL PROPERTIES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 1 (2023): FUTA Journal of Engineering and Engineering Technology
- Alfred, V. A, Saliu, M. A, Omoegun, S.O. , Odeyemi, O. Y. , ASSESSMENT OF OXIDE PROPERTIES OF CLAY DEPOSITS FROM ANAMBRA GEOLOGICAL BASIN FOR THEIR SUITABILITY AS CERAMIC RAW MATERIALS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 1 (2023): FUTA Journal of Engineering and Engineering Technology
- B. K. Adeoye, A. I. Alao, A. D. Adeleke, U. Nwitte-Eze, ASSESSMENT AND PERFORMANCE EVALUATION OF STARCH MODIFIED EDIBLE COATING AND FILM ON TOMATO PRESERVATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- J. A.V. Famurewa, E. T. Faboya, The Effects of Drying Temperature on the Physicochemical Properties of Ogbono (lrvingia Gabonensis) , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 1 (2017): FUTA Journal of Engineering and Engineering Technology
- Adekoya A. A, Adelabu, O. S. , Kolawole, F. O., DESIGN OF A DUAL DELTA FUSED DEPOSITION MODELLING 3D PRINTER FOR STUDIO CERAMICS PRODUCTION IN NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- R. K. Apalowo, J. A. Kehinde, E. O. Oyeleke, O. J. Owoloja, S. O. Famuyiwa, MACHINE LEARNING OPTIMIZATION OF UNDERFILL FLOW TIME IN FLIP-CHIP ENCAPSULATION OF BGA ASSEMBLIES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 1 (2026): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.