Appraisal of Risk Identification and Response Techniques adopted on Building Projects in Rivers State, Nigeria
- Authors
-
-
O. A. Awodele
Department of Quantity Surveying, Federal University of Technology, Akure, Ondo State, Nigeria
-
- Keywords:
- Array, Array, Array, Array, Array
- Abstract
-
The performance of the construction industry in terms of meeting its objectives or goal has been invariably affected by risks, thereby leading to time and cost overruns. This research therefore assessed the risk identification and response techniques adopted on building projects in Rivers State, Nigeria with a view to enhancing projects performance in the study area. In achieving the aim of the study, primary data were collected through administration of questionnaires to 284 key construction stakeholders comprising the clients, consultants and contractors on completed public building projects in Rivers State, Nigeria. Out of the 284 questionnaires that were distributed, 158 were returned and found suitable for the analysis. Percentile was used for analyzing demographics of the respondents while mean item score was used for ranking of identified techniques. Kruskal Wallis H test was used for examining the differences in the sample means of different groups of respondents. The study revealed good level of awareness of the existing risk identification and response techniques. it was revealed from the study that utilization of past experience, brainstorming and study of project documents were the most used risk identification techniques while the risk transfer, risk reduction and risk sharing were the most utilized response techniques in building projects. The study recommended that stakeholders should visit locations, consult experts and make reference to databases, and historical data from similar projects during risk identification in order to complement the existing utilized techniques while diligently responding to construction risks in the order of transfer, reduction and avoidance were recommended consequent upon the effectiveness of these strategies.
- References
- Downloads
- Published
- 2019-05-03
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- A. S. Ogbiye, Lucia O. Agashua, Effects of concrete mixing fluid samples - fermented locust beans and sewage on the strength properties of self-healing concrete , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- Giwa A.M., Olatunji O. K. , Mohammed Dikko Almustapha, Muhammad.Z.Z, Agbon E.E, Yau.I, Sena Timothy Tersoo, SIGNAL MONITORING AND ANALYSIS FOR ENHANCED TRUSTWORTHINESS IN 5G TELECOMMUNICATIONS NETWORKS: AN OVERVIEW OF THE CHALLENGES FACED AND SOLUTIONS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 18 No. 2 (2024): FUTA Journal of Engineering and Engineering Technology
- O. A. George, T. Osibemekun, O. J. Sopeyin, MACHINE LEARNING–ENABLED RIDE-SHARING OPTIMIZATION: A CASE STUDY OF THE SLYFT APPLICATION AT UNILAG , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 1 (2026): FUTA Journal of Engineering and Engineering Technology
- J. O. Ojediran, J. T. Fasinmirin, O. P. Owa, Development and Performance Evaluation of an Indigenous Fish Feed Palletizing Machine , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 2 (2017): FUTA Journal of Engineering and Engineering Technology
- P. M. Enyong, Performance of a Short Transmission Line Module under Various Loads: A Comparative Evaluation , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 2 (2018): FUTA Journal of Engineering and Engineering Technology
- Dung, M. D.,, Anowai, S.I, Peter, J.A, Dapiya, S.H, Okechalu, J.N, Mawak, J.D, ASSESSMENT OF THE COMPRESSIVE AND SPLITTING TENSILE STRENGTHS OF BIOCONCRETE FROM UREOLYTIC BACTERIA. , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 2 (2023): FUTA Journal of Engineering and Engineering Technology
- A. S. Abubakar, Y. A. Sha'aban, Multiple Model Predictive Control for DFIG Based Wind Energy Conversion System , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- I. M. Sanni, H. A. Ahmed, U. A. Abubakar, S. A. Abdullahi, Spatio-Temporal Analysis of Temperature Trend Of Hadeija-Jama’are River of the Chad Basin in Northern Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 1 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- Arowojolu, E.O, Oniyide, G.O, AN ECONOMIC COMPARATIVE ANALYSIS OF EQUIPMENT OUTSOURCING AND OUTRIGHT PURCHASE FOR QUARRYING OPERATIONS AT FOUNTAIN COMPANY, AKURE, ONDO STATE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 19 No. 1 (2025): FUTA Journal of Engineering and Engineering Technology
- O. A. Olubunmi, O. F. Awe, T. R. Ayeni, O. J. Ogundipe, DEVELOPMENT OF A MICROCONTROLLER-DRIVEN OBSTACLE DETECTION AND NAVIGATION SMART EYEGLASSES FOR THE VISUALLY IMPAIRED , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. Special (2026): FUTA JEET: Special Issue on Innovative Solutions for Sustainable Living and Environmental Challenges: Engineering Perspectives
You may also start an advanced similarity search for this article.