DEVELOPMENT OF A SPACE TECHNOLOGY CAPACITY BUILDING INITIATIVE AT THE FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, NIGERIA
- Authors
-
-
Folasade Dahunsi
Electrical and Electronics Engineering Department, The Federal University of Technology, Akure, Nigeria
-
Oluwasina Aderinwale
Electrical and Electronics Engineering Department, The Federal University of Technology, Akure, Nigeria
-
Abayomi Adesida
Electrical and Electronics Engineering Department, The Federal University of Technology, Akure, Nigeria
-
Abiola Alayande
Electrical and Electronics Engineering Department, The Federal University of Technology, Akure, Nigeria
-
J. Ojo
Electrical and Electronics Engineering Department, The Federal University of Technology, Akure, Nigeria
-
Oluwaseyi Falola
Mechanical Engineering Department, The Federal University of Technology, Akure, Nigeria
-
Oluwarotimi Dahunsi
Mechanical Engineering Department, The Federal University of Technology, Akure, Nigeria
-
- Keywords:
- Capacity building, Space Technology, Quadcopter, Demonstration Satellite
- Abstract
-
Satellite communication is a wireless means of transmission of intelligible signals/information. When properly utilized it will bring about a great and positive development on the economic growth of any nation. The Federal Government of Nigeria made a giant step in the communication sector by launching five satellites into space: NigeriaSat-1, NigComSat- 1, NigeriaSat-2r, NigeriaSat-X and NigComSat-1R. With adequate spatial information, informed decisions can be made by stakeholders and adequate steps taken to ensure the growth of the nation. Demand for training capacity building in space technology is increasing. Unfortunately, space technology is a relatively expensive field with ongoing research for affordable training approaches. This paper presents methods of building capacity by developing Demo Satellites that receive telemetry data with radiofrequency and internet of things communication protocol. Web Dashboard was developed for remote monitoring of ground station and for exploring mobility in data communication, Localization was achieved to also track the Demo Satellites and the ground station in real-time. It is shown that the implementation of a low-cost capacity building programme is not only possible but a goal that should be aimed at. Multiple segments in the design of the schematics produced can be reused. It presents a pioneer satellite constellation prototype that displays the capabilities of a satellite in solving some of the country’s challenges and creating awareness on space research and its trends.
- References
-
Aro, H. O., and Adetoro, L. (2011). Nigeria Space Programs, National Space Research and Development Agency (NASRDA), Abuja, Federal Republic of Nigeria.
Boroffice, R. (2008). The Nigerian space programme: an update. African Skies, 12(40).
Dahunsi F. M., Dahunsi O. A., Olaide A. A. and Akinyede J. A. (2019). Space Science and Technology Research in Nigerian: Case of The Federal University Of Technology, Akure. In e-Proceedings of the 2019 SEET Annual Conference, Akure, 25th to 27th August 2019.
Levine G. (2020) Visualize Data from Sensors Using Arduino + Coolterm. Accessed 19th March 2020 from https://www.instructables.com/Visualize-data-from-sensors-using-Arduino-coolte/
Isoun, T. (2008). Space Landings. Nature, 456(35).
Jiménez, A. C., Jenkins, M., and J.C., G. (2017). SETec: The First Small-Satellite Dedicated Laboratory of Central America. 1st IAA Latin American Symposium on Small Satellites: Advanced Technologies and Distributed Systems.
Lawal, L. S., and Chatwin, C. R. (2012). The future of wireless communications in Africa. Future Wireless Networks and Information Systems: Springer, 243-251.
National Committee for Space and Radio Science. (2017, September). National Space Plan: A vision for space science and technology in Australia. Australian Academy of Science, pp. 1-23.
OECD. (2008). Science, Technology and Industry Outlook 2008. Organisation for Economic Co-operation and Development (OECD).
The Mathswork, Inc (2020) ThingSpeak for IoT projects. Accessed 19th March 2020 https://thingspeak.com/
Union of Concerned Scientists. (2013, November). Strategic Options for Chinese Space Science and Technology. In G. Kulacki (Ed.). China: Union of Concerned Scientists.
- Downloads
- Published
- 2021-04-06
- Section
- Articles
- License
-
Copyright (c) 2021 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- C. O. Ijagbemi, D. T. Oloruntoba, A. O. Adeoye, Development of a Bioplastic Film for Food Packaging , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 1 (2014): FUTA Journal of Engineering and Engineering Technology
- O. A. Dahunsi, M. O. Adeoti, O. O. Awopetu, F. O. Aramide, O. O. Alabi, A. S. Abdulkareem, Characterization of Saman-Burkono (Nigeria) Graphite for Crucible Production , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- E. O. Aiyewalehinmi, O. S. Aderinola, M. O. Tanimola, An Investigation into Building Functional Failures in Nigeria (A Case Study of Ibadan, Oyo State Capital) , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 2 (2015): FUTA Journal of Engineering and Engineering Technology
- O. O. Alabi, T. A. Olatunji, Y. Gbadamosi, Geochemical and Mineralogical Characterization of Ore – Mineral Assemblages from Black Sands in Akure South Area, South - Western Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- K. O. Oladosu, E. O. Olafimihan, K. A. Babatunde, B. Kareem, A. A. Mustapha, Investigation of Staged Air supply on Grate Combustion of Palm Kernel Shell Mixed with Selected additives (Al2O3 and CaO) , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- O. A. Awodele, Appraisal of Risk Identification and Response Techniques adopted on Building Projects in Rivers State, Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 10 No. 1 (2016): FUTA Journal of Engineering and Engineering Technology
- A. S. Taiwo, I. O. Oladele, O. O. Daramola, A. D. Akinwekomi, O. G. Agbabiaka, Mechanical Wear Resistance and Water Absorption Properties of Particulate Palm Kernel Shell Reinforced Epoxy Composites for Automobile Application , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- W. A. Raheem, A. O. Ajayeoba, K. A. Adebiyi, O. R. Oyetunji, O. A. Ayeyemi, Ergonomic Evaluation of Base Transceiver Station Maintenance Personnel in Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- I. O. Oladele, O. G. Agbabiaka, O. S. Akinola, H. K. Talabi, Development of Sponge Fiber and Particulate Palm Kernel Shell Ash Reinforced Polypropylene Hybrid Composites , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 10 No. 2 (2016): FUTA Journal of Engineering and Engineering Technology
- Oluwatoyin Olaseinde, O. Ajanaku, O. M. Ojo, S. O. Seidu, COMPARATIVE STUDY OF THE REINFORCED STEEL BARS OBTAINED FROM A FAILED RESIDENTIAL BUILDING AND THE SHELVES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.
