PHYSICOCHEMICAL CHARACTERISTICS STUDY OF OIL EXTRACTED FROM RAFFIA PALM SEED
- Authors
-
-
O P FAPETU
1. Department of Mechanical Engineering, The Federal University of Technology Akure, Ondo State. Nigeria.
-
A O AKINOLA
Department of Mechanical Engineering, The Federal University of Technology Akure, Ondo State. Nigeria.
-
L L LAJIDE
2Department of Industrial Chemistry, The Federal University of Technology, Akure, Nigeria
-
A B OSASONA
1. Department of Mechanical Engineering, The Federal University of Technology Akure, Ondo State. Nigeria.
-
- Keywords:
- Array
- Abstract
- The Physicochemical properties of the extracted oil from Raffia palm (Raphia regalis) were investigated. Physical properties such as refractive index, specific gravity, viscosity, moisture content, flash point, smoke point, fire point, pour point and cloud point; and chemical properties such as acid value, free fatty acid, saponification value, unsaponifiable matter, iodine value, ester value and peroxide value were investigated for both raw Raffia oil and transesterified raffia oil. The various properties were investigated using ASTM standard methods and calculations. Results obtained for physical properties: refractive index, specific gravity, viscosity, moisture content, flash point, smoke point, fire point, pour point and cloud point were 1.437, 0.765, 1.420 mm2/sec, 8.0%, 154ºC, 140ºC, 160ºC, -3ºC and -7ºC respectively for the raw Raffia oil, and 1.341, 0.840, 1.21 mm2/sec, 1.6%, 70ºC, 66ºC, 72ºC, -5ºC and -12º for the transesterified raffia oil. Results for the chemical properties: acid value, free fatty acid, saponification value, ester value obtained in (mgKOH/g), iodine value (mgI2/g), peroxide value (mEq/kg) and unsaponifiable matter (%) were determined to be, 18.849, 9.472, 136.043, 117.194, 5.076, 192.000 and 1.814% respectively for the raw Raffia oil; and 31.977, 16.069, 193.545, 161.568, 167.50, 350.800 and 2.481% for the transesterified raffia oil. It was concluded that Raffia oil when processed have great potentials for use as alternative fuel for energy generation.
- References
- Downloads
- Published
- 2019-04-29
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- Adekoya A. A, Adelabu, O. S. , Kolawole, F. O., DESIGN OF A DUAL DELTA FUSED DEPOSITION MODELLING 3D PRINTER FOR STUDIO CERAMICS PRODUCTION IN NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- S. O. Osuji, P. N. Ogbeifun, Strength Properties of Stabilised Laterite as Replacement of Sand in Sandcrete Block Production , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 2 (2015): FUTA Journal of Engineering and Engineering Technology
- A. D. Akinwekomi, I. O. Oladele, A. Oyetunji, Microwave Sintering and Characterisation of Magnesium Alloy AZ61/Carbon Nanotube Composites , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- O.A. ADEMESO, B.I. ADEYEMO, Physical and Mechanical Characteristics of the Conglomeratic Layer in Akure, Southwestern Nigeria. , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 2 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- E. O. Aiyewalehinmi, O. S. Aderinola, Strength Properties of Commercially Produced Sandcrete block in Ikeja: Lagos State , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 1 (2015): FUTA Journal of Engineering and Engineering Technology
- Adebayo Felix Owa, Abdulahi Olawale Adebayo, Olawale Olarewaju Ajibola, Oluwole Daniel Adigun, Sunday Gbenga Aborisade, Fisayo Adesina, Corrosion Behaviour of Low Carbon Steel in Sulphide Medium Using Thevetia Peruviana as Inhibitor , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 2 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- Kareem, B, Alabi, S. A., WORKPLACE REORGANISATION FOR PRODUCTIVITY ENHANCEMENT IN FAST MOVING GOODS INDUSTRY , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 1 (2023): FUTA Journal of Engineering and Engineering Technology
- H. A. Owolabi, B. V. Omidiji, A. O. Oke, A. T. Morakinyo, Development of a Small-Scale Motorized Dough Kneading Machine , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 2 (2017): FUTA Journal of Engineering and Engineering Technology
- J T Fasinmirin, D O Rapheal, J Lazarus, SOIL CHARCTERIZATION AND MAIZE (Zea mays L.) EVAPOTRANSPIRATION (ETc) IN OMU-ARAN HUMID GEOLOGICAL ZONE OF NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- R. K. Apalowo, J. A. Kehinde, E. O. Oyeleke, O. J. Owoloja, S. O. Famuyiwa, MACHINE LEARNING OPTIMIZATION OF UNDERFILL FLOW TIME IN FLIP-CHIP ENCAPSULATION OF BGA ASSEMBLIES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 1 (2026): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.