MODELS FOR OPERATIONAL CONTINUITY OF A PRECIOUS METAL MINE UNDER FLUCTUATING COMMODITY MARKET
- Authors
-
-
Ajaka, E. O
Federal University of Technology, Akure, Nigeria
-
Omotehinse, A. O
Federal University of Technology, Akure, Nigeria
-
Kaunda L
University of Namibia, JEDS Campus, Ongwediva, Namibia
-
- Keywords:
- Blending, dilution, homogenization, upgrading, feed of constant grade, ratio of concentration, enrichment ratio, changing commodity price.
- Abstract
-
Most precious metal (gold, copper) exploitations around the world normally operate mine and processing plant together because the economy of the metal production depends largely on the cost of mining and processing. Thus, mine and plant operations must be well integrated because the failure of one will affect the other and impede the success of the downstream metal extraction and refining processes. Many mines have been observed to suspend operations when the commodity (metal) price does not bring enough returns on investment as projected which is usually because of the low nature of the in-situ or natural grades of these resources and fluctuations in metal prices. This implies that to a good limit; the commodity price dictates the continuity of mine and plant operations. This article therefore intends to provide models that ensure continuity of operation even with fluctuating commodity price. The dependency of plant feed grade or resource cut-off grade on the commodity price was reviewed and mathematical models were developed from mine and plant variables such as ratio of concentration, enrichment ratio, plant feed grade, excavation plan, product weight and grade, commodity price, mining, processing and sundry costs, feed weight and value loss to integrate mine, plant and market. Data obtained from a gold mine was used to test and validate the models. The result is that using the models, material of constant grade is prepared as feed for the processing plant from different ore grades through blending, dilution and upgrading such that mine and plant operations will continue economically regardless of commodity price variation. The concept of this article was derived from observation of the unstable operations of some precious metal mines as a result of market fluctuations. Applying the models as recommended will ensure that mine and plant operations continue economically regardless of commodity price variation.
- Author Biographies
- References
-
Anderson, C. G. (2003), Fundamentals of Analysis Gold, Silver and Platinum Group Metals. Mineral Processing Plant Design, Practice and Control Proceedings Vol. 2, pp 1778 - 1805. Edited by Andrew Mular, Doug Halbe and Derek Barratt, Society for Mining, Metallurgy and Exploration Inc. (SME), Littleton, USA.
Asad, M. (2005). "Cutoff grade optimization algorithm with stockpiling option for open pit mining," International Journal of Surface Mining, Reclamation and Environment, pp. 176 - 187.
Black, F. and Scholes. M (2007): "The Pricing of Options and Corporate Liabilities," Journal of Political Economy, pp. 637- 654.
Dimitrakopoulos, R. and S. Sabour (2007): Evaluating mine plans under uncertainty: Can the real options make a difference?," Resources Policy, no. 32, pp. 116-125, 2007.
Halbe, D. and Smolik T. J. (2003): Project Operating Cost with Applications in Mine Planning and Risk Analysis. Mineral Processing Plant Design, Practice and Control Proceedings Vol. 1, pp 326 - 345. Edited by Andrew Mular, Doug Halbe and Derek Barratt, Society for Mining, Metallurgy and Exploration Inc. (SME), Littleton, USA.
Halupka, R. (2003): Mining Project Finance Explained. Mineral Processing Plant Design, Practice and Control Proceedings Vol. 1, pp 371 - 379. Edited by Andrew Mular, Doug Halbe and Derek Barratt, Society for Mining, Metallurgy and Exploration Inc. (SME), Littleton, USA.
Hickson, R.J. (2003): Success Strategies for Building New Mining Projects. Mineral Processing Plant Design, Practice and Control Proceedings Vol. 2, pp 2250 - 2274. Edited by Andrew Mular, Doug Halbe and Derek Barratt, Society for Mining, Metallurgy and Exploration Inc. (SME), Littleton, USA.
Mikael Collan, Jyrki Savolainen and Pasi Luukka (2017). Investigating the effects of Price and Process Selection on the Value of a Metal Mining Asset Portfolio. Mineral Economics.Vol.30, Issue 2, July 2017, pp 107 – 115.
Pindyck, S. (1991): Irreversibility, Uncertainty and Investment. Journal of Economic Literature, vol. 29, no. 3, 1991.
Saleki M, Kakaei R., and Alaei M., (2019). A mathematical Model for Simultaneous Optimization of the Ultimate Pit Limit and Block Sequencing in Open Pit Mine. Journal of Mineral Resources Engineering. Vol. 3 Issue 4, No. 10. pp 21 -39.
Smith, L. D. (2003): Financial Analysis and Economic Optimization. Mineral Processing Plant Design, Practice and Control Proceedings Vol. 1, pp 346 - 370. Edited by Andrew Mular, Doug Halbe and Derek Barratt, Society for Mining, Metallurgy and Exploration Inc. (SME), Littleton, USA.
Stewart, D.W. (2003): The Management and Control of Costs of Capital in Mineral Processing Plants. Mineral Processing Plant Design, Practice and Control Proceedings Vol. 2, pp 2230 - 2237. Edited by Andrew Mular, Doug Halbe and Derek Barratt, Society for Mining, Metallurgy and Exploration Inc. (SME), Littleton, USA.
Toovey, L. (2011): Introduction to gold assaying. Canadian Mining Journal, pp. 2-4.
Zurika Robinson (2019). Revisiting Gold Price Behaviour: A structural VAR. Mineral Economis. Vol 32, Issue 3. pp 365 – 372. August, 2019.
- Published
- 2023-11-30
- Section
- Articles
- License
-
Copyright (c) 2023 FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- J. A. Ajayi, C. M. Ikumapayi, O. J. Oyedepo, A. O. Olalemi, EFFECTIVENESS OF AGRO-WASTES MATERIALS IN MINIMIZING ALKALI-SILICA REACTIONS IN CONCRETE PAVEMENT , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 20 No. 1 (2026): FUTA Journal of Engineering and Engineering Technology
- J. A.V. Famurewa, E. T. Faboya, The Effects of Drying Temperature on the Physicochemical Properties of Ogbono (lrvingia Gabonensis) , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 1 (2017): FUTA Journal of Engineering and Engineering Technology
- Dung, M. D.,, Anowai, S.I, Peter, J.A, Dapiya, S.H, Okechalu, J.N, Mawak, J.D, ASSESSMENT OF THE COMPRESSIVE AND SPLITTING TENSILE STRENGTHS OF BIOCONCRETE FROM UREOLYTIC BACTERIA. , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 2 (2023): FUTA Journal of Engineering and Engineering Technology
- J. O. Ojediran, J. T. Fasinmirin, O. P. Owa, Development and Performance Evaluation of an Indigenous Fish Feed Palletizing Machine , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 2 (2017): FUTA Journal of Engineering and Engineering Technology
- Olanrewaju Oluwafemi Akinfala, Emmanuel Enyeribe Ege, Ladi Folorunso Ogunwolu, ARRIVAL PATTERNS AND TRAFFIC FLOW CHARACTERISTICS AT SIGNALIZED INTERSECTIONS: CONSIDERING UPSTREAM SIGNAL INFLUENCE AND TIME RESOLUTIONS , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 1 (2021): FUTA Journal of Engineering and Engineering Technology
- H. A. Owolabi, B. V. Omidiji, O. C. Falade, Optimization of Poultry Feeds Production Using Linear Programming Technique , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 9 No. 1 (2015): FUTA Journal of Engineering and Engineering Technology
- E I BELLO, F I OTU, T I OGEDENGBE, L LAJIDE, PERFORMANCE EVALUATION OF RUBBER SEED OIL BIODIESEL , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 2 (2018): FUTA Journal of Engineering and Engineering Technology
- C. O. Ijagbemi, D. T. Oloruntoba, A. O. Adeoye, Development of a Bioplastic Film for Food Packaging , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 1 (2014): FUTA Journal of Engineering and Engineering Technology
- O. A. Adetola, O. J. Olukunle, T. L. Aremu, Investigation of The Effects of Yield On Selected Physical Properties of Cassava Tubers , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 10 No. 2 (2016): FUTA Journal of Engineering and Engineering Technology
- Michael, O.S, Expired drugs , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 17 No. 2 (2023): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.
