DAMPING EFFECTS ON THE DYNAMIC BEHAVIOUR OF BEAM-TYPE STRUCTURE WITH CLASSICAL BOUNDARY CONDITIONS UNDER MOVING DISTRIBUTED LOAD
- Authors
-
-
Dr. Kayode S. Famuagun
Adeyemi Federal University of Education Ondo
-
Prof. Tunbosun S. Oni
Federal University of Technology, Akure
-
- Keywords:
- Array, Array, Array, Array
- Abstract
-
This paper investigates damping effects on the dynamic behaviour of beam-type structure with classical boundary conditions. It is an extension of the work of Famuagun (2023). The problem is governed by a fifth order Partial Differential Equation which is reduced to second order, coupled ordinary differential equations through the finite generalized integral transform method. The analytical solution procedures involved Heaviside function expansion, a modified Struble asymptotic technique, and Laplace transformation. Numerical computations depict that both damping coefficients incorporated into the governing system, significantly reducing the displacement amplitude of the beam. However, damping due to resistance to transverse displacement possesses stronger effects compared to damping due to strain velocity. In addition, resonance is observed to occur earlier in moving mass case than in moving force case. Finally, the results illustrate the importance of damping parameters in influencing vibration of structural systems.
- Author Biographies
- References
-
Adams, G. G. (1995): Critical speeds and response of a tensioned beam on an elastic foundation to repetitive moving loads: J. Mech. Science, Vol. 37, No 7 pp 773-781. (1)
Crandall, S. H. (1970). The role of damping in vibration theory. Journal of Sound and Vibration, 11(1), 3-18. https://doi.org/10.1016/S0022-460X(85)81214-1
Famuagun K. S. (2023) Influence of damping coefficients on the response to moving distributed Masses of Rayleigh Beams resting on bi-parametric subgrade. Journal of the Nigerian Association of Mathematical Physics. Vol 65, pp 71-86.
Idowu, A.S., Titiloye, E.O., Dada, M.S. and Gbadeyan J. A. (2008): The effect of Viscons damping on the dynamic behaviour of rectangular plates resting on elastic foundation under moving loads: Jour. of inst. Of maths. And comp. Sciences. Vol. 21, No 2, 117-123.
Lan Ding, Hong-Ping Zhu and Li Wu (2016): Effect of axial load and structural damping on wave propagation in periodic Timoshenko beams on elastic foundation under moving load. Faculty of Engineering, China Union of Geoscience, Wuhan 430074 PR China.School of Engineering and Mechanic, Huozhong Union of science and Technology, Wuhan 430074 PR China.VOL380, Issue 31-32.233-532.
Oliveto G. and Greco A. (2002): Some observations on the characterization of structural damping. Journal of sound and vibration, 256(3), 391-415. Available online at http//www.idealibrary.com.
Oni, S.T. and Omolofe, B. (2011): Dynamic response of prestressed Rayleigh beam resting on elastic foundation and subjected to masses travelling at varying velocity, Journal of Vibration and Acoustics (USA). Vol. 133, pp 041005-1-15.
Titiloye E. O., Famuagun, K. S. and Gbadeyan J. A. (2014). The effect of damping on the dynamic response of beam subjected to distributed Load. Journal of the Nigerian Association of Mathematical Physics (NAMP), 26, 99-108.
Wu, Y. And Gao, Y. (2015): Analytical solutions for simply supported viscously damped double-beam system under moving harmonic loads. Journal of Engineering Mechanics for American Society of Civil Engineers. Vol. 141, No. 7.
- Downloads
- Published
- 2026-06-19
- Section
- Articles
- License
-
Copyright (c) 2026 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- C. N. Udekwe, A. O. Dahunsi, A. A. Ponnle, F. M. Dahunsi, K. B. Adedeji, ASSESSMENT OF ELECTROMAGNETIC WAVES EMISSION IN SELECTED BUILDINGS AT THE FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE: IMPLICATIONS FOR OCCUPATIONAL HEALTH AND RADIO FREQUENCY EXPOSURE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- Adewuyi, Gideon Akinyemi, Daso, Akindele Wellington, Oke, Peter Kayode, INVESTIGATION AND CHARACTERIZATION OF ELEMENTAL COMPOSITION OF SOLAR PANEL , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- Ikem, I.A., Akintunde, M. A, Titiladunayo, I. F, Awatt.E, INVESTIGATING THE THERMODYNAMIC CHARACTERISTICS OF ENERGY SAVING REFRIGERATING SYSTEM WITH COLD ACCUMULATOR , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 2 (2025): FUTA Journal of Engineering and Engineering Technology
- Oji, I. C., Ale, T. O, Odeyemi, C. S, MODELLING AND SIMULATION OF FAULTS AND FAULT LOCATION DETECTOR FOR RADIAL DISTRIBUTION SYSTEM , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- Y. O. Olasoji, Characterization of Noise in Narrowband Power Line Communications , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 1 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- A. O. Adedeji, The University as a Catalyst for Sustainable Development in Nigeria: A Case Study of the Federal University of Technology, Akure , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 2 (2014): FUTA Journal of Engineering and Engineering Technology
- Adekoya A. A, Adelabu, O. S. , Kolawole, F. O., DESIGN OF A DUAL DELTA FUSED DEPOSITION MODELLING 3D PRINTER FOR STUDIO CERAMICS PRODUCTION IN NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- O. O. Awopetu, Effect of Rake Face Reinforcement on Cutting Tool Life of Cemented Carbide Tools during Turning of a-Titanium Alloy , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 1 (2017): FUTA Journal of Engineering and Engineering Technology
- O O. Daramola, MECHANICAL PROPERTIES AND WEAR BEHAVIOUR OF KAOLINITE CLAY PARTICLES REINFORCED EPOXY MATRIX COMPOSITES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- Michael Emoekpere, Olayide R. Adetunji, Femi T. Owoeye, Koya, Abisoye, K., Adewale, T. Samuel, IN VITRO STUDY OF DIFFERENT SAMPLES OF 316 STAINLESS STEEL AS ORTHOPAEDIC BIOCOMPATIBLE MATERIALS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 1 (2026): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.
