IMPLEMENTION OF A DSPACE CONTROL SYSTEM FOR A NON-ISOLATED DC-DC BOOST CONVERTER
- Authors
-
-
John Macaulay
a College of Engineering, Swansea University, Bay Campus, Fabian Way, Swansea SA1 8EN, Wales, United Kingdom
-
Brendan Ubochi
Department of Electrical and Electronics Engineering, The Federal University of Technology, Akure
-
- Keywords:
- Boost converter, DSPACE control system, PI controller
- Abstract
-
This paper presents the use of the dSPACE rapid control prototype (RCP) control system to implement a feedback control system for a conventional Boost DC-DC converter hardware to validate the converter's operation and performance during the research and development stage. The proposed system was implemented and tested using a conventional Boost DC-DC converter and a dSPACE (RCP) based control strategy. The advantage of employing this control platform for the converter is that it allows for the identification of design errors in the development process without the requirement for complicated control coding. Details of the DC-DC boost converter operations, the converter feedback dSPACE control system experimental setup and experimental test results are all presented in the paper. The results show that the system can conform to any set desired reference voltage.
- References
-
Taghvaee, M. H., Radzi, M.A.M., Moosavain, S. M., Hizam, H. & Hamiruce, M. M. (2013). A Current and Future Study on Non-isolated DC-DC Converters for Photovoltaic Applications. Renewable and Sustainable Energy Reviews, 17(C), 216 - 227.
Grbovic, P. J. (2014). Ultra-Capacitors in Power Conversion Systems: Applications in Analysis and Design from Theory to Practice. Chichester, West Sussex, United Kingdom: John Wiley & Sons.
Jeremy, L, J, Ooi, C. A., Teh, J. (2020).Non-isolated Conventional DC-DC Converter Comparison for a Photovoltaic System: A review. Journal of Renewable and Sustainable Energy, 12 (1), 013502.
Raghavendra, K. V. G., Zeb, K., Muthusamy, A., Krishna, T. N. V., Kumar, S. V. S. V. P., Kim, D.-H, Kim, M.-S., Cho, H.-G., Kima, H.- J. (2019). A Comprehensive Review of DC-DC Converter Topologies and Modulation Strategies with Recent Advances in Solar Photovoltaic Systems. Electronics, 9 (1), 31.
Abdelsalam, M. E., Kamil, C. B. (2019). Non-isolated Multi-Port Inverter Topologies for Renewable Energy Applications: A Review. 1st Global Power Energy and Communication Conference (GPECOM), 321-330.
Khader, S. (2011). Design and Simulation of a Chopper Circuits Energized by Photovoltaic Modules. In 2011 IEEE GCC Conference and Exhibition (GCC), U.A.E., 73-76.
Mohan, N., Undeland, T. M., Robbins, W. P. (2003). Power Electronics: Converters, Applications and Design, Hoboken, N.J: John Wiley and Sons.
Varshney, A., Kumar, R., Kuanr, D., Gupta, M. (2014). Soft-Switched Boost DC-DC Converter System for Electric Vehicles using an Auxiliary Resonant Circuit. International Journal of Emerging Technology and Advanced Engineering, 4 (3), 845-850.
Mohamed, A., Mohamed. O. (2010). Smart Optimal Control of DC-DC Boost Converter in PV Systems. Proc. IEEE/PES Transmission and Distribution Conference and Exposition: Latin America, 403-410.
Bae, G.-T., Kang, F.-s. (2013). Bidirectional DC-to-DC Converter Employing a Selective Switch and Two Inductors for Optimal Operation in Buck and Boost Mode. Proc. International Conference Electrical Machines and Systems (ICEMS), 1727-1730.
- Cover Image
-
- Downloads
- Published
- 2021-04-06
- Section
- Articles
- License
-
Copyright (c) 2021 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- F. M. Dahunsi, S. O. Oluponna, Analysis of Energy Usage Pattern of a Nigerian University Digital Resource Center (DRC):: FUTA DRC as a Case Study , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- K. F. Akingbade, Development of Chemical Proportion Formulation Model for Quality Control in Flexible Polyurethane Foam Production , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 2 (2017): FUTA Journal of Engineering and Engineering Technology
- O. Hezekiah Adeyemi, B Julius Olorunfemi,, Olasunkanmi O Akinyemi, APPRAISAL OF RELATED RISKS WITH LOCALLY MADE BLOCK MAKING MACHINE: A MULTI-SITE CASE STUDY OF NIGERIA BLOCK MAKING INDUSTRY , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 2 (2018): FUTA Journal of Engineering and Engineering Technology
- Robert Oluwayimika Abolade, Oluwaseun Olayinka Tooki, David Oluwagbemiga Aborisade, REVIEW ARTICLE ON THE MITIGATION OF FOUR WAVE MIXING IN OPTICAL COMMUNICATION SYSTEM , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 1 (2021): FUTA Journal of Engineering and Engineering Technology
- C. O. Ijagbemi, Design and Optimization of A Gas Turbine Waste Heat Recovery System , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- S. O. Abdulraman, B. M. Olaleye, M. A. Saliu, Equipment Maintenance Management Audit of Some Granite Aggregate Quarries in Part of South - West Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 10 No. 1 (2016): FUTA Journal of Engineering and Engineering Technology
- Adebayo Felix Owa, Abdulahi Olawale Adebayo, Olawale Olarewaju Ajibola, Oluwole Daniel Adigun, Sunday Gbenga Aborisade, Fisayo Adesina, Corrosion Behaviour of Low Carbon Steel in Sulphide Medium Using Thevetia Peruviana as Inhibitor , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 2 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- O. O. Olubanjo, A. E. Alade, Development of a Low Cost Greenhouse and Drip Hydroponic Structure for Vegetable Production in South-West Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 1 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- A. O. Adedeji, The University as a Catalyst for Sustainable Development in Nigeria: A Case Study of the Federal University of Technology, Akure , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 2 (2014): FUTA Journal of Engineering and Engineering Technology
- Ashiru Mohammed, Ibrahim Aliyu, Hussaini Abdullahi Umar, Aliyu Umar Mani, PERFORMANCE EVALUATION OF RAILWAY BALLAST DEGRADATION USING THE MORPHOLOGICAL PROPERTIES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.