Corrosion Behaviour of Low Carbon Steel in Sulphide Medium Using Thevetia Peruviana as Inhibitor
- Authors
-
-
Adebayo Felix Owa
Federal University Oye-Ekiti
-
Abdulahi Olawale Adebayo
Federal University Oye-Ekiti
-
Olawale Olarewaju Ajibola
Federal University Oye-Ekiti
-
Oluwole Daniel Adigun
Federal University Oye-Ekiti
-
Sunday Gbenga Aborisade
Federal University Oye-Ekiti
-
Fisayo Adesina
Rufus Giwa Polytechnic, Owo, Ondo State
-
- Keywords:
- Array
- Abstract
-
Corrosion cannot be completely stopped; however, the rate of corrosion can be retarded, hence the need for corrosion inhibitors. Corrosion process can be mitigated by the use of various chemical inhibitors; using green inhibitors is one of the methods used to control corrosion and still preserved the environment. The present study presents the extraction of thevetia peruviana extract using soaking method in Ethanol, and bio inhibitive properties of Thevetia peruviana fruit (TPF) extract on low carbon steel corrosion in sulphide solution. Low carbon steel samples were subjected to six sodium sulphide solution environments; five of the environments have TPF extract ranging from 10 ml to 50 ml while the 6th which served as control has no TPF extract. Weight loss experiment was carried out for 28 days and readings were taken at 4 days interval. Mechanical tests (impact test and tensile test) were also carried out on the low carbon steel samples. The results revealed that TPF extract exhibited inhibitive property at concentrations (10 ml, 20 ml, 30 ml, 40 ml and 50 ml), but the effect was more pronounced at higher concentrations (40 ml and 50 ml). The inhibitor with 50 ml of Thevetia peruviana extract showed the lowest corrosion rate of 0.0028 mm/yr on the 28th day and highest inhibition efficiency of 90% on the 8th day. Hence Thevetia peruviana extract was successfully used as inhibitor of low carbon steel in sulphide environment.
- References
- Downloads
- Published
- 2020-11-18
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- T. S. Mogaji, A. Akinsade, M. A. Akintunde, Pyrolysis of Sugarcane Bagasse for Bio-Oil Production , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- Obinna Obiora-Okeke, J. R. Adewumi, O. M. Ojo, IMPACT OF LAND USE AND LAND COVER CHANGES ON RUNOFF PREDICTION IN OGBESE RIVER WATERSHED , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- J. A. V. Famurewa, C. J. Oladejo, Isotherm Models of Tacca Starch (Tacca Involucrata) at Ambient Temperature Using Some Common Packaging Materials , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 10 No. 2 (2016): FUTA Journal of Engineering and Engineering Technology
- Oyebola Olabinjo, STORABILITY POTENTIAL OF CARROT (Daucuscarota L.) UNDER STEM SPONGE PADDED EVAPORATIVE COOLING STRUCTURES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- Adewuyi, Gideon Akinyemi, Daso, Akindele Wellington, Oke, Peter Kayode, INVESTIGATION AND CHARACTERIZATION OF ELEMENTAL COMPOSITION OF SOLAR PANEL , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- E I BELLO, F I OTU, T I OGEDENGBE, L LAJIDE, PERFORMANCE EVALUATION OF RUBBER SEED OIL BIODIESEL , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 2 (2018): FUTA Journal of Engineering and Engineering Technology
- J. A. Ajayi, C. M. Ikumapayi, O. J. Oyedepo, A. O. Olalemi, EFFECTIVENESS OF AGRO-WASTES MATERIALS IN MINIMIZING ALKALI-SILICA REACTIONS IN CONCRETE PAVEMENT , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 1 (2026): FUTA Journal of Engineering and Engineering Technology
- A D Dada, BRIDGING RESEARCH-INDUSTRY DIVIDE IN FOOD AND BEVERAGE ENTERPRISES: EMPIRICAL EVIDENCE FROM SOUTHWESTERN NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- Malomo, B.O., CRASHWORTHINESS AND ENERGY ABSORPTION ANALYSIS OF MESOCARP COIR-FIBRE/EPOXY RESIN-REINFORCED GLASS FIBER HYBRID COMPOSITE LAMINATE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 2 (2023): FUTA Journal of Engineering and Engineering Technology
- Folasade Dahunsi, Oluwasina Aderinwale, Abayomi Adesida, Abiola Alayande, J. Ojo, Oluwaseyi Falola, Oluwarotimi Dahunsi, DEVELOPMENT OF A SPACE TECHNOLOGY CAPACITY BUILDING INITIATIVE AT THE FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 1 (2021): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.