SYNERGISTIC EFFECT OF CO-DIGESTING DIFFERENT MIX RATIOS OF WATER HYACINTH AND COW-DUNG FOR BIOGAS PRODUCTION.
- Authors
-
-
Ochuko Mary Ojo
1Department of Civil and Environmental Engineering, the Federal University of Technology, Akure, PMB 704, Ondo State, Nigeria
-
J O Babatola
ATODATECH LLC, 742 Locust St, #301, Pasadena, CA, USA 91101.
-
A A Adesina
3Department of Mechanical Engineering, the Federal University of Technology, Akure, PMB 704, Ondo State, Nigeria
-
A O Akinola
1. Department of Mechanical Engineering, The Federal University of Technology Akure, Ondo State. Nigeria.
-
Olurinde Lafe
Centre for Renewable Energy, the Federal University of Technology, Akure, PMB 704, Ondo State, Nigeria
-
- Keywords:
- Array
- Abstract
-
The synergistic effect of co-digesting water hyacinth (WH) with cow-dung (CD) for optimum biogas production was evaluated. Different mix ratios of WH to CD were digested in a laboratory scale anaerobic digester over a retention time of 40 days. The volume of biogas produced was determined using water displacement method. The ultimate biogas yield and synergy factors for all the mixes were calculated. The third order polynomial curve for the different mixes had a R2 value of 0.9834 which is quite significant. The curve also showed that the highest ultimate biogas yield of 141.72 L was produced by 2 WH: 8 CD and impressively makes it the best CD-aided WH digestion mix. The highest synergy factor of 1.31 was observed for 2 WH: 8 CD which collaborates the fact that the best mix of CD-aided WH digestion in terms of biogas yield is 2 WH: 8 CD.
- References
- Downloads
- Published
- 2019-04-29
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- S. O. Balogun, S. A. Yaro, M. Abdulwahab, A. Kasim, PRODUCTION AND CHARACTERIZATION OF ALUMINA NANOPARTICLES FROM GIRO CLAY VIA ACID LEACHING WITH SOL GEL METHOD , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 1 (2021): FUTA Journal of Engineering and Engineering Technology
- Oluwole Timothy Ojo, FINITE ELEMENT ANALYSIS OF REDESIGNED PIPE-WRENCH FOR OILFIELD SERVICING , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- Oladele, I.O, Akinwekomi, A.D, Ojo, O.O, Bichang’a, D.O, Adelabu S.O, Ezemenike, C. S, Adewumi, V.A, Taiwo, A.S, PARTIALLY REPLACED CEMENT BASED PAPER PARTICLES-WOOD SAW DUST-COCONUT FIBER CMPOSITES FOR LOW LOAD BEARING CAPACITY AND LIGHT-WEIGHT CIVIL CONSTRUCTIONS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 1 (2024): FUTA Journal of Engineering and Engineering Technology
- 1Obiora-Okeke, O. A, Owolabi, S. H , Adewumi, J. R, HYDRAULIC ASSESSMENT FOR SIGHTING A CONCRETE WEIR ON OGBESE RIVER FOR IRRIGATION , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- R. F. Falayi, P. A. Adeduntan, EFFECTS OF WOODASH AND SAWDUST ADMIXTURE ON ENGINEERING PROPERTIES OF BURNT LATERITE CLAY BRICKS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- T. E. Abioye, DEVELOPMENT OF A POULTRY DE-FEATHERING MACHINE WITH AN ADJUSTABLE BASIN , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- N G Olaiya, P K Farayibi, P K Oke, A REVIEW ON ADDITIVE MANUFACTURING: LASER TECHNOLOGY METHODS, DISTINCTIONS AND APPLICATIONS IN MANUFACTURING ENGINEERING , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 2 (2018): FUTA Journal of Engineering and Engineering Technology
- Babatunde Oluwamayokun Soyoye, Abeebullah Bayonle Oguntayo, Peter Adeniyi Adeduntan, Timothy Oluwadamilare Adisa, Mobile Machine Learning Application for Early Detection of Cassava Diseases , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 1 (2026): FUTA Journal of Engineering and Engineering Technology
- M. A. Musa, A. D. Akinwekomi, S. O. Seidu, PRODUCTION AND BIOMEDICAL POTENTIAL OF SILICA NANOPARTICLES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
- Ajaka, E. O, Omotehinse, A. O, Kaunda L, MODELS FOR OPERATIONAL CONTINUITY OF A PRECIOUS METAL MINE UNDER FLUCTUATING COMMODITY MARKET , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 2 (2023): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.