Evaluation of Akure 132kV Transformer Substation Load Growth Trend
- Authors
-
-
T. O. Ale
FEDERAL UNIVERSITY OF TECHNOLOGY AKURE, ONDO STATE
-
- Keywords:
- Growth trend, Load forecast, Moving average, Overloading
- Abstract
-
Statistical method of the least squares was used in long term load growth forecast based on retrospective load growth data (2003-2023) for Akure 132kV Injection substation. Growth trend was established and the smoothening of the actual growth dynamics was achieved by applying moving averages. The load growth trend line equations obtained enable the determination of load forecast estimate up to 2023. It was inferred from the results that the load growth forecast estimate for transformers, T1A, T2A, T3A and FUTA line are 19.24MW, 28.02MW, 45.02MW and 1.05MW respectively for a period of ten years.
- References
-
Nwachukwu, V. O. (2005): Introduction to Statistic. 5th Edition. Peace Publishers, Owerri, Nigeria 269pp.
Nwachukwu, V. O. (2006): Principles of Statistical inference. 2nd Edition. Zelon Enterprises, PortHarcourt, Rivers State 356pp
Oroge, C. O. (1991): Fundamentals of Reliability and Testing Methods. 1st Edition. Sooji Press Limited, Kaduna, Nigeria 166pp
Akure Business Unit (2003): Power Holding Company of Nigeria PLC,Akure Billing Register for FUTA
IEE (1981): Regulations for Electrical Installation. 15th Edition. 193pp.
Nagrath, I. J. and Kothari, D. P, (1994): Power System Engineering. Tata McGraw Publishing Company Limited 150pp
Olorunnisola, A. O. (2004): Technical Report Writing and Presentation. 1st Edition. Ibadan, Nigeria 89pp
Power Holding Company of Nigeria PLC, PHCN, (2007): Safety Rules and Standard Protection Codes. 41pp.
Skipper Electricals (2008): Power Transformer Testing gets a new Tool: FRATesting. Way Forward (3): 4-5
- Downloads
- Published
- 2019-01-02
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- A. O. Melodi, B. O. Akinloye, Transmission Capacity Enhancement for Nigerian Power Transmission Grid using TCSC and UPFC , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 2 (2014): FUTA Journal of Engineering and Engineering Technology
- Folasade Dahunsi, Oluwasina Aderinwale, Abayomi Adesida, Abiola Alayande, J. Ojo, Oluwaseyi Falola, Oluwarotimi Dahunsi, DEVELOPMENT OF A SPACE TECHNOLOGY CAPACITY BUILDING INITIATIVE AT THE FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE, NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 1 (2021): FUTA Journal of Engineering and Engineering Technology
- S. S. Yaru, POLLUTION OF VEHICULAR EMISSION ANALYSIS AT FEDERAL UNIVERSITY OF TECHNOLOGY AKURE NORTH GATE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 1 (2021): FUTA Journal of Engineering and Engineering Technology
- S. O. Abdulraman, B. M. Olaleye, M. A. Saliu, Equipment Maintenance Management Audit of Some Granite Aggregate Quarries in Part of South - West Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 10 No. 1 (2016): FUTA Journal of Engineering and Engineering Technology
- Babatunde Oluwamayokun Soyoye, Tehinse, T. O., Design and Fabrication of a Maize Shelling Machine , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 2 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- F. M. Dahunsi, S. O. Oluponna, Analysis of Energy Usage Pattern of a Nigerian University Digital Resource Center (DRC):: FUTA DRC as a Case Study , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- M. O. Oyeleye, Evaluation of Grid and Off-Grid Energy Consumption: A Case Study of Federal University of Technology, Akure (FUTA) , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- M. D. IDI, T. A. ALADESANMI, S. LUKMAN, M. A. ASANI, Y. M. USMAN, I. A. OKE, A NUMERICAL FORMULA AND COST BENEFIT OF GROUNDWATER RECHARGE IN MAIDUGURI, NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 2 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- E O Olutomilola, A Omoaka, THEORETICAL DESIGN OF A PLANTAIN PEELING MACHINE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 2 (2018): FUTA Journal of Engineering and Engineering Technology
- Oluwatoyin Olaseinde, O. Ajanaku, O. M. Ojo, S. O. Seidu, COMPARATIVE STUDY OF THE REINFORCED STEEL BARS OBTAINED FROM A FAILED RESIDENTIAL BUILDING AND THE SHELVES , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.