INVESTIGATION OF OPTIMAL DRYING MEDIA FOR SELECTED AGRICULTURAL PRODUCE IN NIGERIA

Authors

  • Adeyi, T. A

    Lead City University, Ibadan, Nigeria.

  • Sadiq, T. O

    Institute, P.M.B 611, Akure, Nigeria

  • Olawore, A. S

    Kwara State University, Malete, Kwara State, Nigeria

  • Diji, C. J

    University of Ibadan, Ibadan, Nigeria.

DOI:
https://doi.org/10.51459/futajeet.2022.16.2.692
Keywords:
Array, Array, Array, Array, Array
Abstract

The study was carried out in the raining season to investigate the optimal drying medium for the four-selected agricultural crops common in the South-Western Nigeria. The four different crops used in the research were unripe plantain (Musa paradisiaca), okra (Abelmoschus esculentus L.), white yam (Dioscorea rotundata) and pepper (Capsicum annuum). All the samples except pepper were sliced to obtain a uniform thickness of 9, 5 and 3 mm for yam, plantain and okra, respectively. They were subjected to drying in an oven, solar dryer and open – sun for five days. The weight loss of each sample and temperature variations were taken as drying process progressed. The assessment of the crops in the oven, solar dryer and open – sun gave an average drying rate (g/hr); okra (7.29, 3.57 and 3.37), pepper (1.35, 1.08 and 0.86), yam (9.97, 5.69 and 6.26) and plantain (7.50, 4.81 and 4.16). Hence, the use of electric oven was found to be most effective while the open-sun medium is the least effective.

 

 

 

Author Biographies
  1. Adeyi, T. A, Lead City University, Ibadan, Nigeria.

    Mechanical Engineering

  2. Sadiq, T. O, Institute, P.M.B 611, Akure, Nigeria

    Engineering Materials Development Institute

  3. Olawore, A. S, Kwara State University, Malete, Kwara State, Nigeria

    Mechanical Engineering

  4. Diji, C. J, University of Ibadan, Ibadan, Nigeria.

    Mechanical Engineering

References

Aamir, M. and Boonsupthip, W. (2017). Effect of microwave drying on quality kinetics of okra. Journal of Food Science and Technology, 54(5), 1239-1247.

Alamu, E.O., Maziya-Dixon, B., Okonkwo, C.C. and Roberts, A. (2014). Physicochemical and bioactive properties of selected white yam (Dioscorea rotundata) varieties adapted to riverine areas of Nigeria. African Journal of Food Science, 8(7), 402-409.

Babu, A.K., Kumaresan, G., Raj, V.A.A. and Velraj, R. (2018). Review of leaf drying: Mechanism and influencing parameters, drying methods, nutrient preservation, and mathematical models. Renewable and Sustainable Energy Reviews, 90, 536-556.

Benke, K., and Bruce T. (2017). Future food-production systems: vertical farming and controlled- environment agriculture. Sustainability: Science, Practice and Policy, 13(1), 13-26.

Bezerra, C.V., Amante, E.R., de Oliveira, D.C., Rodrigues, A.M. and da Silva, L.H.M. (2013). Green banana (Musa cavendishii) flour obtained in spouted bed–Effect of drying on physico-chemical, functional and morphological characteristics of the starch. Industrial Crops and Products, 41, 241-249.

Epping, J. and Laibach, N. (2020). An underutilized orphan tuber crop—Chinese yam: A review. Planta, 252(4), 1-19.

Eze, J. and Agbo, K. (2011). Comparative studies of sun and solar drying of peeled and unpeeled ginger. American Journal of scientific and industrial research. 2(2): 136-143.

FAO, (2009). FAO Statistical Database, available from:

http://www.fao.org

Gemede, H.F., Ratta, N., Haki, G.D., Woldegiorgis, A.Z. and Beyene, F. (2015). Nutritional quality and health benefits of okra (Abelmoschus esculentus): A review. J Food Process Technol, 6(458), 28-37.

Hussein, J.B., Ilesanmi, J.O.Y., Filli, K.B. and Sanusi, M.S. (2018). Effects of drying methods on the chemical properties of okra (Abelmoschus esculentus L. Moench) slices. Current Journal of Applied Science and Technology, 26(6), 1-10.

Louis M. Nwokocha and Peter A. W. (2009). Some properties of white and yellow plantain (Musa paradisiaca, Normalis) starches. Carbohydrate Polymers, 76: 133–138.

Nidhul, K., Kumar, S., Yadav, A.K. and Anish, S. (2020). Computational and experimental studies on the development of an energy-efficient drier using ribbed triangular duct solar air heater. Solar Energy, 209, 454-469.

Odeku, O.A. (2013). Potentials of tropical starches as pharmaceutical excipients: A review. Starch-Stärke, 65(1-2), pp.89-106

Oko, A.O. and Famurewa, A.C. (2015). Estimation of nutritional and starch characteristics of Dioscorea alata (water yam) varieties commonly cultivated in the South-Eastern Nigeria. British Journal of Applied Science & Technology, 6(2), 145-152.

Raji, M.N.A., Ab Karim, S., Ishak, F.A.C. and Arshad, M.M. (2017). Past and present practices of the Malay food heritage and culture in Malaysia. Journal of Ethnic Foods, 4(4), 221-231..

Rashidi, M., Arabhosseini, A., Samimi-Akhijahani, H. and Kermani, A.M. (2021). Acceleration the drying process of oleaster (Elaeagnus angustifolia L.) using reflectors and desiccant system in a solar drying system. Renewable Energy, 171, 526-541.

Zarein, M., Samadi, S.H. and Ghobadian, B. (2015). Investigation of microwave dryer effect on energy efficiency during drying of apple slices. Journal of the Saudi Society of Agricultural Sciences, 14(1), 41-47.

Cover Image
Downloads
Published
2026-09-07
Issue
Vol. 16 No. 2 (2022): FUTA Journal of Engineering and Engineering Technology
Section
Articles
License

Copyright (c) 2022 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Copyright

With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.

How to Cite

INVESTIGATION OF OPTIMAL DRYING MEDIA FOR SELECTED AGRICULTURAL PRODUCE IN NIGERIA. (2026). FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY, 16(2), 18-30. https://doi.org/10.51459/futajeet.2022.16.2.692

Similar Articles

11-20 of 120

You may also start an advanced similarity search for this article.